Anyone using a PCC Personal Charge Case for sd keyring ?

[C&C]

Edit: Is anyone using a PCC case to recharge the SD keyring or small 510 bats? I'm thinking of getting the SD keyring but would prefer if it can be charged on the hoof!. 


Hi,  I'm expanding my Kit(s). First up: for the grab and go/stealth kit is there a pcc that will safely charge Kanger esmart batteries, the SD keyring and any other narrow/short batteries up to 400mah? I'm not looking for a cig-a-like kit just a compatible charger.

I've found two on sale at i-vapour and vape escape but there are conflicting reports on whether the PCCs at 500 output can be used to charge low Mah batteries  ??? Any advice from people that have and use them would be appreciated.

Thanks in advance...




I'm also looking for a mod, VV/VW, shiny, well designed small battery that will last a couple of days but don't think that exists yet!!   Give it a year.....

[alansi]

Oct 2, 2013 20:02:42 GMT C&C said:

I'm also looking for a mod, VV/VW, shiny, well designed small battery that will last a couple of days but don't think that exists yet!!   Give it a year.....

Maybe this one?

[C&C]

Oct 3, 2013 1:59:24 GMT alansi said:

Yes! I'm thinking of getting that for the 'home' kit, difficult finding the later V3 version with ego threading in pearl chrome though


No-one using a personal charging case to recharge the sd keryring or slim 510 bats?
I'll edit the thread title for clarity if I can.

[DiscoDes]

I just use a "power pack" with 4 x 18650's in or my Itaste MVP and plug the regular charger into the usb output.

[Matt Gluggles]

You could kill 2 birds with one stone - by trying one of these

www.ivapour-elixir.co.uk/parts/batteries/epower-1800mah-usb-battery-1.html

On the one hand it is basically an 1800mah eGo battery

It also has a USB output - so it could be used as a PCC for a Keyring.


.

[Toby]

Oct 2, 2013 20:02:42 GMT C&C said:

Edit: Is anyone using a PCC case to recharge the SD keyring or small 510 bats? I'm thinking of getting the SD keyring but would prefer if it can be charged on the hoof!. 


Hi,  I'm expanding my Kit(s). First up: for the grab and go/stealth kit is there a pcc that will safely charge Kanger esmart batteries, the SD keyring and any other narrow/short batteries up to 400mah? I'm not looking for a cig-a-like kit just a compatible charger.

I've found two on sale at i-vapour and vape escape but there are conflicting reports on whether the PCCs at 500 output can be used to charge low Mah batteries  ??? Any advice from people that have and use them would be appreciated.

Thanks in advance...

The output of the 510 V1-Power PCC is only 80mA; so will be fine for most 510 batts (couldn't confirm on some of the other manufacturers, as there are a lot of different 510 batts out there), and is fine for E-smart batts.

I don't think that the SD battery will quite fit in the slot though (just too wide I suspect), and I can't find one here to test it...

[C&C]

Oct 3, 2013 17:02:03 GMT Toby said:

The output of the 510 V1-Power PCC is only 80mA; so will be fine for most 510 batts (couldn't confirm on some of the other manufacturers, as there are a lot of different 510 batts out there), and is fine for E-smart batts.

I don't think that the SD battery will quite fit in the slot though (just too wide I suspect), and I can't find one here to test it...

Thankyou! Yes, it was the 510 V-1 I was looking at and that was the info I was after. The SD keyring is 14 mm wide I belive. Is it possible you can let me know the max width and length of bats that will fit in the slot? Thankyou again.

[Toby]

Oct 3, 2013 17:13:42 GMT C&C said:

Thankyou! Yes, it was the 510 V-1 I was looking at and that was the info I was after. The SD keyring is 14 mm wide I belive. Is it possible you can let me know the max width and length of bats that will fit in the slot? Thankyou again.

At 11.5mm wide, the E-smart is the widest battery you can fit in it.

Longest 510 battery that will go in is 87mm long.

[Karma]

C&C I really think you should go for a MVP

myepack.co.uk/itaste-mvp-v2-0.html

It'll even charge your mobile phone

[charon]

Oct 3, 2013 18:16:49 GMT Karma said:

C&C I really think you should go for a MVP

myepack.co.uk/itaste-mvp-v2-0.html

It'll even charge your mobile phone

+1 for this portable charger/mod/and passthrough all in a neat package.

[C&C]

Thanks Toby

Oct 3, 2013 18:50:42 GMT charon said:

Oct 3, 2013 18:16:49 GMT Karma said:

C&C I really think you should go for a MVP

myepack.co.uk/itaste-mvp-v2-0.html

It'll even charge your mobile phone

+1 for this portable charger/mod/and passthrough all in a neat package.

hmmm... decisions. Might be a possibility esp with the problems getting hold of the itaste vv v3. Thanks. Just need to get over the squareness  and see if it comes in pearl chrome

[dreamylittledream]

Oct 3, 2013 1:59:24 GMT alansi said:

Oct 2, 2013 20:02:42 GMT C&C said:

I'm also looking for a mod, VV/VW, shiny, well designed small battery that will last a couple of days but don't think that exists yet!!   Give it a year.....

Maybe this one?

Battery won't last a couple of days on that baby - in fact if you are a medium to heavy vaper it really won't last the day

MVP might not be the prettiest thing in the world but it is massively practical

[C&C]

Oct 3, 2013 23:54:06 GMT dreamylittledream said:

MVP might not be the prettiest thing in the world but it is massively practical

Yes, finding the balance of form and function is tricky. I actually really like some of the smaller mech mods, unfortunately the ones that appeal seem to be well over £100! but that would be for another  thread...

Thanks everyone for the replies.