Kayfun Lite Chimney Barrel Assembly

[shiny]

Kayfun Lite Chimney Barrel Assembly 

While I had the Kayfun apart I remembered an older post I had made regarding the correct way to assemble the barrel section of the chimney and thought it would be useful repeating here.

Take a close look at both ends of the inside threads of the barrel section and you will notice (on the authentic) that one end has a bevel. This end needs to be screwed onto the deck as it allows the liquid to flow freely along the juice channels.





The other end which has the threads running all the way to the top will then have the chimney cap screwed onto it.





This was engineered by design into the original Kayfun Lite/Lite Plus but unfortunately the barrel was not marked in anyway and the correct orientation omitted from the instructions.

[Perpetua]

Moved as requested shiny.

[shiny]

Thank you Perpetua, CDO (I mean OCD) going back to normal level again.

[Perpetua]

Jun 12, 2018 18:55:52 GMT shiny said:

Thank you Perpetua , CDO (I mean OCD) going back to normal level again.

Very welcome shiny . . . . I don't mind appearing to be a Kayfun Fan Girl.

( Something I've never bought, must admit. Give me time! )

[beedee]

Thanks for this, shiny, next time I have my KF Lite clone apart I will look out for this.