number6
New Member
Joined:February 2013
Posts: 33
Location:
Likes: 14
Recent Posts
Last Online Sept 9, 2022 7:19:54 GMT
|
Post by number6 on Jul 23, 2016 15:04:48 GMT
Hi
Can anyone recommend a good non-leak sub tank?
I currently use an Advocado 24 with my Neon 70W TC and really get on well with it apart from at any angle but fully vertical it leaks all over the place.
I also have a Kanger mini and a Cleito which whilst a less prone to leaking still do so when in your pocket.
I'm just looking for something I can at least sit down with it in my pocket without leaking all over the place.
Thanks for any advice
6
|
|
flavourtank
VENDOR Employee/Associate
Vape cloud Brighton :)
Joined:March 2013
Posts: 4,803
Location:
Likes: 2,786
Recent Posts
Last Online Jul 17, 2019 8:07:14 GMT
|
Post by flavourtank on Jul 23, 2016 15:12:42 GMT
Hi Can anyone recommend a good non-leak sub tank? I currently use an Advocado 24 with my Neon 70W TC and really get on well with it apart from at any angle but fully vertical it leaks all over the place. I also have a Kanger mini and a Cleito which whilst a less prone to leaking still do so when in your pocket. I'm just looking for something I can at least sit down with it in my pocket without leaking all over the place. Thanks for any advice 6 have you tried the isub tanks, mainly isub v, isub g I have used and not had a prob, and if you use the stock coils that are horizontal you can rewick them. Coils for isub are: 0.2ohm 0.5ohm 1.8ohm 2.0ohm
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 22, 2024 3:12:53 GMT
|
Post by Deleted on Jul 23, 2016 15:20:31 GMT
The only tanks i have now are the cubis as they dont leak, all but impossible for them to do so. Ok yes some of the coils are crap but the notch and 0.5 ss coils are ok. So for a out and about tank i find them very good but for home use where you can keep them upright there is a lot better tanks out there.
|
|
joeten
Super Member
Joined:February 2016
Posts: 3,079
Location:
Likes: 1,893
Recent Posts
Last Online Jan 9, 2021 18:38:42 GMT
|
Post by joeten on Jul 23, 2016 15:40:10 GMT
+1for the Isub.
|
|
VapingBad
Mod Maker
Mr Fix-it
Joined:January 2014
Posts: 13,800
Location:
Likes: 14,176
Recent Posts
Last Online Oct 6, 2024 16:13:51 GMT
|
Post by VapingBad on Jul 23, 2016 17:31:45 GMT
Steam Crave Aromamizer RDTA
|
|
gill2009
Super Member
Gillybeans
dementing disgracefully
Joined:March 2014
Posts: 11,001
Location:
Likes: 10,864
Recent Posts
Last Online Nov 21, 2024 17:17:01 GMT
|
Post by gill2009 on Jul 23, 2016 17:58:22 GMT
Innokin i-sub Joytech Cubis Never had so much as a dew-drop
|
|
Bob
Super Member
Vapefest '17 Legend
Joined:March 2014
Posts: 1,792
Location:
Likes: 1,646
Recent Posts
Last Online Nov 8, 2024 10:03:04 GMT
|
Post by Bob on Jul 23, 2016 21:56:19 GMT
+1 for the Aromamizer
|
|
jonathan303
Mod Maker
Joined:February 2015
Posts: 279
Location:
Likes: 363
Recent Posts
Last Online Mar 20, 2018 21:24:56 GMT
|
Post by jonathan303 on Jul 23, 2016 22:00:36 GMT
Wotofo Sapor RTA
|
|
tim
Super Member
Joined:February 2015
Posts: 2,137
Location:
Likes: 1,516
Recent Posts
Last Online May 25, 2022 22:18:37 GMT
|
Post by tim on Jul 23, 2016 22:07:34 GMT
Ehpro Bachelor, Eleaf Lyche, Wismec Theorem, and Steamcrave Aromamizer are four of my tanks which have never leaked.
However, nearly all my tanks have leaked, but don't leak if I wick them correctly. The wick is the main cause of leaks.
I know I've said this before, but if your tank leaks, it's probably due to poor wicking. Even if its a replacement manufactured wick.
|
|
number6
New Member
Joined:February 2013
Posts: 33
Location:
Likes: 14
Recent Posts
Last Online Sept 9, 2022 7:19:54 GMT
|
Post by number6 on Jul 24, 2016 0:46:06 GMT
Thanks for all the replies.
Plenty for me to look though... cheers
|
|
number6
New Member
Joined:February 2013
Posts: 33
Location:
Likes: 14
Recent Posts
Last Online Sept 9, 2022 7:19:54 GMT
|
Post by number6 on Oct 9, 2016 11:29:08 GMT
Just thought an update may be good for anyone else looking for the same.
After some tests on various tanks I have settled on the Isub V Vortex and for longer spells with out refilling the Isub Apex.
Both tanks have zero leakage and a wide range of coils readily available. They are very easy to fill and swapping out the coil is so easy.
I prefer the vortex because I like small tanks. The only downside is that there does not seem to be a replacement tank glass available. So if you break one as I did thats it unless they do come out with a glass replacement in the future.
I have now completley stopped making wicks etc and just use these, they are simple and provide great flavour.
Anyway hopefully this info will be useful for someone.
6
|
|
joeten
Super Member
Joined:February 2016
Posts: 3,079
Location:
Likes: 1,893
Recent Posts
Last Online Jan 9, 2021 18:38:42 GMT
|
Post by joeten on Oct 9, 2016 12:33:16 GMT
|
|
|
Post by Perpetua on Oct 9, 2016 13:32:41 GMT
After some tests on various tanks I have settled on the Isub V Vortex and for longer spells with out refilling the Isub Apex. Both tanks have zero leakage and a wide range of coils readily available. They are very easy to fill and swapping out the coil is so easy. I prefer the vortex because I like small tanks. The only downside is that there does not seem to be a replacement tank glass available. So if you break one as I did thats it unless they do come out with a glass replacement in the future. I have now completley stopped making wicks etc and just use these, they are simple and provide great flavour. Good to hear that you've had some leak free success number6 . . . . I'm a huge iSub fan myself. The 0.5ohm heads are an absolute doddle to dry burn and rewick - even a coilaphobe like myself can manage this level of technical doings!
|
|
markus
Super Member
Joined:August 2014
Posts: 812
Location:
Likes: 588
Recent Posts
Last Online Nov 28, 2015 2:55:44 GMT
|
Post by markus on Oct 10, 2016 2:19:57 GMT
Cubis is the ONLY tank ive ever had that just does not leak, the only problem I do have with it is when I fill it up too much (because its hard to see the max level on a black one) and a bit leaks out when i screw the top back on. Also I'm a direct lung vaper & i find it a bit of a tight draw, but otherwise a great little tank. I'd like to try a cubis pro but until i find out if its got better airflow i'm kinda shying away from it.
|
|
number6
New Member
Joined:February 2013
Posts: 33
Location:
Likes: 14
Recent Posts
Last Online Sept 9, 2022 7:19:54 GMT
|
Post by number6 on Oct 13, 2016 16:17:13 GMT
Cheers and thanks I will look into these.
|
|