|
|
Post by warlordxxx - (Mark) on Jan 30, 2013 14:03:15 GMT
Ok Silver mod is now sold - red is still available - i have put this up on the site for £40 so i'll take the forum price down to £38 delivered
|
|
|
|
Post by warlordxxx - (Mark) on Jan 23, 2013 22:13:55 GMT
This one has been sold
|
|
|
|
Post by warlordxxx - (Mark) on Jan 13, 2013 14:06:30 GMT
Scrub that silver mod is still up for sale
|
|
|
|
Post by warlordxxx - (Mark) on Jan 13, 2013 1:57:43 GMT
Silver mod is now sold - Red is still available
|
|
|
|
Post by warlordxxx - (Mark) on Jan 12, 2013 15:41:23 GMT
Price now dropped - Need to order some meters for the next ones
|
|
|
|
Post by warlordxxx - (Mark) on Jan 10, 2013 20:50:46 GMT
 Warlords VV 18650 box mod Warlords take on the VV box mod - Features include - Takes 2 18650 batteries - Not supplied Made using the OKR T/6 with 6A limit Screw head potentiometer for voltage adjustment Voltage readout (silver has blue readout red has red readout) Interior on/off switch to avoid pocket misfires Standard 510 connection Currently only the silver and red are available i've made up one of each and am now waiting on the meters to do some more. General Use The 18650 battery fits into the mod – Negative (flat side) to the spring – Positive to the flat terminal Once the battery is inserted close the door of the mod and move the on-off switch to the ON position Attach your atomizer or cartomizer to the top 510 connection – Press the button switch and vape. Price to the forums £40 including P&P and paypal fees (please add £3 if recorded delivery required) |
|
|
|
Post by warlordxxx - (Mark) on Jan 7, 2013 19:32:38 GMT
Ok today i have a one off unregulated (4.2v start) mod .. Covered in black carbon wrap Blue "tron" style switch Takes one or two PROTECTED 18650 batteries (in parallel) Top rocker on/off switch Please note: There is no protection odule inside this mod - Please bear that in mind before purchase and please use with protected batteries ..   Price for this mod is £20 including delivery and paypal fees this mod will be on 3 forums so will go to the first PM on the forums time. |
|
|
|
Post by warlordxxx - (Mark) on Dec 31, 2012 16:42:24 GMT
Todays mods are the good old Altoid tins.. Warlords Altoid VV Tin mod Made with a black 3a horn switch. A dual 14500 battery mod that just plain works voltage range from 3v - approx 6v (depending on energy remaining in the batteries) Please ensure both batteries are at a level state of charge before placing them in the mod to use. Mods will be set to 4.2v before sending    FeaturesNative 510 connection Stainless washer / Drip guard ( spaces out the connector so tanks can be used without issue Interior volt meter Interior pot adjustment Interior on/off switch 3A horn switch Batteries14500 3.7v Li-Ion protected batteries will fit into this mod. Please ALWAYS USE protected batteries inside this mod using unprotected batteries may lead to battery failure and render the battery useless. Please charge your batteries safely and to the chargers guidelines – Never leave the house while batteries are charging or use a charger overnight. To ease removal of the batteries use a piece of insulation tape wrapped around the battery with the ends joined to make a pull tab. If shorting occurs in this mod there is a switch at the front to turn the device off cutting power from the battery – This is a safety feature on the device but can also be used to prevent mis-fires in the pocket and to switch the device off when not in use. General UseThe 14500 batteries fit into the mod as per the diagram on the inside of the box – Negative (flat side) to the spring – Positive to the flat terminal Once the batteries are inserted move the on-off switch to the ON position and close the door of the mod. Adjust voltage as required using the small screw on top of the blue potentiometer. Attach your atomizer or cartomizer to the top 510 connection – Press the button switch and vape. Altoids tins have now all sold out but if you would like a tin or custom tin let me know and i'll happily create you you're own tin for £20 |
|
|
|
Post by warlordxxx - (Mark) on Dec 30, 2012 21:53:31 GMT
Thank you Piper a return PM is in your inbox  |
|
|
|
Post by warlordxxx - (Mark) on Dec 29, 2012 16:45:05 GMT
Although i do have some other items to go in here at the moment they are incomplete so forgive me for the moment and i'll head straight to the new... New for 2013 is the battery meter, a simple device with spring loaded arm for testing batteries wether it be to see if they are dead or just to check if you charged it or not..  Warlords Battery Tester Battery tester for all your battery voltage needs - I came up with this idea with the help of a group of friends to test your batteries. Test your batteries when you take them off the charger Test before putting into a mod Ensuring batteries are the same level on insert and removal from dual battery mods Tester limits Voltage range: 2.8v - 25.2v Accuracy: +- 0.005v Tests 16340 up to 26650 Will test flat top and nipple topped batteries Arm is spring loaded and whole unit can be placed into your pocket and taken with you - Please note these are hand made using standard battery meters. Price for the Battery meter is £6 (on site for £7.99) + £1 P&P - Paypal fees included |
|
|
|
Post by warlordxxx - (Mark) on Dec 29, 2012 16:37:36 GMT
