HANAA on focal 30W £33 18650, in stock, new pics :) received

[BigG]

Mine turned up today along with a zenith clone, happy with it so far.
Ohms readout isn't miles off, jumps about a bit though, yet to build a sub ohm coil on it.
Time will tell if it lasts but hey 33 squid

[boyofford]

Jul 30, 2014 13:58:30 GMT BigG said:

Mine turned up today along with a zenith clone, happy with it so far.
Ohms readout isn't miles off, jumps about a bit though, yet to build a sub ohm coil on it.
Time will tell if it lasts but hey 33 squid

There shouldn't be any advantage doing a sub ohm coil with variable watts device, plus bigger/non sub ohm coil will get more juice contact so could be better.

Could be wrong, so someone correct me if I am!

Not done the sums on this device for optimum ohms, but would hazard a guess it will be between 1ohm and 1.5ohms.

[BigG]

Meant more to see how it copes with low ohm's more than anything else.

[boyofford]

Jul 30, 2014 15:16:20 GMT BigG said:

Meant more to see how it copes with low ohm's more than anything else.

ahh, I see, sorry if you already new that then

[robby]

Jul 30, 2014 15:16:20 GMT BigG said:

Meant more to see how it copes with low ohm's more than anything else.

My minimum stable seems to be about .7 ohms, anything lower and it doesn`t seem to want to play fair That`s fine for me though. I am usually between .7 and .8ohms.

[robby]

Jul 30, 2014 15:04:45 GMT boyofford said:

Jul 30, 2014 13:58:30 GMT BigG said:

Mine turned up today along with a zenith clone, happy with it so far.
Ohms readout isn't miles off, jumps about a bit though, yet to build a sub ohm coil on it.
Time will tell if it lasts but hey 33 squid

There shouldn't be any advantage doing a sub ohm coil with variable watts device, plus bigger/non sub ohm coil will get more juice contact so could be better.

Could be wrong, so someone correct me if I am!

Not done the sums on this device for optimum ohms, but would hazard a guess it will be between 1ohm and 1.5ohms.

Mine are always double coiled 1.5 or 2 ohm coils, so I end up with .75 or 1 ohm

[boyofford]

Jul 30, 2014 15:54:31 GMT robby said:

Jul 30, 2014 15:04:45 GMT boyofford said:

There shouldn't be any advantage doing a sub ohm coil with variable watts device, plus bigger/non sub ohm coil will get more juice contact so could be better.

Could be wrong, so someone correct me if I am!

Not done the sums on this device for optimum ohms, but would hazard a guess it will be between 1ohm and 1.5ohms.

Mine are always double coiled 1.5 or 2 ohm coils, so I end up with .75 or 1 ohm

In the magma? do you notice any difference in vape for given watts when using different ohms coils? might not be enough of a difference in ohms to tell anyway to be fair.

[robby]

Jul 30, 2014 16:00:49 GMT boyofford said:

Jul 30, 2014 15:54:31 GMT robby said:

Mine are always double coiled 1.5 or 2 ohm coils, so I end up with .75 or 1 ohm

In the magma? do you notice any difference in vape for given watts when using different ohms coils? might not be enough of a difference in ohms to tell anyway to be fair.

Very little to be honest, I have two drippers on the go most of the time, the Magma and one of the usual suspects, think it`s an Igo, there is certainly a difference between them. The magma flavour is definitely better.

[boyofford]

Jul 30, 2014 16:04:48 GMT robby said:

Jul 30, 2014 16:00:49 GMT boyofford said:

In the magma? do you notice any difference in vape for given watts when using different ohms coils? might not be enough of a difference in ohms to tell anyway to be fair.

Very little to be honest, I have two drippers on the go most of the time, the Magma and one of the usual suspects, think it`s an Igo, there is certainly a difference between them. The magma flavour is definitely better.

Next time you recoil one of them then maybe try different ohms for comparison in same device...my theory is bigger coil with more volts making same watts should work better

Just a theory though!

[mike weaver93]

robby

She arrived today - Oh my God!!!!!!!!!!!!!!!

Absolutely freaking amazin!! no bollux. Simply.... stunning.

Just wondering, Can I use the Panny batts ,we got from FT?, www.fasttech.com/p/1141102

I think they are 20 amp, can go down to 0.6 ohms.(Currently using VTC5) Been vaping at 22 watts - OMFG.

[BigG]

Jul 30, 2014 15:52:54 GMT robby said:

Jul 30, 2014 15:16:20 GMT BigG said:

Meant more to see how it copes with low ohm's more than anything else.

My minimum stable seems to be about .7 ohms, anything lower and it doesn`t seem to want to play fair That`s fine for me though. I am usually between .7 and .8ohms.

Aye made a 0.6 duel coil on the zenith, nowt happened, no check atty, no hot coils.

Is there any way to turn off the sleep mode?, its a pain in teh arse having to click it twice every time i pick it up

[mike weaver93]

robby

Just wondering, Can I use the Panny batts ,I got from FT?, www.fasttech.com/p/1141102

[robby]

Jul 30, 2014 19:16:08 GMT mike weaver93 said:

robby

She arrived today - Oh my God!!!!!!!!!!!!!!!

Absolutely freaking amazin!! no bollux. Simply.... stunning.

Just wondering, Can I use the Panny batts ,we got from FT?, www.fasttech.com/p/1141102

I think they are 20 amp, can go down to 0.6 ohms.(Currently using VTC5) Been vaping at 22 watts - OMFG.

I take it you like it then

I think those pannies are only recommended for 3A, dont be using them. Sorry I`m late, had major probs with the computer. You need 20 AMP and above really.

[dalealan]

Yours still going strong robby ??

[robby]

Jul 30, 2014 20:31:21 GMT BigG said:

Jul 30, 2014 15:52:54 GMT robby said:

My minimum stable seems to be about .7 ohms, anything lower and it doesn`t seem to want to play fair That`s fine for me though. I am usually between .7 and .8ohms.

Aye made a 0.6 duel coil on the zenith, nowt happened, no check atty, no hot coils.

Is there any way to turn off the sleep mode?, its a pain in teh arse having to click it twice every time i pick it up

I dont know of any way to turn off the "wait" state. You get used to it