NEWBIE HELP PLEASE!

[Perpetua]

Jul 13, 2014 19:14:18 GMT kitty778 said:

How do I decide between 1.8, 2.2 and 2.5 ohm?

Welcome to you kitty778.

Personally I always plump for 1.8ohm coils . . . they peak off anyway once you start using them. If you're using a variable voltage/wattage battery or device, essentially it makes no difference as you can always turn the setting up.

But 1.8 is still my preferred choice.

[hijack]

Jul 13, 2014 19:14:18 GMT kitty778 said:

How do I decide between 1.8, 2.2 and 2.5 ohm?

To be honest any of those Ohm will be ok. Try the 2.2 and when you get some replacement coils you can try the lower ones.

Generally the lower the Ohm the more power is used to heat the coil, and the hotter it heats up. Go for the middle ones, I got some 1.5 Ohm coils and didn't get on with them, but when I started using cotton to wick my homemade coils I found that 0.9 coils worked great.

Its all down to how fast the wick can deliver the liquid to the coil, if the liquid cant get to the coil fast enough youll get a burnt taste. So with a hot running coil there is more chance it will run dry.

Ill stop there as all you need to know is that any of the Ohm you listed should be fine.

[kitty778]

CHECKOUT TIME! Please can you check I'm not ordering anything idiotic, given my preferences upthread? Also, accessory guidance would be useful. Are there chargers and coils which would work on both set ups?

Me

• Protank 2 x 3
• Innokin itaste vv v3 express kit
• Kanger airflow control valve v2

Him

• Vision spinner v2
• Ego USB Charger
• Kanger Aerotank v2

It has taken me all day just to get as far as this and I haven't even started on juices yet! Thanks for all your help.

[kitty778]

Is the aerotank going to look silly on top of the spinner? Or is there a cone/ring or somesuch I could get?

[hijack]

Look pretty much ok to me.

Is that 3 protank2's your buying? or 1 protank2 and 1 protank3?

[hijack]

Jul 13, 2014 19:47:15 GMT kitty778 said:

Is the aerotank going to look silly on top of the spinner? Or is there a cone/ring or somesuch I could get?

You may want the thinner aerotank the thinner one will be flush with the battery.

[kitty778]

hijack three of protank 2. Is that overdoing things?

[hijack]

No that's fine you can keep different flavours in each one.

PS I would buy a second spinner2 as your partner will have to wait 3 hours when he charges his battery up.

[Perpetua]

I'd also get a couple of Ego USB chargers, they have a habit of going botty up when you least want kitty778, spares are always good with our gear.

Plus a mains USB plug . . . unless you've a USB hub to charge from?

[kitty778]

Jul 13, 2014 20:00:45 GMT Perpetua said:

I'd also get a couple of Ego USB chargers, they have a habit of going botty up when you least want kitty778, spares are always good with our gear.

Plus a mains USB plug . . . unless you've a USB hub to charge from?

We've a variety of mains adaptors for smartphone/tablet USB leads.  Will they do the job?

[kal-el1875]

If your running the 3 tanks at once maybe best to get 3 airflow controllers


Sent from my Death Star

[Perpetua]

Jul 13, 2014 20:06:14 GMT kitty778 said:

Jul 13, 2014 20:00:45 GMT Perpetua said:

I'd also get a couple of Ego USB chargers, they have a habit of going botty up when you least want kitty778, spares are always good with our gear.

Plus a mains USB plug . . . unless you've a USB hub to charge from?

We've a variety of mains adaptors for smartphone/tablet USB leads.  Will they do the job?

They should be fine Kitty . . . I'm always really wary of charging anything off a laptop.

[kitty778]

Does this have the wrong threading? fred

[hijack]

Jul 13, 2014 20:07:33 GMT kal-el1875 said:

If your running the 3 tanks at once maybe best to get 3 airflow controllers


Sent from my Death Star

That's a good point if the airflow on the protanks replace the standard base then get 3 or you will only be able to have one tank filled at a time.

[hijack]

Jul 13, 2014 20:14:13 GMT kitty778 said:

Does this have the wrong threading? fred

You want this one link for the spinners