WANTED: People for testing our new device

[aaront903]

Mine also,thank you

[ibalders]

So far I'm liking it, it seems a well made little mod and quite good looking.

I've been vaping it with one of the higher 1.0 Ohm coils and it's giving me a very good vape.

I'm also using it with the using it on the tightest airhole setting as I prefer a MTL vape.

The fire button is very easy to use with a nice click to it, and filling up with juice is extremely easy

So far it's a thumbs up for me but let's see how it fairs after a few good day's of vaping.

[tcg69]

I am having problems using the 1.0 Ohm coil getting gurgling and flooding and leakage, have read the manual about clearing the excess liquid but no luck. I have gone onto the 0.5 coil and having no problems at all great flavour and Vapour the turbo coils there advertising look interesting pity not one in the pack to try. Overall I think it's a cracking bit of kit.

[gill2009]

Jul 5, 2018 7:29:38 GMT tcg69 said:

I am having problems using the 1.0 Ohm coil getting gurgling and flooding and leakage, have read the manual about clearing the excess liquid but no luck. I have gone onto the 0.5 coil and having no problems at all great flavour and Vapour the turbo coils there advertising look interesting pity not one in the pack to try. Overall I think it's a cracking bit of kit.

  JAC Vapour did say they were still somewhere in Amazon...& if they find them, he will send some turbo coils out 

[shiny]

Device came yesterday and the juice today, so I am now randy to roll.

[tcg69]

Jul 5, 2018 12:27:04 GMT shiny said:

Device came yesterday and the juice today, so I am now randy to roll.

 shiny you must have different device to me, mine doesn't make me Randy

[Perpetua]

Jul 5, 2018 12:27:04 GMT shiny said:

 so I am now randy to roll.

. . . . . TMI perhaps shiny !

The VIM has also landed here . . . . using with the 1.ohm coil and the supplied eliquid ( which is most enjoyable ) on the MTL setting. It's quite an airy draw, which suits me perfectly and from the limited use I've so far given it, I think it's fab!

My only slight negatives, is that I'm finding the mouth piece can get quite hot, which I'd suspect is my style of chugging, as opposed to the device itself. The other mention I'll make is of the airflow control widget, I can't see that taking much rough or clumsy handling without becoming detached.

A couple of pictures, with a side by side size comparison to the Smartbox, which is similar in its functionality.

[JAC Vapour]

the turbos are still in the Amazon Abyss, but we should have the following batch arrive around the 15th hopefully, so I'll get some of those out to people wanting to try them.

The airflow is basic, it's basically designed to be set once, that pretty much came from research with our S22 tank, where around 80% set the airflow once and did not adjust, and most juts left it wide open and let the coil bore set the airflow. We are also going to provide cheap spares for people that lose this part, I think it will break before it pops out though, it's pretty well anchored.


Somebody is also bound to mention the bottom usb as well : ) That was my decision, based on it's easier to use while charging, and keeping size down and expense were a priority over the side slung connector. We had a good reliable board that was bottom slung Usb, we could have customised this to be side on, but that would have added cost, and it would have added width and length to the design, about 3mm each way, it doesn't sound a lot, but to maintain proportions it increased bulk quite a bit. The device should not leak if left in any position, but I realise some people used will have a personal preference for this to be standing while charging, hopefully it will not affect enjoyment or use on a practical level though.

[JAC Vapour]

Is anybody still waiting for the unit to arrive? If so please email me and I can check, many thanks. Also everybody should now have the link to the form for testing feedback.

[Greigster]

Jul 9, 2018 13:41:12 GMT JAC Vapour said:

Is anybody still waiting for the unit to arrive? If so please email me and I can check, many thanks. Also everybody should now have the link to the form for testing feedback.

Hi Andy, thank you for the kit, I am very impressed.

I don`t have the link to the feedback form......where do I find it? Doh, found it, soz.

Also could you put me on the list to try the Turbo coils when available please.

Cheers

Neil

[JAC Vapour]

Yes when I get hold of the turbo coils, I'll get some out to everybody that's interested. I think some were to be with us today, but haven't seen them go into stock yet. I'll update about it tomorrow, once I know what's happening.

[JAC Vapour]

okay I now have some turbo 0.7ohm for testing, only got 2 per person for the people involved in the test, so if you want to give them a spin, email me at [e-mail] and I'll ship some out.

[Greigster]

Jul 12, 2018 8:07:23 GMT JAC Vapour said:

okay I now have some turbo 0.7ohm for testing, only got 2 per person for the people involved in the test, so if you want to give them a spin, email me at [e-mail] and I'll ship some out.

Thanks Andy,

Email Sent

Neil

[Perpetua]

Jul 12, 2018 8:07:23 GMT JAC Vapour said:

okay I now have some turbo 0.7ohm for testing, only got 2 per person for the people involved in the test, so if you want to give them a spin, email me at [e-mail] and I'll ship some out.

And done, thank you Andy.

[shiny]

Jul 12, 2018 8:07:23 GMT JAC Vapour said:

okay I now have some turbo 0.7ohm for testing, only got 2 per person for the people involved in the test, so if you want to give them a spin, email me at [e-mail] and I'll ship some out.

Yes please Andy, email sent.