Best flavour change setup

[alexthebear]

Aug 30, 2015 12:35:39 GMT mike weaver93 said:

Aug 30, 2015 11:07:37 GMT alexthebear said:

Some excellent information thanks, I didn't realise that a dripper would involve me having to rebuild my attys so I think I may hold off for a minute, quite simply as I just do not have the time to be fiddling around with rebuilding. Having seen how cheap I can get copies of the Nautilus, Triton, Atlantis and Kanger stuff on fasttech I think seperate tanks I can leave filled is the way to go for now

alexthebear

Regarding drippers..

You dont need to rebuild, if you buy premade coils from Fasttech...

Drippers such as the Velocity & Magma are easy to build with these premade coils...

and the flavour is night & day compared to other devices -IMO...

My brother in law is called Mike Weaver! You haven't just moved here from new Zealand have you? ????

I'm going to pop on over the fasttech now and pick me up one of each ???? thanks

Edit-just going for the magma as it gets great reviews. Which premade coils do I need? Ta

[mike weaver93]

Aug 31, 2015 8:24:38 GMT alexthebear said:

Aug 30, 2015 12:35:39 GMT mike weaver93 said:

alexthebear

Regarding drippers..

You dont need to rebuild, if you buy premade coils from Fasttech...

Drippers such as the Velocity & Magma are easy to build with these premade coils...

and the flavour is night & day compared to other devices -IMO...

My brother in law is called Mike Weaver! You haven't just moved here from new Zealand have you? ????

I'm going to pop on over the fasttech now and pick me up one of each ???? thanks

alexthebear

no mate I'm not...

IF you're using IStick 30w, it can only fire coils as low as 0.4 or 0.5, IF someone can confirm for sure..

For a single coil, I'd recommend these...
www.fasttech.com/products/3033/10008276/2126701

These are ideal for dual coil, as they fire at 1.25, so dual coils should come out at 0.6  www.fasttech.com/products/3033/10008276/1995001

Velocity is mainly a dual coil... www.fasttech.com/products/0/10014538/2482500-velocity-styled-rda-rebuildable-dripping-atomizer
 
or Magma.. great in single coil mode.. www.fasttech.com/products/0/10008103/1718100-magma-styled-rebuildable-dripping-atomizer

If you need any help, ask away...

[alexthebear]

Aug 31, 2015 8:54:11 GMT mike weaver93 said:

Aug 31, 2015 8:24:38 GMT alexthebear said:

My brother in law is called Mike Weaver! You haven't just moved here from new Zealand have you? ????

I'm going to pop on over the fasttech now and pick me up one of each ???? thanks

alexthebear

no mate I'm not...

IF you're using IStick 30w, it can only fire coils as low as 0.4 or 0.5, IF someone can confirm for sure..

For a single coil, I'd recommend these...
www.fasttech.com/products/3033/10008276/2126701

These are ideal for dual coil, as they fire at 1.25, so dual coils should come out at 0.6  www.fasttech.com/products/3033/10008276/1995001

If you need any help, ask away...

There should have been a laughing smiley after that question Mike, I can only presume that my android ones aren't compatible.

When I buy the magma I will be getting a larger mod as well. There's sooooo many though!

[alexthebear]

Cheers for the links, they are ideal

[MrDJ]

noted and thanks for the tip.

will only use in the istick40 on TC mode from now on.

think i will email Freemax as there not much info out there and i bet theres a lot of freemax owners out there who dont own a TC mod.

really appreciate the advice Tim, thank you.


edit

looking at this review hes using the DVC coils at full wattage on the istick50

[tim]

Aug 31, 2015 10:50:19 GMT MrDJ said:

noted and thanks for the tip.

will only use in the istick40 on TC mode from now on.

think i will email Freemax as there not much info out there and i bet theres a lot of freemax owners out there who dont own a TC mod.

really appreciate the advice Tim, thank you.


edit

looking at this review hes using the DVC coils at full wattage on the istick50

I think the Freemax coils are Kanthal, so no problem. Looking at reviews, nobody mentions TC, but check what it says on the coil. At those ohms quoted, it sounds like Kanthal, ie above 0.2, but not conclusive. Just make sure and vape safe.

[alexthebear]

Get Off My Cloud could you point me in the direction of a decent wire and wick for the velocity please. Pushing the 'pay now' button on FT as soon as my customers cheque has cleared so want all the other bits in place ready for me to have a play when it turns up

After watching a few vids and reading up on the tutorials on here, building coils doesn't look to difficult and the dual posts on the velocity make it look so simple as you said, going to give it a bash I'm still jumping from flavour to flavour at home so it's the way to go.

I'm currently vaping on a triton and nauti mini between 0.4 and 1.8ohm and I'm 50/50 for being a cloud and flavour chaser if that makes any difference on the choice.

Thanks

[Get Off My Cloud]

Sept 8, 2015 23:50:12 GMT alexthebear said:

Get Off My Cloud could you point me in the direction of a decent wire and wick for the velocity please. Pushing the 'pay now' button on FT as soon as my customers cheque has cleared so want all the other bits in place ready for me to have a play when it turns up

After watching a few vids and reading up on the tutorials on here, building coils doesn't look to difficult and the dual posts on the velocity make it look so simple as you said, going to give it a bash I'm still jumping from flavour to flavour at home so it's the way to go.

I'm currently vaping on a triton and nauti mini between 0.4 and 1.8ohm and I'm 50/50 for being a cloud and flavour chaser if that makes any difference on the choice.

Thanks

You could get some ready made coils on FT, 50 coils for £2.44.
www.fasttech.com/products/0/10015640/2970600-kanthal-a1-pre-coiled-wires-for-rebuildable
Two of those in the atty should give you a final resistance of around 0.5ohms.

If you want spools of wire it's better to buy from the UK.
Kanthal A1
www.stealthvape.co.uk/wire/KANTHAL-REELS-SPOOLS

0.4mm/26 gauge should suit, 8 wraps on each coil around a 2.5mm rod should give you an end resistance of around 0.5ohms.

If you order from there you can add free wire or free cotton to your basket too, you can't select which gauge wire they send for free.
www.stealthvape.co.uk/wire/free-wire
www.stealthvape.co.uk/wick/free-muji-cotton

[alexthebear]

Thanks Get Off My Cloud