Calling all you super wickers please :)

[Deleted]

Apr 5, 2015 9:50:37 GMT xs2man said:

Apr 5, 2015 9:17:54 GMT @yavape said:

I gosh yes what a empty head I even enlarged them lol that's about right for me

Good stuff.

I tend not to build my tanks any lower than 0.5 Ohm anyway, as that's the limit on my DNA30, and my 10A batteries won't go any lower than that either (although I would probably recommend 30A batteries for that resistance anyway as the 10A are right at their limits).  Any resistance lower than that gets lumped on a mech with VTC5's.  Usually in a dripper.

I have the Sony vtc4 so should be fine , Iv just checked to see what my cotton pads are to see why I like one better than the other,the ones I like are Japanese koh gen doe I find easier for some reason ,the other is muju

[phtumshk]

Apr 5, 2015 7:49:38 GMT Greg said:

Draining the Kayfun is the Second Best option, here's the first www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectPath=/Shops/yxve46fvrnud/Products/KAYFIL

seen that on ft and wondered what it was about  but over looked it but that is ingenious.

[Greg]

Apr 5, 2015 10:39:26 GMT phtumshk said:

Apr 5, 2015 7:49:38 GMT Greg said:

Draining the Kayfun is the Second Best option, here's the first www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectPath=/Shops/yxve46fvrnud/Products/KAYFIL

seen that on ft and wondered what it was about  but over looked it but that is ingenious.

I'm certainly not averse to ordering stuff from FT but I'd think machining tolerance is key to prevent leakage so the FT option may be a bit of a gamble in this instance although if it's only £2 or something maybe a gamble worth taking 

[phtumshk]

Apr 5, 2015 10:43:13 GMT Greg said:

Apr 5, 2015 10:39:26 GMT phtumshk said:

seen that on ft and wondered what it was about  but over looked it but that is ingenious.

I'm certainly not averse to ordering stuff from FT but I'd think machining tolerance is key to prevent leakage so the FT option may be a bit of a gamble in this instance although if it's only £2 or something maybe a gamble worth taking 

Now Ive actually seen how it works Ill be knocking 1 up out of bits from the knick knacks box lol.

[VapingBad]

I use a syringe to empty kayfuns, but you can just unscrew the base with it upside down over a mixing cup or aerosol lid the liquid comes out through the drip tip hole and is easy to aim into the cup.

[phtumshk]

Ive just spotted the flaw in the KFun fill tool, the cap Im using at the moment has a shoulder at the bottom of the drip tip well.
Just need to run a drill through it like i did with the others i have.

[Greg]

Apr 5, 2015 13:51:24 GMT phtumshk said:

Ive just spotted the flaw in the KFun fill tool, the cap Im using at the moment has a shoulder at the bottom of the drip tip well.
Just need to run a drill through it like i did with the others i have.

I guess they're made for the original atty so not really a flaw in itself.

[phtumshk]

Apr 5, 2015 14:06:21 GMT Greg said:

Apr 5, 2015 13:51:24 GMT phtumshk said:

Ive just spotted the flaw in the KFun fill tool, the cap Im using at the moment has a shoulder at the bottom of the drip tip well.
Just need to run a drill through it like i did with the others i have.

I guess they're made for the original atty so not really a flaw in itself.

Very true Greg.
I drilled mine out as you dont need to use the short chimney for the nano kit.
 
Any hoo, 4mm drill bit & 6mm copper pipe ghetto fill tool.
Works a treat, no more screw driver fidlin or leaky top cap filling.

[Deleted]

Hi I got the kaifun today I didn't have any rayon yet so I did it with the pads, I tuck my time and followed all your instructions, it's working great as of yet fingers crossed ,iv attached some pics so you can tell me if iv gone wrong ,thanks everyone

[VapingBad]

Looks good @yavape, I have the wick a little longer with that style to sit on deck for the width of the deck, but that was with cw balls where they needed to be thinner. If it vapes well that's all that matters and there is no need to go further, but if you want to get more of a feel you can try a little more and a little less to feel the effects.

[Deleted]

Apr 7, 2015 13:57:53 GMT VapingBad said:

Looks good @yavape, I have the wick a little longer with that style to sit on deck for the width of the deck, but that was with cw balls where they needed to be thinner. If it vapes well that's all that matters and there is no need to go further, but if you want to get more of a feel you can try a little more and a little less to feel the effects.

Hi I didn't like the juice as I used a nasty one to try it so I realised I had some c b and have used them making it sit how you have explained and it seems a lot better thanks

[Deleted]

VapingBad yep it's actually a lot better now ,I thought it was alright before but with the longer tails using the balls I'm getting loads more vaper so I'm going to do it your way thanks for the tip