Smallest sub ohm tank

[Greg]

Feb 11, 2015 20:53:00 GMT djs said:

Feb 11, 2015 20:28:38 GMT Greg said:

@yavape there's an excellent riptrippers vid showing you how to make a 0.5ohm 5 wrap 0.4mm kanthal coil using only one of those wee blue screwdrivers to wrap around. It's one of the easiest rebuildables to as you don't need to wrap the tails around the screw heads due the innovative terminal design.

I'll dig out the vid and post the link for you. To make different resistance coils use the same approx 5 wraps but thinner wire, I've also used 0.3 kanthal for 1 ohm.

Wow. That rebuild looks a piece of cake.

I'm in.

Now, where do I purchase one of these bad boys?

Takes less than 5 minutes to coil and wick 
I got mine mine from vapeescape as I do with most things I buy in the UK.

[Perpetua]

Greg . . . just wondering if you'd be kind enough to rustle up a mini ' guide ' on a separate thread, with links to the equipment needed for rebuilding plus the video links.

I could then pop it on the Guide Board, given our current fascination with the Sub Tank it could be useful to have the info on a separate thread & easily found was my thinking.

Despite all the info being readily available, it is ever so handy to have it all pulled together in the one place.


A picture of your Atlantis collection wouldn't go amiss either.

[djs]

Feb 11, 2015 20:55:29 GMT Greg said:

Takes less than 5 minutes to coil and wick 
I got mine mine from vapeescape as I do with most things I buy in the UK.

One Q? (please...)

Is it quite a wide bore drip tip... can I put a slim one on it?

[Perpetua]

Feb 11, 2015 20:53:00 GMT djs said:

Wow. That rebuild looks a piece of cake.

I'm in.

Now, where do I purchase one of these bad boys?

You'll need 2 of course at least djs, so I'd suggest one from Jason:

www.vapeescape.co.uk/Vaping-Spares/Tanks-Accessories/Kanger-SubTank-Mini.Html

Then a back up from FT, which takes the authentic heads:

www.fasttech.com/products/2004306

[Greg]

Feb 11, 2015 21:01:18 GMT Perpetua said:

Greg . . . just wondering if you'd be kind enough to rustle up a mini ' guide ' on a separate thread, with links to the equipment needed for rebuilding plus the video links.

I could then pop it on the Guide Board, given our current fascination with the Sub Tank it could be useful to have the info on a separate thread & easily found was my thinking.

Despite all the info being readily available, it is ever so handy to have it all pulled together in the one place.


A picture of your Atlantis collection wouldn't go amiss either.

I'll try and knock something up tomorrow Perpetua although not sure if it will be any good as not done one before, but if you don't try 

You'll need need to speak to the Man from Atlantas (Tom) for the latter. Oh there's a custom title right there 

[Greg]

Feb 11, 2015 21:03:32 GMT djs said:

Feb 11, 2015 20:55:29 GMT Greg said:

Takes less than 5 minutes to coil and wick 
I got mine mine from vapeescape as I do with most things I buy in the UK.

One Q? (please...)

Is it quite a wide bore drip tip... can I put a slim one on it?

Yes and yes 

I find find them very airy but I like that, letsavit runs them as you infer so best to ask his opinion although I know he rates them.

[Perpetua]

Feb 11, 2015 21:11:37 GMT Greg said:

Feb 11, 2015 21:01:18 GMT Perpetua said:

Greg . . . just wondering if you'd be kind enough to rustle up a mini ' guide ' on a separate thread, with links to the equipment needed for rebuilding plus the video links.

I could then pop it on the Guide Board, given our current fascination with the Sub Tank it could be useful to have the info on a separate thread & easily found was my thinking.

Despite all the info being readily available, it is ever so handy to have it all pulled together in the one place.


A picture of your Atlantis collection wouldn't go amiss either.

I'll try and knock something up tomorrow Perpetua although not sure if it will be any good as not done one before, but if you don't try 

You'll need need to speak to the Man from Atlantas (Tom) for the latter. Oh there's a custom title right there 

That would be brilliant thank you Greg and Tom in anticipation.



We could also pop a link to your review thread on the Guide as well . . . .

[Deleted]

Feb 11, 2015 20:31:08 GMT Greg said:

@yavape couple of links for you

Omg I can do that yay now I'm on a winner thanks to everyone here I have my shopping list can't wait to have a go at this

[Tom]

Ive taken all of the pictures and rebuilt the subtank tonight for the guide...

If you want to do it anyway then feel free my friend

[Deleted]

Feb 11, 2015 21:19:30 GMT Tom said:

Ive taken all of the pictures and rebuilt the subtank tonight for the guide...

If you want to do it anyway then feel free my friend

Brilliant so I just click on the forum guides and I can read all that as well that's so helpfull

[Deleted]

Do I have to buy a torch to make the coils ?? And the 2..4 riod ??? Would I find these in a hardware shop

[Greg]

Feb 11, 2015 21:19:30 GMT Tom said:

Ive taken all of the pictures and rebuilt the subtank tonight for the guide...

If you want to do it anyway then feel free my friend

Tom feel free to crack on if you've started mate, I know you mentioned this last night. I'm happy either way and if you go for it then feel free to use anything I've posted already.

Alternatively I'll knock something up tomorrow, let me know I'm easy either way 

[Tom]

Feb 11, 2015 21:26:09 GMT Greg said:

Feb 11, 2015 21:19:30 GMT Tom said:

Ive taken all of the pictures and rebuilt the subtank tonight for the guide...

If you want to do it anyway then feel free my friend

Tom feel free to crack on if you've started mate, I know you mentioned this last night. I'm happy either way and if you go for it then feel free to use anything I've posted already.

Alternatively I'll knock something up tomorrow, let me know I'm easy either way 

I've done a guide for building it with a microcoil.

Will publish tomorrow, you want to make a guide for a spaced coil for it and we can join them?

[Greg]

Feb 11, 2015 21:24:53 GMT @yavape said:

Do I have to buy a torch to make the coils ?? And the 2..4 riod ??? Would I find these in a hardware shop

No need to torch as they are spaced wraps, ie they don't and shouldn't touch each other. I assume the rod you refer to is for positioning the coil in when rebuilding the stock head. A drill bit will be fine, if you don't have any take a spare head to the hardware store and ask them for a drill bit or Allen key that fits snugly in the holes.

[Perpetua]

Feb 11, 2015 21:19:30 GMT Tom said:

Ive taken all of the pictures and rebuilt the subtank tonight for the guide...

If you want to do it anyway then feel free my friend

Feb 11, 2015 21:26:09 GMT Greg said:

Feb 11, 2015 21:19:30 GMT Tom said:

Ive taken all of the pictures and rebuilt the subtank tonight for the guide...

If you want to do it anyway then feel free my friend

Tom feel free to crack on if you've started mate, I know you mentioned this last night. I'm happy either way and if you go for it then feel free to use anything I've posted already.

Alternatively I'll knock something up tomorrow, let me know I'm easy either way 

A ' collaboration ' would be great gents . . . we'd have the best of both worlds then.