ProVari P3

[lobeydosser]

<<<I don't have a mod where the threads don't get gunked up though normal use- even the billet box succumbs to it >>>

Aaaaaarrrggggg, Billet Box!!!!
Another over priced, over hyped, over complicated dust gatherer.

[blakey]

Nov 26, 2014 14:25:17 GMT lobeydosser said:

<<<I don't have a mod where the threads don't get gunked up though normal use- even the billet box succumbs to it >>>

Aaaaaarrrggggg, Billet Box!!!!
Another over priced, over hyped, over complicated dust gatherer.

Over complicated ???

Put an attie in the tank and fill it
Putt batteries in
replace back sliding door and vape till batteries run out- where did it get complicated?
Do you have one mate? if so have you tried a billet bridge with an aspire bvc head?

[lobeydosser]

Yes. Over complicated.
Yes I have one.
It came with 3 tanks of which I have ruined 2.
If you buy spare tanks from the USA and get nobbled by Customs, they will cost you and arm & a leg!
Many atties that should fit it, don't.
The sliding back has to be kept scrupulously clean and well oiled with a WD 40 felt tipped pen.
If I take it out and it is in my pocket, it is so heavy that I would need a set of Tommy Walsh's Braces just to keep my trousers up.
Oh an I would need a Shopping Trolley to drag around the spare batteries to keep the darned thing going.

Very stylish but not practical.

[Greg]

Well I gave mine the blakey clean today with IPA and IQ now 94%

[blakey]

Nov 26, 2014 19:36:04 GMT lobeydosser said:

Yes. Over complicated.
Yes I have one.
It came with 3 tanks of which I have ruined 2.
If you buy spare tanks from the USA and get nobbled by Customs, they will cost you and arm & a leg!
Many atties that should fit it, don't.
The sliding back has to be kept scrupulously clean and well oiled with a WD 40 felt tipped pen.
If I take it out and it is in my pocket, it is so heavy that I would need a set of Tommy Walsh's Braces just to keep my trousers up.
Oh an I would need a Shopping Trolley to drag around the spare batteries to keep the darned thing going.

Very stylish but not practical.

Sorry to hear that mate- personally I find it very light in the pocket.
That back- I use no lubrication at all I just clean it with a good cleaner and a dab of polish. That way I find it slides smoothly and doesn't attract grime anywhere near as fast.
I've modded boge cartos to take ceramic cups and I've used V2 divers and they work perfectly in the tank- when I'm feeling lazy I just use the billet bridge and a bvc coil.
Batteries I would have to agree with, they don't last too long do they
But I only use the mod for social occasions though so I don't have any problem with it.
My biggest issue is that you can scratch the damn thing just by breathing on it too hard

[lobeydosser]

I have a couple of Armistiques for mine, but my fingers are a bit shaky to try putting coils in them.
Hopefully once I get my new Vape Cave set up with some decent tools, I will be able to try my own coils and so give the Billet Box a proper go.

[Greg]

Nov 26, 2014 20:06:15 GMT blakey said:

Nov 26, 2014 19:36:04 GMT lobeydosser said:

Yes. Over complicated.
Yes I have one.
It came with 3 tanks of which I have ruined 2.
If you buy spare tanks from the USA and get nobbled by Customs, they will cost you and arm & a leg!
Many atties that should fit it, don't.
The sliding back has to be kept scrupulously clean and well oiled with a WD 40 felt tipped pen.
If I take it out and it is in my pocket, it is so heavy that I would need a set of Tommy Walsh's Braces just to keep my trousers up.
Oh an I would need a Shopping Trolley to drag around the spare batteries to keep the darned thing going.

Very stylish but not practical.

