Got my Vivi Nova

[Yorkshireman]

It came today thanks to vapeescape,does the bottom unscrew like the top as it is very tight and i don't want to force it,is there anything i should do with it first or is it fill and go.

[OneDay]

Fill and go, being careful to drip the liquid down the inside of the tank not the centre tube. The bottom will unscrew, better tight than loose!

[Deleted]

bottom does indeed unscrew. you should have 4 parts. tube, top and bottom screw bits and the wick bit unscrews from the metal tube thing.
great description hey!!!
think you can fill and puff.
i like mine for decadent flavours

[Super-Shiny]

Fill it up (missing the center tube) give it a good shake making sure wicks are soaked, leave it for a couple of minutes for everything to soak in and you are good to go

[genguskhan]

Enjoy your nova :)there is no turning back now, the VE ones are my choice for novas

[Yorkshireman]

Thanks,i was just worried the head may need tightening like on the clearos i have bought previously,i will have to persevere with unscrewing as i will eventually need to change the head.

[Yorkshireman]

It is not budging,the bottom is so tight i dare not force it anymore as i will damage it.

[OneDay]

There's no need to open it now. Fill it and use it, it will come apart when you need it to

[Yorkshireman]

The thing is it will not unscrew at all so i am worried if i fill it i will never get it undone to change the heads.

[raid2506]

Feb 12, 2013 11:59:25 GMT Yorkshireman said:

The thing is it will not unscrew at all so i am worried if i fill it i will never get it undone to change the heads.

Maybe after a few juice cycles the warming and cooling will have loosened things off?

[davess]

It can be a bit tight but it does unscrew.

[Yorkshireman]

It doesn't i'm afraid,i know any more force will damage it.

[brysoni23]

My friend had the same problem with his. the bottom was so tight it would not unscrew, he had to use that much force to unscrew it the 510 connector snapped off

[Deleted]

soak it in hot water then try using a cloth? i'd try this after vaping so you clean it too
also keep top screwed in until you loosen bottom bit. you could try screwing it the tight way slightly which might loosen it to unscrew it the right way?

[kibbster]

To fill a Nova (full tank, I assume mini is the same) you only have to unscrew the top, don't try and unscrew the bottom with juice in it
(we've all done it!)
The bottom unscrews if you need to wash it or change the head.

My Nova occasionally thread locks at the top, once I had to gently use pliers to loosen it.

The threads can be a bit tricky on the top part.