Kayfun lite- Help Needed Please

[buliwyf]

I'll Start right now tom, will let you know how it goes

[Mrsmac]

Thanks for this Tom, I may also try this on the kayfun which won't fire on an istick as the bottom is kind of flush

[Deleted]

Cracking guide and fix Tom. But can I just throw in a word of caution. After extending the centre pin it can destroy the centre pin and grommet on the device when screwing on the atty if its over tightened, as this fix can leave a small ocd gap and the natural thing to do is screw it on a bit tighter to close the gap. Fortunately I have had no issue with my Kayfuns, but the Taifun doesn't fire on my hana clone , so I just use an airflow controller to make contact with the centre pin. Another reason all devices now should be fitted with a 510 spring loader or adjustable centre pin.

[buliwyf]

Tom , I did exactly as you explained in the tutorial, but i get the same message on DNA 30. I used the o ring from the spare screwdriver in the kayfun box. where do u think i went wrong. It does read on the vamo though

[Deleted]

Do you have another atty you can try on your DNA to rule out a problem with the device buliwyf ?

[buliwyf]

Its firing on the Vamo and i can use the protank on my DNA 30, so its not the device bud

[buliwyf]

Its the connection with my DNA 30 is what i am guessing as the kayfun fires on my vamo ?

[buliwyf]

OMG it started to work !!!

Thanks guys and thank you Tom for the guide.

Now i need to wick it with rayon and add juice to it and i wonder how much trouble that would get me into lol

[buliwyf]

i've filled it up twice and the juice just comes out from the drip tip and every other hole ?

[Greg]

Dec 13, 2014 15:36:13 GMT buliwyf said:

i've filled it up twice and the juice just comes out from the drip tip and every other hole ?

Check the tank is all screwed together properly and that you haven't lost the wee oring in the top cap, it's what the chimney connects with. If the oring is missing/damaged the atty won't be air tight and will leak like a sieve.

[Roger]

Dec 13, 2014 15:36:13 GMT buliwyf said:

i've filled it up twice and the juice just comes out from the drip tip and every other hole ?

Make sure that the chimney is sealing into the top cap o ring.  If you don't get a seal there it will leak everywhere.  On one of that model clone I've got, I have to use the smaller top cap with the full size tanks, the larger top cap o ring comes nowhere near the chimney top.

[buliwyf]

i see an o ring right at the bottom of the chimney stem ( black o ring) is that in the wrong place ? and ty guys

[Mrsmac]

That oring should be seated in the cap, on the underside of the opening if that makes sense. Should be able to push it back in

[buliwyf]

Thank you, cap = drip tip ?

[buliwyf]

My chimney comes half way, not all the way to the top,What am i doing wrong?