New Earl Battery

[crazyquilter]

Just got the above battery today, ooooh lovely pink one. .  Trouble is I don't understand even though I was asking about the numbers on the aspire spinner.  Great answers about voltage and wattage, for somebody who understands these, but not particularly for me, since I just used 4.3 and turned it up a bit when I felt the battery was lagging a bit.  Now I have this battery (bought in in the hope of the charge lasting longer) it is giving me volts and watts .  Aye right, so could somebody give me a clue what to set it at, for whatever seems normal.  It goes up to 20 volts so I set it half way at 10, then when you press the button before you have a puff, the watts numbers run up like a cash register.  I don't know if I have to wait till these watts numbers stop (I don't), but what is it doing, and am I supposed to wait till it reaches a certain number or what>   Struth, I thought learning how to use the computer was a major challenge, now this as well.  I only want a nice wee vape with no hassle.  Thankyou.

[sydsut]

It's the same as the Smart-20 both of which are clones of the Istick. It goes up to 20 WATTS not volts. It would appear that you are pressing the wrong button. Top square button fires it and the to triangular buttons increase or decrease watts or volts. if you press the up arrow button for a couple of seconds it raises watts or volts automatically until it reaches the maximum for the resistance of the coils used. or you press it again to stop it. Search on these two Mods, the Istick and Smart-20 as there's a lot of stuff on them on the forum.

[crazyquilter]

Thanks Sydsut, I'll do that. I used to live in St. Leonards East Kilbride, now in Northumberland but relations still there.

[sydsut]

Jan 30, 2015 22:37:08 GMT crazyquilter said:

Thanks Sydsut, I'll do that. I used to live in St. Leonards East Kilbride, now in Northumberland but relations still there.

I live in East Mains, close to the village.

[Perpetua]

Start low and work up crazyquilter . . . the Earl, iStick & Smart-20 run more powerfully than what you've probably been used and you can burn your eliquid quite easily as a result.

Here's a video & written review explaining the iStick functions, which you may find helpful in understanding your Earl.

spinfuel.com/eleaf-istick-review/

[crazyquilter]

Thank you so much P. That was just what I needed. A wee bit too technical, but base line I understand what I am looking at now. Your suggestion of starting low was the key. I started too high I think, but now I have it pretty much sussed. You are a star, thanks again

[lexs1411]

crazyquilter When did you order your Earl istick as I am still waiting on mine