Kanger subtank mini

[jevans]

Just bought myself one of these and am well "chuffed".

Very easy to re-coil and produces plenty of taste and vapour.

Will need to blow down to the floor when I use it in the pub.

They supply 1 RBA among many other bits and pieces, but would like another for quick coil change in the field, anybody any ideas where I can get one?

Jim

[Jerri]

Jul 22, 2015 14:56:01 GMT jevans said:

Just bought myself one of these and am well "chuffed".

Very easy to re-coil and produces plenty of taste and vapour.

Will need to blow down to the floor when I use it in the pub.

They supply 1 RBA among many other bits and pieces, but would like another for quick coil change in the field, anybody any ideas where I can get one?

Jim

Myepack have both the v1 and v2 rba bases in.

Or if you're not in a rush fasttech have a pack of 5 for about £5 I think.

[drunkenbum]

I bought the new style RBA plus from fasttech jevans. Huge improvement over the one that came in my subtank mini

[jevans]

Many thanks Jerri and drunkenbum I'm off to take a gander at fasttech!

Jim

I've just noticed, mine came with the RBA plus.

[Greg]

m.fasttech.com/p/2551300

Only the singles in stock at the moment jevans £1.76 each.

[buggritt]

Just to be mary mary - I prefer the v1 rba. The v2 is just an occ coil that's easier to rewick.

[Greg]

Jul 22, 2015 15:45:53 GMT buggritt said:

Just to be mary mary - I prefer the v1 rba. The v2 is just an occ coil that's easier to rewick.

It's a fair bit bigger though and for me at least is far superior to the V1 and the RBA, each to their own though. For the cost of them might as well try them all and see which suits 

[digicig]

I've got on of FT's 'Styled' mini rba heads coming

[flavourtank]

I haven't tried the v2 rba yet, might venture to getting a v2

[digicig]

Definite improvement - the v1 'locked on' too many times for me Ended up snapping the deck, (only press fitted) hence ordering the new one

I build the V2 pretty much the same as the OCC's -
1) i build the coil, pop the chimney on, pass a small screwdriver through the wick holes and coil and partially screw it down.
2) remove screwdriver and thread the cotton so that it passes through the wick holes - similar to the OCC's
3) unscrew the chimney and push it all the way down and screw down properly
Soak and vape

[jevans]

Jul 22, 2015 15:43:51 GMT Greg said:

m.fasttech.com/p/255130

Only the singles in stock at the moment jevans £1.76 each.

Link not working, but thanks for the reply.

I've got 2x RBA plus on order.

Jim

[Greg]

Jul 22, 2015 17:34:56 GMT jevans said:

Jul 22, 2015 15:43:51 GMT Greg said:

m.fasttech.com/p/255130

Only the singles in stock at the moment jevans £1.76 each.

Link not working, but thanks for the reply.

I've got 2x RBA plus on order.

Jim

Oops, I deleted the last zero by mistake, it works now 

[Greg]

Jul 22, 2015 17:12:09 GMT digicig said:

Definite improvement - the v1 'locked on' too many times for me Ended up snapping the deck, (only press fitted) hence ordering the new one

I build the V2 pretty much the same as the OCC's -
1) i build the coil, pop the chimney on, pass a small screwdriver through the wick holes and coil and partially screw it down.
2) remove screwdriver and thread the cotton so that it passes through the wick holes - similar to the OCC's
3) unscrew the chimney and push it all the way down and screw down properly
Soak and vape

I dont pull the cotton through I just lay it up to the holes on the inside 

[smokin100516]

I just make sure the tips of the cotton are covering the holes and it seems to work fine and dandy

[jevans]

Jul 22, 2015 17:50:52 GMT Greg said:

Oops, I deleted the last zero by mistake, it works now 

Ta!

Jim