Fogger v2 Tips and Tricks

[Super-Shiny]

[remnant]

Okay then, I count no less than five different things I've (maybe) been doing wrong.

I imagine at least some of that lot should give me some scope for improvement.

Thanks Rom

[iLardyboy]

Would you recommend these Super-Shiny? I haven't got a tank style rba and was interested in this, a Magoo or Terminator. What would you recommend?

[MOOSE]

nice one romelee thanks. Get mine monday morin ,so will be following this

[Super-Shiny]

iLardyboy if you ain't used to messing around with RBA's than no, if you want to get into RBA's maybe a Magoo or Terminator or even a RSST.

[iLardyboy]

Oct 27, 2013 8:16:17 GMT Super-Shiny said:

iLardyboy if you ain't used to messing around with RBA's than no, if you want to get into RBA's maybe a Magoo or Terminator or even a RSST.

Cheers Super-Shiny, have you any tips and tricks for the Magoo and Terminator?

[Super-Shiny]

iLardyboy have a look at these threads:

allaboute-cigarettes.proboards.com/thread/29718/tips-terminator-nautilus-v2?page=1&scrollTo=534910
allaboute-cigarettes.proboards.com/thread/28262/review-terminator-rba-long-mod?page=1
allaboute-cigarettes.proboards.com/thread/28732/review-hercules

[gapy360]

Like Super-Shiny says the fogger is a little bit difficult to get working properly, the build itself is quite straight forward but it does sometime go dry, so it's a question of setting your airflow just right as this affects the juice flow too.
I struck fairly lucky with my first build of folded over 3mm Silica, but occasionally get a dry hit. Going to try folded over 2.5mm next as see what that's like.
Rsst is a great first rba Genesis style very easy. Can't comment on the magoo or terminator as haven't tried these

[Super-Shiny]

gapy360 read somewhere that getting a 3mm diamond tip drill bit and making the feed hole bigger it makes it better, basically gotta make the hole into a 3mm half moon....supposedly stops the dry hits.

[iLardyboy]

Oct 27, 2013 13:20:21 GMT gapy360 said:

Like Super-Shiny says the fogger is a little bit difficult to get working properly, the build itself is quite straight forward but it does sometime go dry, so it's a question of setting your airflow just right as this affects the juice flow too.
I struck fairly lucky with my first build of folded over 3mm Silica, but occasionally get a dry hit. Going to try folded over 2.5mm next as see what that's like.
Rsst is a great first rba Genesis style very easy. Can't comment on the magoo or terminator as haven't tried these

I wasn't really wanting to get into Genesis style attys as I think they would be out of my skill set. I'm starting to get used to recoiling Novas and Protanks, which is why I thought maybe a Fogger or Terminator would be ideal for me.

[gapy360]

Oct 27, 2013 13:37:06 GMT Super-Shiny said:

gapy360 read somewhere that getting a 3mm diamond tip drill bit and making the feed hole bigger it makes it better, basically gotta make the hole into a 3mm half moon....supposedly stops the dry hits.

Just seen this must have missed it yesterday, that makes massive sense I have been thinking along the lines of making the holes bigger.
Think I'm going to try 2.5mm first and cotton/micro coil to see what that does before I start "modding" it

[gapy360]

Thought I'd post a pic of my micro coil and cotton. Once the chimney is on I cut the wick pretty flush and push the last bits flush with the feed hole

[Stormwatch]

Just got the fogger and stuck it on my zmax and got low load, took out wick and recoiled reassembled and still low load, recoiled again and same any hints as to why this is happening coil looks neat and is not touching bottom etc. using .2 kanthal on the mesh wick that came with it. Edit think the mesh was causing the short doh

[Roscopecotrain]

This was a great read last night. All sorts of tips and tricks on the fogger v2 issues and styles of wicking.

ukvapers.org/Thread-Fogger-V2-review

Sent from my Galaxy Note 2

[gapy360]

Nov 2, 2013 11:32:04 GMT Stormwatch said:

Just got the fogger and stuck it on my zmax and got low load, took out wick and recoiled reassembled and still low load, recoiled again and same any hints as to why this is happening coil looks neat and is not touching bottom etc. using .2 kanthal on the mesh wick that came with it. Edit think the mesh was causing the short doh

Being impatient I tried the fogger straight out the box, awful! Burnt taste, dry hits. Have since tried silica (ok but occasionally got dry hits) the micro cool and cotton first build burnt the cotton cause it wasn't wicking properly, rewicked and removed the o ring under the chimney and now it's awesome!