Sorry to hear that mate- personally I find it very light in the pocket.
That back- I use no lubrication at all I just clean it with a good cleaner and a dab of polish. That way I find it slides smoothly and doesn't attract grime anywhere near as fast.
I've modded boge cartos to take ceramic cups and I've used V2 divers and they work perfectly in the tank- when I'm feeling lazy I just use the billet bridge and a bvc coil.
Batteries I would have to agree with, they don't last too long do they
But I only use the mod for social occasions though so I don't have any problem with it.
My biggest issue is that you can scratch the damn thing just by breathing on it too hard

you could always give it a nano coating 

[Deleted]

Nov 26, 2014 21:10:54 GMT lobeydosser said:

I have a couple of Armistiques for mine, but my fingers are a bit shaky to try putting coils in them.
Hopefully once I get my new Vape Cave set up with some decent tools, I will be able to try my own coils and so give the Billet Box a proper go.

Clone with a genuine bridge from Atmistique is faultless.....albeit found on as its a clone but it works very well with BVC in it

[blakey]

Nov 26, 2014 21:14:00 GMT Greg said:

Nov 26, 2014 20:06:15 GMT blakey said:

Sorry to hear that mate- personally I find it very light in the pocket.
That back- I use no lubrication at all I just clean it with a good cleaner and a dab of polish. That way I find it slides smoothly and doesn't attract grime anywhere near as fast.
I've modded boge cartos to take ceramic cups and I've used V2 divers and they work perfectly in the tank- when I'm feeling lazy I just use the billet bridge and a bvc coil.
Batteries I would have to agree with, they don't last too long do they
But I only use the mod for social occasions though so I don't have any problem with it.
My biggest issue is that you can scratch the damn thing just by breathing on it too hard

you could always give it a nano coating 

Are you offering

I have the buggas covered with clear J-wraps and I swear they're scratching underneath when I look too hard at them

[Greg]

Nov 26, 2014 21:22:20 GMT blakey said:

Nov 26, 2014 21:14:00 GMT Greg said:

you could always give it a nano coating 

Are you offering

I have the buggas covered with clear J-wraps and I swear they're scratching underneath when I look too hard at them

I'd have to check its condition mate as haven't used any for yonks. I'll check tomorrow and if it hasn't chrystalised I'll send you a couple of mil if you want. 

1ml will be more than enough. 

[blakey]

Nov 26, 2014 21:27:10 GMT Greg said:

Nov 26, 2014 21:22:20 GMT blakey said:

Are you offering

I have the buggas covered with clear J-wraps and I swear they're scratching underneath when I look too hard at them

I'd have to check its condition mate as haven't used any for yonks. I'll check tomorrow and if it hasn't chrystalised I'll send you a couple of mil if you want. 

1ml will be more than enough. 

Cheers mate, I have some here but I hate the blooming stuff

Was hoping you'd pop round and sort it for me

[Greg]

Nov 26, 2014 21:39:56 GMT blakey said:

Nov 26, 2014 21:27:10 GMT Greg said:

I'd have to check its condition mate as haven't used any for yonks. I'll check tomorrow and if it hasn't chrystalised I'll send you a couple of mil if you want. 

1ml will be more than enough. 

Cheers mate, I have some here but I hate the blooming stuff

Was hoping you'd pop round and sort it for me

Bit of a treck mate, what type you got ?

[blakey]

Nov 26, 2014 21:57:52 GMT Greg said:

Nov 26, 2014 21:39:56 GMT blakey said:

Cheers mate, I have some here but I hate the blooming stuff

Was hoping you'd pop round and sort it for me

Bit of a treck mate, what type you got ?

Nano tech gloss metal coating but it's poxy stuff to use, does the job when it's applied though.

[lobeydosser]

My replacement P3 arrived yesterday and the guys came today and erected my new Vape Cave.
What more could a body ask for?????

[davetherayon]

lobeydosser watch Friday Night Dinner on C4 player. The Dad in that has a Shed. He uses it to hide from the wife & kids. In his case he reads old New Scientist magazines, yours will be your vaping den

Also he has a fridge full of beer and a TV (upgrade that to a broadband line and PC lol), do that and you're set.