Smok X Cube II TC 160W - £35.98 at GearBest - Lightning sale

[Deleted]

Cheers for help anyway m8

[Deleted]

Right gone through the whole set up process for the third time, including erasing and reinstalling the firmware and its made absolutely no difference, also using a 0.12ohm ni200 coil checked on my meter, and 3 other TC mods and still nothing other than coil low??, then it blew the coil, tried another, goosed that as well. Normal mode it works fine using the Smok TFV4, then tried the RBA deck on the TFV4 with a Ni200 build, and the same issue resistance too low. guess it must be some component fault related to the TC side of things, but only guessing now.

Pm'd isabel22 and Gear Best raising a ticket

[Deleted]

What is the nickel coefficient set to?

[Deleted]

Was at 580 when I initially fired it up, then adjusted it to 640

[Deleted]

0.00640?

[Deleted]

Aug 26, 2015 21:26:09 GMT kreed said:

0.00640?

Yup, didn't bother with all the 0.00 bit just saving typing

[Deleted]

Does sound like you got a dud then mate........sorry to hear that

[Deleted]

No probs, thanks for the help, had to happen at some point, strange thing is how its still operating in normal mode.

[sydsut]

Is it set for Single Coil Or Dual Coil car147 ? and min, soft, norm, hard or max Mode ?

[sydsut]

Well I finally managed to get my TI mode working on the X Cube II after a bit of bother with firmware upgrades etc. I've got a single coil TI build in my Derringer and very nice it is too. But is it an improvement on NI200, I don't really think so apart from TI being much easier too coil than NI200 and as it's more stiff (closer too Kanthal in this respect) it's much nicer too wick too. The mod is set at 410f and coefficient at .00320 and the initial ohms as high as it will go. Great flavour and plenty of vapour with LiQuids Blackcurrant & Liquorice. I will be trying a lot of different settings and setups over the next few days. Thanks for all the help guys. Happy wee me.

[Deleted]

Hi m8

I have tried it in all modes and definitely in singe coil

Cheers

[robby]

So no noticeable improvement in flavour with the titanium wire sydsut?

[sydsut]

Aug 26, 2015 23:12:43 GMT robby said:

So no noticeable improvement in flavour with the titanium wire sydsut?

Not yet robby though I will be trying different settings, setups, tanks and juices etc. at the moment a bit of a hung jury. Still it's early days yet. Certainly the TI wire is much easier to work with than NI200 and this fact alone endears it to me  . I think dual coils on the likes of an Orchid will be possible now. I had to admit defeat with NI200 on these. I shall try an Orchid build later today.

[Deleted]

Working in temp mode now, details in vendor reviews thread, still some strange readings etc

Linky

[sydsut]

Orchid dual coil build a great success !!!