RTA: Kayfun Mini V3 (SXK Clone)

[Deleted]

Damn if this little MTL tank isn't amazing. Only £15 on FT at the moment too.

I can't believe that the genuine tank can be any better than this clone, but if it is then it must be epic. I will buy a genuine one soon as I believe in supporting innovative design and future research whenever possible, but for those who simply can't afford too, then I recommend this outstanding clone at £15.00.

Machined perfectly, it's probably the nicest looking little tank I've seen to date. Easy to build, forgiving on bad wicking, and vapes like a true champ with that nifty juice control. The flavour doesn't quite match up to the high standards of the Ubertoot UTA2, but nearly.

I initially vowed I wouldn't buy this latest Kayfun due to the internal air-control, but you know what, I forgive them for this as once you have it set you don't need to touch it again anyway, unlike what I found with previous Kayfuns where I was always tinkering to get the air-flow right.

The only downside I have found is the tiny 2ml tank size, but this is the first tank I've used where the top-fill actually works without terrible leaking issues afterwards. Just close the juice control fully - unscrew the top cap, fill, replace cap, open juice control and off you go again. Simple and not a hint of gurgling or an after-leak through the air-holes.

This is the perfect "at work" MTL tank IMO. Close the juice-flow, pop it in your pocket or bag with no worries of leaks. Classy, discreet, minimal vapor but such a satisfying flavoursome vape!

After many months of mostly disappointment when buying the latest hyped tanks, over the past few weeks I've discovered the Ubertoot UTA2 and now this stylish little pocket rocket. Happy days indeed!

Just sharing in case anyone is on the fence with buying one of these. Don't miss out on this RTA.

[tsoko]

Apr 14, 2016 16:38:47 GMT @hondo said:

Damn if this little MTL tank isn't amazing. Only £15 on FT at the moment too.

I can't believe that the genuine tank can be any better than this clone, but if it is then it must be epic. I will buy a genuine one soon as I believe in supporting innovative design and future research whenever possible, but for those who simply can't afford too, then I recommend this outstanding clone at £15.00.

Machined perfectly, it's probably the nicest looking little tank I've seen to date. Easy to build, forgiving on bad wicking, and vapes like a true champ with that nifty juice control. The flavour doesn't quite match up to the high standards of the Ubertoot UTA2, but nearly.

I initially vowed I wouldn't buy this latest Kayfun due to the internal air-control, but you know what, I forgive them for this as once you have it set you don't need to touch it again anyway, unlike what I found with previous Kayfuns where I was always tinkering to get the air-flow right.

The only downside I have found is the tiny 2ml tank size, but this is the first tank I've used where the top-fill actually works without terrible leaking issues afterwards. Just close the juice control fully - unscrew the top cap, fill, replace cap, open juice control and off you go again. Simple and not a hint of gurgling or an after-leak through the air-holes.

This is the perfect "at work" MTL tank IMO. Close the juice-flow, pop it in your pocket or bag with no worries of leaks. Classy, discreet, minimal vapor but such a satisfying flavoursome vape!

After many months of mostly disappointment when buying the latest hyped tanks, over the past few weeks I've discovered the Ubertoot UTA2 and now this stylish little pocket rocket. Happy days indeed!

Just sharing in case anyone is on the fence with buying one of these. Don't miss out on this RTA.

Do you have a link? I cant find it on FT

[Deleted]

Apologies tsoko, here you go.

www.fasttech.com/products/0/10006473/4424400-sxk-kayfun-mini-v3-styled-rta-rebuildable-tank

[tsoko]

Apr 14, 2016 16:51:57 GMT @hondo said:

Apologies tsoko , here you go.

www.fasttech.com/products/0/10006473/4424400-sxk-kayfun-mini-v3-styled-rta-rebuildable-tank

Looks a nice tank might have to get one.

[Deleted]

tsoko , I don't think those pictures are of the SXK clone, but possibly the cheaper clone. My SKX has logo's for a start and the metal has a slightly darker hint to it. It looks much much nicer in your hand than in those photo's at the very least :-)

[Deleted]

I can vouch for that one, I have a genuine and the SXK and you honestly can't tell them apart.
Outstanding flavour chasers MTL tanks

[decoy]

have to admit I cot a no name clone for a tenner and its surprisingly good
.3 mm kanthal spaced round 2mm for about a 1ohm build has been the best build ive found
not a high wattage tank and the 19mm is a bit of an odd size so a good excuse to buy a new batt

[Deleted]

@paulo, ahh mate - I still owe you a pint or three for putting me on to the UTA2 (I have 3 of them now) just awesome tanks

decoy I had read that the cheaper clones were great too - you have to hand it to SvoëMesto, they've done it again with this design. Haha, fuuny you say that, I've been looking this week for my first tube style mod to pop the Kayfun on. I nearly ordered a Vamo 5 this morning from FT, but thought I'd keep looking for something more recent :-)

[TJ]

I got this cheaper one www.fasttech.com/p/4278000 and actually managed to coil it myself (the first ever) and it vapes lovely, I've a problem in that I can't seem to get the airflow quite to my liking but that's user error, machining is lovely, no machine oil and the flavour is spot on, no leaking, no nothing to report.

I haven't had a Kayfun before so have nothing to compare it to but it was so easy to do and use that I may have ordered another couple, be rude not to when they listed a pink one and then a blue one as well

Monthly vape budget blown but hey you only live once is my motto

[buggritt]

I was lucky to have a try of the genuine v3 mini. Didn't find it amazing, just good. However, for a 2ml tank it's miles too long. The flavour is on a par with the Erl mini, sadly no longer available. That has no issues with leaking, and has a much easier top fill. Cheaper too.
Having read the thread on FT, I bought the "tube style" atomizer someone recommended instead. Kayfun deck, flavour just as good, much more compact.

[Mrsmac]

Apr 14, 2016 20:25:22 GMT buggritt said:

I was lucky to have a try of the genuine v3 mini. Didn't find it amazing, just good. However, for a 2ml tank it's miles too long. The flavour is on a par with the Erl mini, sadly no longer available. That has no issues with leaking, and has a much easier top fill. Cheaper too.
Having read the thread on FT, I bought the "tube style" atomizer someone recommended instead. Kayfun deck, flavour just as good, much more compact.

do you have a link at all please?

[sydsut]

Fasttech Tube style tank

[Mrsmac]

Apr 14, 2016 21:10:09 GMT sydsut said:

Fasttech Tube style tank

thank you very much

[sydsut]

A pleasure Mrs M

[phtumshk]

I have a tube, thirsty little bugger even at 1ohm and 12watts.