RBA Coil Head for SUBTANK Mini

[decoy]

slot the air intake on the bottom for more open draw
and if you got the old type a nedal file in a drill sorts out the juice channels


i use max vg and the mods made the dry hits stop

[buggritt]

I added one of these new "improved" decks to a myepack order. Fortunately, I also tagged on the older version. Tip - don't take the screw holding it together out all the way. It's the tidgiest little piece of s**t on the planet. Not only that, it was screwed in by a man on a mission to make me blow a gasket. Am I impressed? Not really. It's easier to wick marginally. And that's all. It's an OCC head that's quicker to rebuild - if you leave the screw part in.

[drunkenbum]

Jul 8, 2015 13:59:44 GMT buggritt said:

I added one of these new "improved" decks to a myepack order. Fortunately, I also tagged on the older version. Tip - don't take the screw holding it together out all the way. It's the tidgiest little piece of s**t on the planet. Not only that, it was screwed in by a man on a mission to make me blow a gasket. Am I impressed? Not really. It's easier to wick marginally. And that's all. It's an OCC head that's quicker to rebuild - if you leave the screw part in.

I had trouble undoing the little screw. So much so it ripped the top off one of my little blue screwdrivers. Half an hour of picking metal out of the screw and I finally got it budged. Works a treat though. Much better than the old rba

[JayJ]

I'm hugely disappointed with the quality of mine, I can't do a build on the two I bough to comment on their use. One of them I can't trap .25 ni200 under the screws, I've tried wrapping around the screws but still no joy, the wire slides around as the screws don't seem to trap it. On the other, one of the screws won't undo, it rotates, just won't unscrew.

Really disappointed as I was looking forward to playing with these with temp wire ????

Jay

[drunkenbum]

That sucks JayJ apart from the little screw that holds the chamber on being almost welded in I've had no problems

[decoy]

Jul 16, 2015 17:09:36 GMT JayJ said:

I'm hugely disappointed with the quality of mine, I can't do a build on the two I bough to comment on their use. One of them I can't trap .25 ni200 under the screws, I've tried wrapping around the screws but still no joy, the wire slides around as the screws don't seem to trap it. On the other, one of the screws won't undo, it rotates, just won't unscrew.

Really disappointed as I was looking forward to playing with these with temp wire ????

Jay

when using thinner ni200 i wrap it round the screw once and that seems to sort it

[JayJ]

I'll give it another shot on the one that the screws work in when I've got my readers handy, I'm 43 I have readers lol.

Jay

[JayJ]

decoy what did you use to slot the air intake on the subtank mini ?

Jay

[decoy]

Sept 29, 2015 0:00:19 GMT JayJ said:

decoy what did you use to slot the air intake on the subtank mini ?

Jay

small hack saw then a nedal file
its worth doing as it opens up the airflow to near nuff same as occ head

[SteveF]

I've already drilled out the juice hole to 4mm, opening up the airflow seems like it could be my next step to making the V2 rba perform, found that the 'Scottish roll' makes a superb pancake type wick.

There is a 4 turn 0.2 ohm kanthal twist ( 0.5mm, 0.30, 0.25, 0.20) in this ball of fluff

[Deleted]

You vaping a dandelion there SteveF ?

[JayJ]

Sept 29, 2015 0:06:05 GMT decoy said:

Sept 29, 2015 0:00:19 GMT JayJ said:

decoy what did you use to slot the air intake on the subtank mini ?

Jay

small hack saw then a nedal file
its worth doing as it opens up the airflow to near nuff same as occ head

Thanks for the tip, I've done this mod today and I have to say airflow is just great now. TC isn't kicking in as early and my 60% pg 40%vg mix is kicking out clouds of vapour. Might knock a heavy vg mix up just to wind the gf up. stevef it's made a real difference fir the sake of 15 minutes with hacksaw and a needle file.

Jay

[SteveF]

Sept 29, 2015 19:52:12 GMT kreed said:

You vaping a dandelion there SteveF ?

Now theres a thought for next summer