Cloupor mini Ohms reading

[monty]

Please give me a link if this has already been discussed - a search for Cloupor in the thread title turned up nothing so something wrong,

My Cloupor mini is giving the wrong Ohms reading:-
AGT reading 3.4 or 3.3 on other mods and meter but 2.80 on Cloupor mini
IGO reading 1.2 on other mods and meter but 0.96 on Cloupor mini
Similar low readings on two other attys.

[VapingBad]

I don't recall it being mentioned before, but that sounds like the board is faulty, you may get some more use out of it by turning the watts down.

[markm]

If it's reading low, then you would need to turn UP the power to compensate.

[VapingBad]

Apr 18, 2015 14:16:56 GMT markm said:

If it's reading low, then you would need to turn UP the power to compensate.

silly me, got it arsy versy again

[tim]

Apr 18, 2015 13:20:51 GMT monty said:

Please give me a link if this has already been discussed - a search for Cloupor in the thread title turned up nothing so something wrong,

My Cloupor mini is giving the wrong Ohms reading:-
AGT reading 3.4 or 3.3 on other mods and meter but 2.80 on Cloupor mini
IGO reading 1.2 on other mods and meter but 0.96 on Cloupor mini
Similar low readings on two other attys.

I had this problem recently. Although all mods read differently, I had massive differences on various mods with a dripper. Turned out I needed to re-tighten the screws on the coil. Problem fixed.

I hope yours is the same issue.

[phtumshk]

Could be the adjust pin needs removing for a clean up?.

[VapingBad]

Apr 19, 2015 0:57:40 GMT phtumshk said:

Could be the adjust pin needs removing for a clean up?.

If it was reading too high, but monty's one is reading too low.

[monty]

Yes reading low an all attys. Charging my 25Rs so I can compare how it vapes at the same Watts to other mods.

[smarties]

Took the atty off the black one and put it on the silver one, black one reads 0.2 ohms more than the silver one, I guess the Clouper boards are not the best quality but still good for the price.
Forgot to tag monty 
Also I've had a couple of isticks apart recently and compared the boards to the cloupor mini, the istick seems a better quality board in my opinion but having said that I'm no expert.

[monty]

Rough and ready comparison test - looks like it's firing at about 8 Watts when set at 10 Watts so I'll probably get a maximum of 24 or 25 Watts instead of 30. Not bad enough to return it. Can't expect the moon for twenty quid. I bought it for the Goblin, Lemo 2 or Mephisto clone so I should find its partner. High power is still new territory for me and I have a more power if I need it.