Recent Posts

Nice to see another problem solved.

There may be some people out there who have not made a similar mistake, Pepperty, but I'm not one them!

The other day I wondered why my favourite atty was flooding like mad just after I'd rebuilt it, then moved my keyboard to one side, to find the chamber cap lying under it!

Has always worked fine, then suddenly, it would not turn on.

Took the battery out and replaced, the mod came on immediately but the display just cycled from 1watt up to 70watt, then stayed there. Would not fire, would not adjust wattage, would not turn off with 6 clicks. 

I tried it without a tank installed - it turns on and off fine and the wattage adjustment works again, but stops working the moment I put a tank in, when it goes back to the above.

I cleaned all contacts and threads - no change.

I had recently installed a Vapeshell - thought this might be the cause of the problem so swapped it for the Exocet I had installed previously - same problem.

Have tried going into the menu - (press fire and the button nearest the tank), it takes me to screens to control puff numbers and taste control but, with no tank in, will not take me to temp control.

Have also tried locking the wattage (Press up and down button) - this seems to lock the wattage but it still does not fire and wont turn on or off unless I take the battery out and put it back in, in which case the same thing happens.

I don't have any instructions for it and can't find any on the web. I believe its an Asmodus gx70 chip.

I'm out of things to try!

Any suggestions, folks?

Not everything, decoy, for example, I've always said it's sydsut's fault I contracted shinyitus and Perpetua's fault I spend so much on concentrates.  I reckon it's my fault that pyr0 got tempted!

     

The Kanger dripbox takes pre-made coils - see here. A lot of people really dislike the atty, but I used mine for ages and found it fine, then did move on to other attys in the end.  

I used to have a mod that was always doing this Fagsareus - however, the wattage worked fine and there were no weak or burnt hits, so I put it down to a problem with the board or the software and ignored it. It gave good service for many months but then died because the 510 connector gave out after I had to use a bit of force to get a stuck atty off it!

Thanks, izan , looks like I'm back to my spheroid clone!

A quick fast forward through this will tell you most of what you need to know, decoy



I love mine.

Sorry, forgot you want talking out of buying it - the best I can do is say that all not buying it will get you is that you will be billetboxless!