rebuildable and useable for older eyes

[firewall]

Evening All,

As title states after a suitable tank that is is easy to live with and easy to coil, is there such a thing? Do not wish to have to use a magnifying glass just to install a coil nor do I want a special haircut requirement to install cotton wool. After something that just works and does not drink more fuel than me. Is this possible ?

Would like a glass tank, good flavour and easy to coil and wick tank, not to much too ask or is it? 
Would welcome any suggestions especially china but not GB if possible. 

 

[Greg]

Subtank mini

[VapingBad]

Steam Crave Aromamizer with 2 post (AKA velocity) deck is easy to coil (though it is dual coil), but exceptionally easy to re-wick. More importantly it is a great tank for flavour IMO. Link to FT, use code MAP for lot off.

E:  rereading the op "special haircut requirement to install cotton wool" this is exactly what I mean by "exceptionally easy to re-wick" just chop at the right length with horizontal coils.   And fitting coils is super easy.
The only people rewicking at the last LSE vape meet were me and blakey and both with an Aromamizer, it is just so easy.

[violetblade]

Authentic Subtank mini at liberty flights until tomorrow £18.22 + an extra 10% off with LF10 at checkout I love mine and I manage to get it working just fine with a dodgy hand the rba base is single coil so not much faffing about www.liberty-flights.co.uk/product.asp?id=244

[Pepperty]

Must admit that I agree on the mini subtank being my easiest to coil. I love how you don't have to wrap coil legs around posts and try to tighten screw over them, you just lay it along a channel to diode and screw bites down on it.

It's just so easy! I even cheat and buy bags of ready made spaced 0.5 ohm coils from fastech.

[Deleted]

Lemo 2
Easy to coil, easy to fill and great airflow.

[Perpetua]

Dec 19, 2015 23:34:22 GMT Pepperty said:

It's just so easy! I even cheat and buy bags of ready made spaced 0.5 ohm coils from fastech.

And why not!

I'm a huge fan of FT's ready coils also . . . . have you a linky for the ones you use please Pep? The ones I've been getting are close wound which isn't a biggie to pull them out a little, but I'm liking the sound of ready spaced!

[Get Off My Cloud]

For single coil Kanger Subtank Mini is still the easiest to build on you don't even need to wrap the wire under screw heads or anything, just drop the coil on and tighten the screws down, easy to wick.

For dual coil OBS Crius is easy to wick, you have a little wall type thing you just tuck the wick in behind which holds it in place so no haircuts needed.

[gm111]

Not got myself an aromariser yet but from what I've had the crius is easy to wick and the top fill is a dream.

[Pepperty]

Perpetua I think.... I bought these ... I still have to give them a wee tug to widen a tiny bit but they are 'loosely coiled'

[Perpetua]

Thanks Pepperty . . . . I've popped a couple of packs in my cart, along with these to try:

www.fasttech.com/products/2133106

So reasonable!

[Get Off My Cloud]

Perpetua Pepperty I use these LTQ Vaper ones when in a lazy mood.
www.fasttech.com/products/0/10016556/3351601-ltq-vaper-kanthal-a1-pre-coiled-resistance-wire
The legs even have a bend in them so the coil already sits level when you put it through the post holes.

[firewall]

Thank you all for your help and suggestions. I need to get more kanthal as well as some of those made up coils for when I can't be eh bothered.

I have a subtank so will give that another go.

[firewall]

Dec 20, 2015 11:39:41 GMT Get Off My Cloud said:

Perpetua Pepperty I use these LTQ Vaper ones when in a lazy mood.
www.fasttech.com/products/0/10016556/3351601-ltq-vaper-kanthal-a1-pre-coiled-resistance-wire
The legs even have a bend in them so the coil already sits level when you put it through the post holes.



Get Off My Cloud Do you know what the id is on these or the other ones?

[Get Off My Cloud]

Dec 20, 2015 12:55:03 GMT firewall said:

Dec 20, 2015 11:39:41 GMT Get Off My Cloud said:

Perpetua Pepperty I use these LTQ Vaper ones when in a lazy mood.
www.fasttech.com/products/0/10016556/3351601-ltq-vaper-kanthal-a1-pre-coiled-resistance-wire
The legs even have a bend in them so the coil already sits level when you put it through the post holes.



Get Off My Cloud Do you know what the id is on these or the other ones?

Those are 3mm ID not sure about the others