Another mouth to lung tank needed...again

[chicken]

Sept 7, 2015 15:45:08 GMT Mrsmac said:

thank you silvasurfa, I did look there but the glass section is out of stock

chicken, i may just try that with the kf4 clone as other than that, it is destined for the wall, I cant be bothered with replacing oring section 1,6,8 blah blah lol

On a plus note, I ordered a kaytank which uses the sov method of securing the glass to the kayfun. I had it on order for nearly 4 weeks and it has just this moment shipped! will see how that works as well as at least one suggestion from here

I don't think you can beat a good KF V4 if you are having problems with it you are more than welcome to pop it in the post and i'll sort it out and send it back if that helps 

Don't tell anyone but I have 9 authentic KF V4's now 

[arron]

just throwing my 2 pence in....the uwell crown tank is my favourite so far, on par flavour wise to the subtank but much better airflow! my triton will be hitting the classies soon and swapped for another uwell.

no rba base but so far my first coil has lasted over a week with no sign of giving up yet, the 0.3ohm head can easily go up to 60w although my preferred range is 40-45w. not the prettiest tank but the top fill is far better than the triton and it is cheaper

[Mrsmac]

thank you chicken, Im going to try your method of undoing the tank and see if that works, it has happened before and I notice that the bottom base wiggles quite a lot. If I dont sort it then I'll drop you a pm and if you have time you could see if there is anything you can do. If not, I give you my blessing to allocate a good spot in the wall for it!

[decoy]

www.fasttech.com/products/3390301

[kevbev]

Mrsmac.... taifun GT2 cotton wick.

If i have copied this correctly !!   here is a link showing how to do the "S" wick build....

www.smokerstore.de/WebRoot/Store11/Shops/61925514/MediaGallery/TGT2_Manual_HiRes_Final_E.pdf

Page 16, version C

[Deleted]

Those 2ohm ISub coils might , I say might be a little off

allaboute-cigarettes.proboards.com/thread/56890/sub-coils?page=1&scrollTo=998408

[Mrsmac]

Sept 7, 2015 16:55:14 GMT kevbev said:

Mrsmac.... taifun GT2 cotton wick.

If i have copied this correctly !!   here is a link showing how to do the "S" wick build....

www.smokerstore.de/WebRoot/Store11/Shops/61925514/MediaGallery/TGT2_Manual_HiRes_Final_E.pdf

Page 16, version C

Ahhh thank you, will try that the next time around it looks simple as that is how I usually wick my kayfuns

[peter12]

Uwell is the tank top of my wish list right now seen some great reviews of it. The other tank I would really like is the goliath.

The lemo drop suprises me. That you think it gives to much air. Even with air screw wide open I find it very restrictive. With it closed its like trying to drink a fresh mcdonalds milkshake. Would have thought it would be perfect for you. Downside to lemo drop is it cannot be re wicked or coiled with juice still in it major let down

[sonicflowjoe]

Sept 7, 2015 9:20:51 GMT Perpetua said:

I simply love the iSub-G Mrsmac . . . . the coils last for ages, mine is still going strong after a full on month's worth of use.

They're reasonable to buy and although not advertised as rebuildable, sonicflowjoe has had success rebuilding them.

Though if mine last as long as Andy's, it's a small expenditure every few months to use a stock coil:

allaboute-cigarettes.proboards.com/thread/55983/news-flash-isub-head-change?page=1

I been having a play this evening. I've had a stock coil in my isub g for a while (I acquired a few from @19steve57).

I ran a few tanks through and It was starting to taste a bit off so thought i'd whip it out for a rebuild and take a few pics as I went. Got the beginnings of a guide anyway. The pics I have pretty much tell the story without any words

[Mrsmac]

I shall look out with interest sonicflowjoe

I am now torn between a few tanks!

If the kf4 worked all would be hunky dorey, that is going out for repair.

I have something called the kaytank in the process of being delivered so will know if that is any good in about a weeks time.

About the Lemo drop, the airflow control practically spins. I have managed to stuff something down there but it doesn't hold and when I do use it, it gurgles and is not a smooth mouth to lung. I currently have a 3mm coil in there.

I'm torn between the isub mentioned, the expromizer, the ego one and if I'm honest May be even the nautilus. Will have another bash at the taifun. I know the nautilus isn't really a rebuildable and probably not a cost effective solution for me.

You guys are great and thanks for sorteing me that there are still some options I can consider. Hopefully in the next few weeks I'll have this sorted:)

[Deleted]

hope this help . I own a kayfun v4 clone from Tobeco ,i consider a bad clone ... liking like crazy.....but i find a way to make this clone to work (for me) ...: this tank have 4 juice small holes , in 2 of them i push some cotton ,this way only 2 of them will work .My coils r made on a 2.5 mm screwdriver ,i use Muji cotton (a bit longer tale ,looks like ''J'' this way i will not block juice channels and also i can pres down a bit if my cotton suck too much juice)...also max wattage i use is between 15 to 20 watt on kayfun4 with 0.6 ---0.7 Ohm coils.

Uwell Crown tank with 0.5 Ohm stock coils ----40w to 50w and no complaints at all ,no dry hits no licking and i'm still on first coil after 2 weeks of using every day my own home made VC juice.

[Deleted]

Sept 7, 2015 9:20:51 GMT Perpetua said:

I simply love the iSub-G Mrsmac . . . . the coils last for ages, mine is still going strong after a full on month's worth of use.

They're reasonable to buy and although not advertised as rebuildable, sonicflowjoe has had success rebuilding them.

Though if mine last as long as Andy's, it's a small expenditure every few months to use a stock coil:

allaboute-cigarettes.proboards.com/thread/55983/news-flash-isub-head-change?page=1

Hmmm .....if i will spend more money on 1 more tank i will start to blame you guys for posting good things about iSub-G   .....i'm still thinking ....to be or not to be  on my basket   .....

[Perpetua]

Sept 8, 2015 1:25:25 GMT @chris2005 said:

Sept 7, 2015 9:20:51 GMT Perpetua said:

I simply love the iSub-G Mrsmac . . . . the coils last for ages, mine is still going strong after a full on month's worth of use.

They're reasonable to buy and although not advertised as rebuildable, sonicflowjoe has had success rebuilding them.

Though if mine last as long as Andy's, it's a small expenditure every few months to use a stock coil:

allaboute-cigarettes.proboards.com/thread/55983/news-flash-isub-head-change?page=1

Hmmm .....if i will spend more money on 1 more tank i will start to blame you guys for posting good things about iSub-G   .....i'm still thinking ....to be or not to be  on my basket   .....

Two little words @chris2005 . . . . . do it.

[lush]

Sept 7, 2015 15:58:41 GMT arron said:

just throwing my 2 pence in....the uwell crown tank is my favourite so far, on par flavour wise to the subtank but much better airflow! my triton will be hitting the classies soon and swapped for another uwell.

no rba base but so far my first coil has lasted over a week with no sign of giving up yet, the 0.3ohm head can easily go up to 60w although my preferred range is 40-45w. not the prettiest tank but the top fill is far better than the triton and it is cheaper

Cracking tank with ss coils,ni200 and at the moment using a rba base running at 0.90ohms 15watt i find i cant take it much higher wattage still playing, but at only 15 watt lovely vape!

[lush]

Cambridge vaping for the crown rba base