Recent Posts

Having a warm/humid spell 23-25C - and having to reduce the overall power going into me juice

The warm weather changing the viscosity of me juice and making it effectively thinner or runnier, and am getting more spit back etc

Same juice (around 60/40 VG/PG) - using the SS heads for the Cuboid/Cubis with SS Notch and Cuboid Mini and even with Kanthal in me KST mini

I've experienced this before with VV/VW in colder/warmer climes and even the heights of UK summers/lows of winter - just drop the power in the summer and raise it in the winter.

Now being new to TC (and an idealist) i had assumed that the TC side of things would balance this off - no matter what the temperature outside the system the TC would regulate the internal system - so that this would no longer be an issue.

So where did me assumption go awry? Seemed so feasible

According to Chrisgprime on UKV - Joyetech UK - AKA Totally Wicked and Eleaf UK - aren't going to sell anything above a 2ml tank (due to the TPD) - so that rules at the Cubis, Melo...

Today's Update:
Started the day (having stayed up till silly O'Clock to listen to Spurs go all Spursy ) with a fully charged Mini with the SS 0.5 Ohm on board.

So started vaping at 12.45 and had classes all afternoon - the battery just died at call it 9.30pm - so almost 9 hours.

Set to SS 230C at 25W's - now that's a tad better

Also updated the OP to save folk scrolling all the way down here

Continuing the comparison of Notch SS 0.25 (now reading 0.3) vs SS 0.5 from the above

Popped new Batts into me Cuboid - so Cuboid + Cubis with the Notch and Cuboid Mini + SS 0.5

Much more balanced contest (though theoretically they all have the same type of chip) i haven't been able to update them though.

With the Cuboid mini set to SS 230 @ 25W and the Cubis and Cuboid set to SS 230 @ 35W - they just about compare - Flavour, VP and Warmth.

With a longer battery the Notch on the Cuboid does run nicely on the Cuboid SS 240C @ 45W's

So for me the best option for the Mini seems to be the SS 0.5 given it's much more limited battery - i've just hit the 5 hour mark and still have 1/4 battery left. Give it a proper run tomorrow - when i actually have a full afternoons work which will give it more realistic figure anyway

Thee be correct prr - Eleaf 60W doesn't seem to be SS compatible - unless there's an upgrade?

I have a .25 Ni Aspire head in me FuryTank 2 - that i've been really enjoying - and i was a tad sceptical but it came with it so thought i'd give it a go as supply lines are complicated in China LoL

I still like the 0.3 Kanthals - i i know FT does some generic - fit Aspire and Melo coils

Updated to add
Took around between 2-3 hours ( last checked at just after 2 hours without being full) to fully charge using a 1A USB - (Dual USB - max 2.1A but had me spare phone battery charging too - see if it makes any difference tomorrow).

Trying the SS Notch in me Cubis + Rx200 (reads 0.28 Ohms) side b side with the SS 0.5 in me Cuboid mini set up (reads 0.55 Ohms after DiscoDes posting about looking for them -

Cuboid mini set to 25W and 230C and having to set the Rx200 Notch to 40W and 230C to match it!

Never really tried the SS in the cubis - i dropped the original after only a couple of days - and hadn't gotten around to trying the SS

So having now tried them concurrently - is the Notch significantly better? For the Cuboid mini - with its limited battery life - for me i must say probably not. In the Rx200 - the Notch definitely has plenty more 'playing' room - having a much wider range of options for finding everyone's vaping 'sweet spot' - and of course the promised added longevity

BTW - unsurprisingly - the 1.5 O Clapton coils (of which i ordered a couple of extra packs) has been the least impressive i've tried - like the MTL and battery life - but the flavour is disappointing in comparison - though acceptable at a push! LoL