Recent Posts

I tend to buy all my coils ready shaped (so to speak) and I order most from fasttech China as they are really cheap and I cant tell much difference between them and bespoke handmade in UK versions. I recommend wotofo or UD as a good Chinese brand but just have a look and read reviews on various coils and brands on their website. Obviously there's a couple of weeks wait but I normally make sure I've plenty of stock in.

One ready made coil can last a fair time if you are happy to clean and rewick regularly. A dry burn (coil with no wick but powered on mod to get built on crud off) and then new cotton wick and you are good to go for another few days.

When fitting a ready made wire for the first time its good to slide a screwdriver/drill bit through middle so you dont deform coil whist getting legs of coil tightened up but its a fairly straightforward task and youtube has lots of tutorials to help you along the way and feel free to ask in forum, we are all happy to help

This would make ideal starter mech squonk kits as there’s lots of extras included since I have quit squonking , I just didn’t get on with the format well so it hasn'tseen much use. Molly was purchased from the second hand market and are in the same condition as when I bought them.

I paid £155 originally for Molly by L’atelier V1 and Psyclone Hadaly RDA  and am asking £85 which includes extras and everything listed below.


Molly V1 by rrp: 130CHF = £95


2x additional doors rrp: 20CH each (smoked, fluoro orange & fluoro green supplied) rrp: £30
Fitted with silver contacts and replaced 510 nuts to silver, in clean condition 7/10

Rockmodz button and driptip in fluoro green (to match door) rrp: £18
Rockmodz 22mm atty ring & button in fluoro pink rrp: £18
Rockmodz black delrin 22mm beauty ring rrp: £6 and atty lock rrp: £3

Psyclone Hadaly RDA rrp: £80

NO BOX or spares included, sorry - but it is genuine and serial numbered, some faint scratching around bezel wording 5/10 (see photo) Includes freebie frosted & ultem caps as they are fasttech.

Cthulhu Hustur v2 rrp; £20
As new, barely used as I don’t like chuff caps and favoured single coil builds.

I will also throw in Dee Mods {clone} Solo RDA and bf shift Boostlab {clone} as I always liked a black rda on it as it looked so good against the black delrin body

Also supplied with 1 filler bottle & 3 bottles (2 unopened) and ‘bag of bits’ (original 510 nuts/tube sealing nubbins/510 protectors/bottle plugs/ bottle ‘O’ ring seals…)

I've used a mi-pod, an aspire breeze2 and an aspire spryte so far, i like the concept of pod systems for stealth vape or occasional use

I think I favour the aspire spryte most? Mainly because its got a nice slim mouthpiece, it takes aspire bvc coils so its cheap to run and its set at a constant output rather than lowering power as battery runs down, so I get the same vape whatever the battery state is. I also favour the fact it can take larger pods, jumping to 3.5ml capacity if a spare is ordered from China but it is on a slant so it doesnt stand up well and the mouthpiece cover that is designed to slot to base when in use is loose, i'm bound to lose that part soon. This was the smallest battery of teh three at 650mah but I do just use it as a handbag mod when popping out for a few hours max so it fits the bill for my usage.

Mi-pod was my first buy and its a winner on size but you can't chain vape as the mouthpiece is close to coil and my one is a bit leaky... but for stealth its an absolute winner. It also lasts longer than the other two so is reliable on a full days use and 1ml of juice but power isnt constant, not that I really noticed but I kept topping battery up whenever I had access to a plug. I managed a weekend away with only this mod and had no fears of nicotine withdrawal, as long as you use a stronger nicotine to satisfy any cravings I do feel there's a place for pods in todays' modern market.

The aspire breeze is somewhere in the middle of my choice, I like its use of coils into the pod though the breeze replacement coils aren't as cheap as their bvc (that the spryte takes) It has the highest battery capacity of the three but I find the mi-pod outlasts it by almost double. A plus is that a China bought pod offers another ml capacity bringing it up to 3ml and that it offers passthrough vaping so I use it in my car a lot (plugged into usb charging) so its ready to use always but the power does drop when using and I much prefer a constant output.

Glad you have it up and running, apparently some cleaning between the up and down buttons can help if its juicy they might be a bit stuck?
I went to take back plate off myself to check interior and it seemed stuck fast so I got a hold of window edge and the plate flew off, taking screen and its attached ribbon with it!


After testing the screen I was shocked but happy it still worked but then I had to set it up with ribbon going through from back to the front and into the clip on dna chip over an hour it took me, using toothpick and ceramic tweezers and about 30+ attempts but I finally got there was so SO difficult as the chip is almost flush to box and there's a lip, and ribbon had to slot under about 2mm from edge, I did it in the end but was almost crying with frustration! I wont be touching my other billet boxes......

I use BB's exclusively now so I don't mind buying all the extras, I always did like swapping out my mods in silicon coloured cases and matching driptips ....so this is just one step on! I've a few panels now so can swap the look easily and now sxk do cheap panels there's lots more options if you're watching the pennies.

I bought a fair few panels at vapefest, elemental mods were selling DIY panels, and £25 and I've spent hours on each one sanding and shaping and polishing, I enjoyed it and it was a very reasonable way to get lots of different looks for my BB's

They are very hardy and cope well with rough treatment but I'd probably buy a case if I was a bloke and throwing in pockets and chucking it about at work but as mines in my handbag and i'm not doing any manual labour, I try not to be precious over my mods as they are working machines but I love how I can set each one up with different draws, and power and replicate all styles of vaping on one (or in my case 5 )

I would have liked a usb charge facility, and thats where your's wins out but Ive been really shocked and pleased how long a battery lasts in my BB's, I get a full day/evening out on one tank and one battery. I'm always toking about a handbag so its no great pain to throw a juice bottle and a spare battery in a pocket, just in case.

I suppose BBV next step would be a rev5 that incorporated usb charging and if that was the case I'd just buy the one. After all, I've not rushed out to buy a 2018 model as its still a dna 60 but with additional silver writing on body (which is only useful if you're using see through panels....)

As for atty's I do have genuine ones but have all been bought on classifieds (and mostly the same with buttons and hybrid tips) I do prefer a hybrid driptip and my out and about mod will always have one but I've found if I put bigger o rings on my driptip I can get it to jam on the 510 and stay there for when I'm unscrewing to get tank out.

I'm favouring the steam tuners insider at the moment, once I put some wick down juice channels its been faultless and I've a couple of them so that's handy. My exocet is a great vape but I struggle to get out of tank, I think teh o ring is a bit too tight and ive gouged my thumbs twice, the ti flow seems to only work with chunky builds (that i'm not a fan of) and the vapeshell gives me dry hits if I dont suck hard! I'm a bit of a tootle puffer so it doesnt suit me as much as i'd like

And ....snap! I bought 10 oneshots and vapefest and followed that with 25 from Nom Nomz amazing deal, and I still have about 40 awaiting a mix (and lets mention the fridge full of premium juice I bought for a song at last years TPD sales)

I notice my banner says I've saved 10 tho since quitting smoking, but I probably spent it on vaping!