Evolve DNA 40 clone temp control - first look :)

[robby]

Just found out that they may be changing the box on the Kangxin mod so anyone ordering one in future may get a different box to the gold coloured one

[Greigster]

Feb 3, 2015 14:29:48 GMT car147 said:

Just re coiled a Sub Tank mini on the clone 0.16ohm Ni200 and its rocking!

Great Combo car147, have not used anything better.......well, until I dropped to 0.13ohm ni200

[richo71]

Feb 3, 2015 14:56:35 GMT robby said:

Just found out that they may be changing the box on the Kangxin mod so anyone ordering one in future may get a different box to the gold coloured one

Miine is on its way   from macmagoo can you tell me the best place to get Ni 200 robby as this is my first dna40 and i dont have any of this wire 

[Deleted]

Right I post the graphs and mathematics later...! But;

From taste and warmth of vape I reckon there is a 40f difference between (my) China and the DNA boards....Im using temp only and letting the chips do the watts. Single coil builds so running anywhere between 10-20watts.....not sure if I put an orchid or so on these running at temp alone would work, might blow me head off...

the real deal does have a nicer finish, slightly better machining, notable around the screen cut and with extra chamfer and the buttons are better.

China Flask is running fine and its goes without saying what is the best value for money...

[blakey]

Feb 3, 2015 14:21:46 GMT matie33 said:

today on 3fvape new flask v3 with usb, seems kangxin, but 3fvape dont post picture of box, now its more expensive but you get usb cable and pouch, blue and red version

& black
www.3fvape.com/vv-vw-mod/1660-vapor-flask-dna-40-style-upgraded-version-variable-wattage-mod-black-140w-2x18650-micro-usb-charger-temperature-control.html

[robby]

It is very thin and very springy stuff VapingBad. It`s gonna have to be twisted, either a two wire twist or a three wire twist and I haven`t got the patience at the moment

[Greigster]

Feb 3, 2015 14:59:45 GMT richo71 said:

Feb 3, 2015 14:56:35 GMT robby said:

Just found out that they may be changing the box on the Kangxin mod so anyone ordering one in future may get a different box to the gold coloured one

Miine is on its way   from macmagoo can you tell me the best place to get Ni 200 robby as this is my first dna40 and i dont have any of this wire 

I am not robby but I got mine from Vapemeshcompany and have had no problems

[Deleted]

Feb 3, 2015 14:55:58 GMT VapingBad said:

Feb 3, 2015 14:47:27 GMT @letsavit said:

Was just going pull you up then but noticed your corrected it with your edit....

(I edited that a few mins after I posted it hours age)

The word is it works and you have to half the temp, but by the maths IIRC it would be what I put and it will not be as accurate as nickel.  The wire may effect the taste or be a little or may be easier to coil (I doubt it, but you don't know until someone tries) so I would wait for gunny pig (robby) to report back on how he found it after a few days.

Yea you know im only pulling your leg but I'm am reading and listening....has to be you or Robby to test this, iv only just got settled with NI200.....!  

[richo71]

Feb 3, 2015 15:01:49 GMT Greigster said:

Feb 3, 2015 14:59:45 GMT richo71 said:

Miine is on its way   from macmagoo can you tell me the best place to get Ni 200 robby as this is my first dna40 and i dont have any of this wire 

I am not robby but I got mine from Vapemeshcompany and have had no problems

Cheers Greigster, was looking for 28awg but out of stock must be popular size for ni 200

[robby]

Feb 3, 2015 14:59:45 GMT richo71 said:

Feb 3, 2015 14:56:35 GMT robby said:

Just found out that they may be changing the box on the Kangxin mod so anyone ordering one in future may get a different box to the gold coloured one

Miine is on its way   from macmagoo can you tell me the best place to get Ni 200 robby as this is my first dna40 and i dont have any of this wire 

I got mine on ebay richo71, www.ebay.co.uk/itm/NI200-Wire-99-Nickel-0-2mm-200-Micron-32-AWG-25-Metre-Spool-/221676365188?  It`s .2 - 25M for a fiver plus £1-50 postage

[VapingBad]

Feb 3, 2015 15:01:25 GMT robby said:

It is very thin and very springy stuff VapingBad. It`s gonna have to be twisted, either a two wire twist or a three wire twist and I haven`t got the patience at the moment

I thought it would be, Vape Mesh sent me a free sample of ti once and I had to make a 54 wrap coil just to get as high as 0.5 ohm, it was 0.83 mm IIRC.

[robby]

wowow, mine is .15mm

[Deleted]

I got my Ni200 from Stealth Vape, but picked the wrong one (i got Annealed) but seems to work fine.

[VapingBad]

Feb 3, 2015 15:10:14 GMT robby said:

Feb 3, 2015 14:59:45 GMT richo71 said:

Miine is on its way   from macmagoo can you tell me the best place to get Ni 200 robby as this is my first dna40 and i dont have any of this wire 

I got mine on ebay richo71, www.ebay.co.uk/itm/NI200-Wire-99-Nickel-0-2mm-200-Micron-32-AWG-25-Metre-Spool-/221676365188?  It`s .2 - 25M for a fiver plus £1-50 postage

That is the same Company as Vape mesh Co

[VapingBad]

Feb 3, 2015 15:12:22 GMT robby said:

wowow, mine is .15mm

I have some 0.16 mm ni and found twisted 2 strand was fine with screw terminals, but with through hole (Orchid) I could only get 3 strand twisted to make a reliable contact.  On the video I posted the other day they said that twisting the ni is similar to tempering it.