anon4
Super Member
Joined:February 2016
Posts: 527 
Location:
Likes: 207
Recent Posts
Last Online Jun 17, 2018 21:52:45 GMT
|
Post by anon4 on Oct 4, 2016 18:25:04 GMT
Buy the demon killer "alien" wire (flat clapton). Make 2x 3mm 6 wrap coils. Will be 0.3ohms ish (mine keep fluctuating, not sure if 510 or tank to blame, connections are tight. Wick sparingly, tight in the coil but don't let them wiggle or those hotspots will come back! What I mean is trim shortish, I like to cut flush with the deck, but you need a thicker wick and at least 3mm coils for this so adjust to preference. I see so many users absolutely cramming cotton in there, probably to reduce spitback but a tighter wick in coil will do the same and allow quicker wicking. Check your positive pin is tight, the insulator is easy to short and fry, I've done it! Would've done it again in fact but smok stopped me firing this time. Why couldn't the r200 save my deck the first time???? Anyway prime well have the afc open to near full but not fully open or it will mute flavor, crank the thing to 150w and enjoy! The experience is somewhere between the octuple and the quad for me, flavor pops a bit more on the stock coils but its close. Id say its on par with the sextuplet coil.  |
|
Greigster
Mod Maker
Provari Pimper
Joined:November 2012
Posts: 4,311
Location:
Likes: 3,225
Recent Posts
Last Online Jul 11, 2024 8:49:03 GMT
|
Post by Greigster on Oct 4, 2016 19:08:49 GMT
Have you got a link for the demon killer "alien" wire please.
|
|
minime
Super Member
The Butler
Joined:December 2013
Posts: 2,441
Location:
Likes: 903
Recent Posts
Last Online Nov 20, 2014 18:21:35 GMT
|
Post by minime on Oct 4, 2016 19:29:15 GMT
Don't queen of vapes do it.
|
|
sydsut
Super Member
Orchid Collector
Vaping Is Good For You... I Vaped, I Saw, I Concurred.
Joined:September 2014
Posts: 11,930
Location:
Likes: 7,097
Recent Posts
Last Online Apr 10, 2021 0:20:40 GMT
|
Post by sydsut on Oct 4, 2016 19:51:27 GMT
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Oct 4, 2016 20:42:45 GMT
I run fused claptons in mine, 7 wraps 3.5mm ddiameter to cover the air holes, hardly any wick and flavour is full on.
Using nichrome 80 and also at a 150watts.
It's a fair beast, prefer the quality of my vcmt's but still impressive for the money
|
|
DaveJ
Super Member
Wood Wizard of Oz
Locked down at home.
Joined:September 2016
Posts: 1,723
Location:
Likes: 2,738
Recent Posts
Last Online Oct 31, 2024 3:07:26 GMT
|
Post by DaveJ on Oct 5, 2016 6:21:48 GMT
.... crank the thing to 150w and ... 150 Watts? *shudder* Clearly I've stumbled into the wrong area... sorry. You fellas enjoy your thing!  |
|
anon4
Super Member
Joined:February 2016
Posts: 527
Location:
Likes: 207
Recent Posts
Last Online Jun 17, 2018 21:52:45 GMT
|
Post by anon4 on Oct 5, 2016 7:15:05 GMT
I got the wire off ebay. I noticed one good thing with the replacement deck the grubs are holding up a lot better. Lol it's not that hot at 150w with all that airflow. The way this was designed seem to get more flavor this way vs closed off and lower watts
|
|
anon4
Super Member
Joined:February 2016
Posts: 527
Location:
Likes: 207
Recent Posts
Last Online Jun 17, 2018 21:52:45 GMT
|
Post by anon4 on Oct 6, 2016 4:24:35 GMT
Had to knock it down to 140w, throats getting a bit rough. Maybe I will finally drop to 3mg
|
|
DaveJ
Super Member
Wood Wizard of Oz
Locked down at home.
Joined:September 2016
Posts: 1,723
Location:
Likes: 2,738
Recent Posts
Last Online Oct 31, 2024 3:07:26 GMT
|
Post by DaveJ on Oct 6, 2016 5:29:32 GMT
... crank the thing to 150w and ... Had to knock it down to 140w, throats getting a bit rough I'm saying nothin'! Not a word....  |
|
anon4
Super Member
Joined:February 2016
Posts: 527
Location:
Likes: 207
Recent Posts
Last Online Jun 17, 2018 21:52:45 GMT
|
Post by anon4 on Oct 6, 2016 6:25:24 GMT
... crank the thing to 150w and ... Had to knock it down to 140w, throats getting a bit rough I'm saying nothin'! Not a word.... Had the same when I got a tfv4 and I was on 12mg. I've always liked it higher |
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Oct 7, 2016 2:34:50 GMT
Had to knock it down to 140w, throats getting a bit rough. Maybe I will finally drop to 3mg I use 3mg in drippers and and the likes of the tfv8's and vcmt's. 12mg in the kfl+ Anything stronger than 3mg in those beasts at a 150 and it'd rip my throat lol |
|
xs2man
Super Member
Joined:July 2013
Posts: 1,256
Location:
Likes: 760
Recent Posts
Last Online Nov 28, 2018 18:40:20 GMT
|
Post by xs2man on Oct 7, 2016 5:46:17 GMT
Had to knock it down to 140w, throats getting a bit rough. Maybe I will finally drop to 3mg I use 3mg in drippers and and the likes of the tfv8's and vcmt's. 12mg in the kfl+ Anything stronger than 3mg in those beasts at a 150 and it'd rip my throat lol Or your nostrils, ha ha ha. I just use 6mg all the time for everything. But then I am too lazy to mix up different strength batches. |
|
anon4
Super Member
Joined:February 2016
Posts: 527
Location:
Likes: 207
Recent Posts
Last Online Jun 17, 2018 21:52:45 GMT
|
Post by anon4 on Oct 7, 2016 10:08:10 GMT
I use 3mg in drippers and and the likes of the tfv8's and vcmt's. 12mg in the kfl+ Anything stronger than 3mg in those beasts at a 150 and it'd rip my throat lol Or your nostrils, ha ha ha. I just use 6mg all the time for everything. But then I am too lazy to mix up different strength batches. I'm the same, trialling some 3mg now though cos got a nasty cold. This recipe is pretty good I just threw it together to have something mentholly 5% FW blue ice 5% FW grape soda 4% tpa strawberry 1% ethyl maltol |
|
