Kayfun lite- Help Needed Please

[buliwyf]

Dec 13, 2014 15:57:56 GMT Mrsmac said:

That oring should be seated in the cap, on the underside of the opening if that makes sense. Should be able to push it back in

oh yes, i just did that

but my chimey doesn't go all the way to the top

[Greg]

Here's where the oring should be

[Mrsmac]

Gregb definitely described it better than me lol sometimes it can skip down when unscrewing

[Roger]

Dec 13, 2014 16:06:39 GMT buliwyf said:

Dec 13, 2014 15:57:56 GMT Mrsmac said:

That oring should be seated in the cap, on the underside of the opening if that makes sense. Should be able to push it back in

oh yes, i just did that

but my chimey doesn't go all the way to the top

As I said in a previous post, try the other top cap (the smaller one, in height)

[buliwyf]

Thank you all for the help, I just got it working!!! my first RBA !!

I screwed in all the chambers in the box lol !! until i figured out that if i just use the glass one, then the chimney would fit , now i got to work out how to extend it !!

Thanks once again for all your help, couldn't have done it without you all

oh anybody know, how much juice the glass one holds?

[Roger]

Dec 13, 2014 16:33:21 GMT buliwyf said:

Thank you all for the help, I just got it working!!! my first RBA !!

I screwed in all the chambers in the box lol !! until i figured out that if i just use the glass one, then the chimney would fit , now i got to work out how to extend it !!

Thanks once again for all your help, couldn't have done it without you all

oh anybody know, how much juice the glass one holds?

From the bottom you should have:

Deck (that you build on)
Large or small metal section internally threaded at either end
Clear (or metal middle section with visible (external) threads)
Large or small metal section internally threaded at either end
Top section that chimney will reach
Drip tip

Internally you should have both parts of the chimney.

[aliscampbell]

I think full tank is 4.5ml and nano is 2.5ml

[buliwyf]

www.fasttech.com/p/1700500

I've got this Roger

Ty aliscampbell

[goneforagasper]

I'm getting a Kayfun for Christmas. my first RBA, can this support team please be on standby.

[buliwyf]

I am a qualified Kayfun Engineer now, just did my first build

[Roger]

Dec 13, 2014 17:11:34 GMT buliwyf said:

www.fasttech.com/p/1700500

I've got this Roger

Ty aliscampbell

That is the one I have as well.  You can use either the clear or metal middle section.  If you use the smaller sections above and below the middle then it is smaller (nano).  The bigger sections are normal (4.5ml) size.  The only problem I had was which top cap section would allow the longer top chimney to reach and seal.

[buliwyf]

You wouldn't have any links to pics would you roger please?

[Roger]

Dec 13, 2014 17:37:55 GMT buliwyf said:

You wouldn't have any links to pics would you roger please?

buliwyf  Only the ones on FT really.  www.fasttech.com/p/1700500

Picture 6 shows the two body makeups.  But you can substitute the clear tank for the metal one on the large setup.  When I do that I have to use the shorter top cap.

[aliscampbell]

Roger, I have just checked my kayfunlite box and have never used any of the smaller sections, I wonder if yours is an odd one

[buliwyf]

Now this is confusing me lol, so who's right ?