Goblin woes.

[Greigster]

Dental floss seems to have worked. Used the Goblin all last evening and left on the mod overnight...dry as a bone.

It would leak enough to run down the side of the mod before.

[*-SARIN-*]

May 19, 2015 7:24:48 GMT decoy said:

May 18, 2015 23:52:48 GMT letsavit said:

this tank certainly has the right name it gobbles juice is no time...... Good news is not a drop out of my fill hole for my second run of 3 tanks I went though today....bad news is i wicked this time wrong, too much I think...20 watts was tasting hot and a little burnt..... Less is more when wicking me thinks...? Or pancake duck arse wick next time?

mine leaked outa the screw hole a few times but i maned up and got a well fitting screwdriver and tightened it up like he man and undid it a few times and no more leaks yay
i did find a long drawn out youtube vid for building and wicking but the main thing i took from it is less cotton,trim said cotton to same size as the deck and not putting any down the juice channels(a little do go down when you put the chimney on) then tease said cotton away from the coils and easing it down ever so slightly and your good for up to 45 watts at .6 ohms(not a pleasant vape to me but lush up to 30 watts)
ill try n find the vid when i get a chance

I posted it on page #3 post #36, from about 28 minutes

[decoy]

May 19, 2015 12:32:45 GMT *-SARIN-* said:

May 19, 2015 7:24:48 GMT decoy said:

mine leaked outa the screw hole a few times but i maned up and got a well fitting screwdriver and tightened it up like he man and undid it a few times and no more leaks yay
i did find a long drawn out youtube vid for building and wicking but the main thing i took from it is less cotton,trim said cotton to same size as the deck and not putting any down the juice channels(a little do go down when you put the chimney on) then tease said cotton away from the coils and easing it down ever so slightly and your good for up to 45 watts at .6 ohms(not a pleasant vape to me but lush up to 30 watts)
ill try n find the vid when i get a chance

I posted it on page #3 post #36, from about 28 minutes

opps yep thats the one
that way works v well and if you get dry hits at higher power use less cotton

[chykensa]

Update: well, I bit the bullet as promised and stuck a couple of coils in my Goblin last night, came to .6ohm. Great flavour, but can anyone suggest a better way to fill the little monster? Took me 20 minutes to get the juice into the tank, and that was with quite a bit of sucking through the chimney to encourage it out of the fill hole and into the tank itself!! Can't be doing with that every time

[Pepperty]

I found that a squeezy bottle with a plastic nib that filled and plugged fill hole works best Andy, A slow gentle squeeze with tank angled, then let go of bottle and allow air to bubble back into bottle and repeat, slowly and about 6x until almost all air is out of tank and replaced with juice.

A syringe doesnt work for me as the air cant flow back and instead it shoots through deck and floods out of drip tip. The best bottles I've found are those long long slim ones with a fat nib from fasttech are best

[phatfil]

May 21, 2015 7:07:05 GMT chykensa said:

Update: well, I bit the bullet as promised and stuck a couple of coils in my Goblin last night, came to .6ohm. Great flavour, but can anyone suggest a better way to fill the little monster? Took me 20 minutes to get the juice into the tank, and that was with quite a bit of sucking through the chimney to encourage it out of the fill hole and into the tank itself!! Can't be doing with that every time

wrap a bit of ptfe tape round the bottom of the tank and where it joins/seals against the atty bottom, unscrew the top, ensure the chimney is installed into the atty bottom assembly and not the lid/top, and fill upto about a mm or so under the tank lip and screw the top back on, the wrap of ptfe will keep the tank in place and maintain a good enough seal for the filling duration.

it wont fill 100% full but close to 90%..
allaboute-cigarettes.proboards.com/threads/recent/54459

[*-SARIN-*]

May 21, 2015 7:07:05 GMT chykensa said:

Update: well, I bit the bullet as promised and stuck a couple of coils in my Goblin last night, came to .6ohm. Great flavour, but can anyone suggest a better way to fill the little monster? Took me 20 minutes to get the juice into the tank, and that was with quite a bit of sucking through the chimney to encourage it out of the fill hole and into the tank itself!! Can't be doing with that every time

Stick it right in the hole good and hard, pump a few times, remove, repeat

[chykensa]

Well, I think I've sorted the filling of this thirsty little beast by using a syringe. Blimey it drinks juice though, got through a whole tank last evening and wasn't exactly caning it either!!
Buoyed by my success with dual coils I will pop a couple in one of my drippers over the weekend and see what happens

[mike weaver93]

May 23, 2015 10:22:22 GMT chykensa said:

Well, I think I've sorted the filling of this thirsty little beast by using a syringe. Blimey it drinks juice though, got through a whole tank last evening and wasn't exactly caning it either!!
Buoyed by my success with dual coils I will pop a couple in one of my drippers over the weekend and see what happens

maybe... this RTA lives up to its name .. Goblin (gobbling) juice 

[phatfil]

orings to ?fix? the problem have arrived, fewer than expected only 100 x

i will distribute at 10p each so £1 paypal fnf will cover 1st class post an envelope and 2 x orings,

allaboute-cigarettes.proboards.com/threads/recent/54779

cheers

fwiw if all 100 sell i stand to make about a fiver in total profit