First Dripper advice

[Romney]

Sept 11, 2014 16:24:56 GMT leo said:

Sept 11, 2014 15:44:36 GMT Romney said:

Hi leo,wheres the best place in the UK to buy the Veritas from?

Don't know... mine came from FT. Do love it though. If you're even thinking about a Veritas, get one! You'll love it.
James at Vapenquit has them listed as 'coming soon' at £12. You could drop him an email, he's a good guy.

 leo

[Romney]

Sept 11, 2014 15:55:27 GMT ruffdog said:

Romney I just had a look and most places are out of stock. byut here www.hogvaping.co.uk/product/veritas-rda/ has 2 left.

,thanks a lot ruffdog

[robby]

If you go for the Magma you will be getting a great atty, it really does leave most of the rest of them behind

[Romney]

Sept 11, 2014 16:40:45 GMT robby said:

If you go for the Magma you will be getting a great atty, it really does leave most of the rest of them behind

 robby,you have swayed me, ,im going to get the Magma,i looked at reviews on Fasttech,and a few reviews said Cons,hard to rebuild.So as im just new to dripping,the Magma seems the best for me.

[Romney]

Sept 11, 2014 17:08:00 GMT Romney said:

Sept 11, 2014 16:40:45 GMT robby said:

If you go for the Magma you will be getting a great atty, it really does leave most of the rest of them behind

 robby,you have swayed me, ,im going to get the Magma,i looked at reviews on Fasttech,and a few reviews said Cons,hard to rebuild.So as im just new to dripping,the Magma seems the best for me.

Meant reviews on the Veritas on Fasttech

[robby]

Really are not hard to build Romney, I have a review up in the review section

[leo]

Sept 11, 2014 17:18:36 GMT robby said:

Really are not hard to build Romney, I have a review up in the review section

x2.. the veritas is not hard to build. Depends how complicated you want to make it. But here's a quick 2 minute dual coil.
I think a lot of the reviewers on FT either don't have it, or are unaware of how it was designed to be coiled (see vid). not that you have to do it this way.
Single horizontal build is as easy as any other dripper out there (that's what I run on a daily basis, and it chucks better than some dual coils).
Anyway, you'll get as many opinions as there are members of the forum, so just go with the one you fancy... there will be a second and third following it soon enough i bet!!

[Romney]

Sept 11, 2014 17:50:38 GMT leo said:

Sept 11, 2014 17:18:36 GMT robby said:

Really are not hard to build Romney, I have a review up in the review section

x2.. the veritas is not hard to build. Depends how complicated you want to make it. But here's a quick 2 minute dual coil.
I think a lot of the reviewers on FT either don't have it, or are unaware of how it was designed to be coiled (see vid). not that you have to do it this way.
Single horizontal build is as easy as any other dripper out there (that's what I run on a daily basis, and it chucks better than some dual coils).
Anyway, you'll get as many opinions as there are members of the forum, so just go with the one you fancy... there will be a second and third following it soon enough i bet!!

 leo,that looks Dead Easy,even for me ,ill get the Veritas as well,and just work it single coil for a start,if its as goo as dual coil compared to other drippers.Dont know what that reviewers were on about,they must have been trying a big build.Thanks for your help.

[crunchynut]

Sept 11, 2014 15:08:29 GMT ruffdog said:

crunchynut you go for it. have you got some wire and cotton?

I love dripping now but when I first tried it I couldn't really see the fuss. TIP: It is all down to airflow and wicking.
don't bother about sub ohming or anything just now. a 1.2 ohm twisted micro coil will happily do the job.

ps: that Cloud A Polished Steel rda at 18 quid looks like a copy of the Orieco Storm-A (which is a bit of a take / clone on the Origen RDA) I was given an Orieco by Steve (VapeStorm) and it is a brilliant bit of kit. you can almost get it to vape a little like a protank but way better. imo.

Ruffie.

Thanks for the advice I'll pick some wire up from there, I've not coiled much and they said they will coil the first for me so I'll ask the to do a 1.2 ohm after that I'll look on YouTube for a twisted micro coil you mentioned.
I normally vape 18mg mic but obvouisly not in a dripper so what mg would you surges
Also I'll have a look at the Cloud A Polished Steel RDA too


Sent from my iPod touch using Tapatalk

[Romney]

Sept 11, 2014 17:18:36 GMT robby said:

Really are not hard to build Romney, I have a review up in the review section

I meant the Veritas was apparently hard to build robby,but leo just posted a video and it looks easy doing it single coil.I looked at your review on the Magma,it was good.

[crunchynut]

ruffdog
You said I'd be best going for a 1.2 ohm coil in my magma but out of interest which coil would you build in a Taifun GT rba as I may give that a go too later


Sent from my iPod touch using Tapatalk

[hijack]

Sept 11, 2014 18:34:42 GMT crunchynut said:

I've not coiled much and they said they will coil the first for me
I'll look on YouTube for a twisted micro coil you mentioned.

Your lucky you got a shop with someone who can make a coil, if I go into my B&M they look at me like ive just beamed down from the mother ship.

Ill save you the search for twisted tutorials. Theres is a thread on here that someone posted a load of different types of twist. The bottom video is the basic 2 strand twist, the others more complicated.

Also if your looking for a RBA then the Kayfun Light is a big winner with many on here. Not putting the Taifun down but both my KFL's perform better than my Taifun.

[it0mm0]

Just to add to this post

Im going away this weekend and have just finished packing my vape gear and im taking 2 drippers and a couple of tanks

Both drippers are TOBH V2`s

Ive got 5 different drippers inc plumeveil/mephisto clones etc but my faves by a long long shot are the TOBH

[crunchynut]

Sept 11, 2014 19:55:49 GMT hijack said:

Sept 11, 2014 18:34:42 GMT crunchynut said:

I've not coiled much and they said they will coil the first for me
I'll look on YouTube for a twisted micro coil you mentioned.

Your lucky you got a shop with someone who can make a coil, if I go into my B&M they look at me like ive just beamed down from the mother ship.

Ill save you the search for twisted tutorials. Theres is a thread on here that someone posted a load of different types of twist. The bottom video is the basic 2 strand twist, the others more complicated.

Also if your looking for a RBA then the Kayfun Light is a big winner with many on here. Not putting the Taifun down but both my KFL's perform better than my Taifun.

Yer it is good to have this shop on my door step I'd say they are the best in tameside to sell mods and have the knowledge to go with it. They sell a lot of stuff and different types of juice even got 100% VG in as they are all cloud chasers in there and they are open till 10pm. Called in last night and got the magma but got back really late so will be trying it out later on after work.
The guys down there a top they coiled it for me for free showing me as they did it, ended up getting that the RDA, high VG juice, wire, jap cotton.
Can't wait to get home


Sent from my iPod touch using Tapatalk

[crunchynut]

Sept 11, 2014 19:55:49 GMT hijack said:

Sept 11, 2014 18:34:42 GMT crunchynut said:

I've not coiled much and they said they will coil the first for me
I'll look on YouTube for a twisted micro coil you mentioned.

Ill save you the search for twisted tutorials. Theres is a thread on here that someone posted a load of different types of twist. The bottom video is the basic 2 strand twist, the others more complicated.
.

Cheers for the link, just had a quick look and thought Rip Tripper would be mentioned somewhere
Craaazzzy coils



Sent from my iPod touch using Tapatalk