Third in the set is the 5v mod i made a few of these in one go but not too many as a lot of people do prefer variable voltage - but there are some that are happy with 5v regulated so i felt they deserved to be made.. The regulator is short and undercurrent protected so unprotected hi-drain batteries can be used in this mod - however please buy the nippled type batteries or ask via PM and i will happily convert the box for flat type use..  Warlords 5v box mod Made with a 3a horn switch in black - No LED 510 connection Takes 2 x 14500 protected batteries (not supplied) Uses a 3a TI regulator Regulated to 5V warlords 5V box gives a fantastic vape with plenty of vapour and throat hit. Again i have plenty of boxes and regulators so if you would like a different combination please feel free to ask. Price on the 5v mod is now down to £12 P&P and paypal fees included |
|
|
|
Post by warlordxxx - (Mark) on Dec 29, 2012 16:24:08 GMT
Next up is the first mods bigger brother the twin 14500. These were a natural progression from the first mod and offer the same voltage but with almost twice the run time - can be used with one or two batteries - If you use two please charge and use them together at the same time and again use protected batteries in this mod...  Warlords 3.7v box mod Made with a black 3a horn switch with a 5mm ultrabrite led Batteries14500 3.7v Li-Ion protected batteries will fit into this mod. Please ALWAYS USE protected batteries inside this mod using unprotected batteries may lead to battery failure and render the battery useless. Please charge your batteries safely and to the chargers guidelines – Never leave the house while batteries are charging or use a charger overnight. To ease removal of the batteries use a piece of insulation tape wrapped around the battery with the ends joined to make a pull tab. If shorting occurs in this mod there is a switch at the front to turn the device off cutting power from the battery – This is a safety feature on the device but can also be used to prevent mis-fires in the pocket and to switch the device off when not in use. General UseThis mod uses a high powered LED please do not stare directly into the LED as it is powerful. The 14500 battery fits into the mod as per the diagram on the inside of the box – Negative (flat side) to the spring – Positive to the flat terminal Once the battery is inserted close the door of the mod and move the on-off switch to the ON position press the button switch and the LED should now light up – If there is no power to the LED remove the door and battery and re-insert. Attach your atomizer or cartomizer to the top 510 connection – Press the button switch and vape. Available colour combinationsBlack button - Blue LED Price of these is now down to £8 including P&P and paypal fees - i do also still have a few boxes left so please let me know if there is something different you would like. |
|
|
|
Post by warlordxxx - (Mark) on Dec 29, 2012 16:12:56 GMT
Ok first up is the smaller 14500 mod - started making these in the beginning of vaping and have given away and sold more than i can remember but i made some stock and have some left so these are first up for sale  Warlords 3.7v box mod Made with a black 3a horn switch with a 5mm ultrabrite led. BatteriesA 14500 3.7v Li-Ion protected battery will fit into this mod. Please ALWAYS USE protected batteries inside this mod using unprotected batteries may lead to battery failure and render the battery useless. Please charge your batteries safely and to the chargers guidelines – Never leave the house while batteries are charging or use a charger overnight. To ease removal of the batteries use a piece of insulation tape wrapped around the battery with the ends joined to make a pull tab. If shorting occurs in this mod there is a switch at the front to turn the device off cutting power from the battery – This is a safety feature on the device but can also be used to prevent mis-fires in the pocket and to switch the device off when not in use. General UseThis mod uses a high powered LED please do not stare directly into the LED as it is powerful. The 14500 battery fits into the mod as per the diagram on the inside of the box – Negative (flat side) to the spring – Positive to the flat terminal Once the battery is inserted close the door of the mod and move the on-off switch to the ON position press the button switch and the LED should now light up – If there is no power to the LED remove the door and battery and re-insert. Attach your atomizer or cartomizer to the top 510 connection – Press the button switch and vape. Available colour combinationsBlack button - choice of Blue,Red,Green or Pink LED Blue Button - Blue LED Red Button - Red LED Green Button - Green LED Price of these is now down to £6 including P&P and paypal fees - i do also still have a few boxes left so please let me know if there is something different you would like. |
|
|
|
Post by warlordxxx - (Mark) on Dec 29, 2012 16:01:11 GMT
Hi everyone,
Hope you all had a wonderful christmas and aren't too stuffed with turkey and stuffing e-liquid ...
As the old year is about to depart and move onto a new one i've popped a few items together for a discount and added something nice and new at the end...
Please don't purchase these items through the site as the festive discounts will be for forum members only so please do flip me a PM if there is anything you would like or if you have any questions..
Have a wonderful new years,
Mark
|
|
|
|
Post by warlordxxx - (Mark) on Dec 18, 2012 23:28:47 GMT
I hope your sisters dog gets found and returned to his home before then but i will be traveling through Norfolk on Friday and will more than happily keep my eyes peeled.
|
|
