Goblin vs Eleaf Lemo v2

[*-SARIN-*]

Right put your mark on the board guys.  Some of you have tried both, some only one but despair not, opinions are required!

[phatfil]

Its a close one with similar Total resistance coils fitted (1 x in the lemo 2 x in the goblin ) they both generate a similar flavour hit at the same power level..

but the lemo 2 wins out on ease of filling imho tho it is a bit more pop-py at higher power levels.

im torn between the 2 for my favorite atty..

you can open the lemo2 air intake more, so there is a bit more draw resistance with the goblin, but not much..

just my take..

[Get Off My Cloud]

Haven't tried the Goblin yet, no doubt will at some point and maybe it gives better flavour than the Lemo but it's going to have to be a dramatically better performance for me to relegate my Lemo's.
Aside from the great flavour i get from the Lemo i just love the simplicity of it, one coil to wrap,install and wick i could practically do it blindfold in under a minute.
I don't need to faff about trimming the wick just right snipping bits off here and there and styling the cotton like i'm a barber just one chop on either end push it down so it's resting on a flat deck drop some juice on the cotton put the tank together fill and away i go.
I would like Eleaf to come up with a design so the build is accessible without draining the tank though, that's about the only drawback i see at the moment.

[thatguy]

Umm, can't I vote for the kraken?

Seriously, both these attys are a major step up from the kayfail. Better wicking and you dont feel like your trying to suck a hippos butt through a straw.

[VapingBad]

May 16, 2015 2:17:18 GMT thatguy said:

Umm, can't I vote for the kraken?

Seriously, both these attys are a major step up from the kayfail. Better wicking and you dont feel like your trying to suck a hippos butt through a straw.

Origenny  Tease-smiley you are so 2014, seriously try one they under a tenner.

[geordie_vaper]

May 16, 2015 2:17:18 GMT thatguy said:

Umm, can't I vote for the kraken?

Seriously, both these attys are a major step up from the kayfail. Better wicking and you dont feel like your trying to suck a hippos butt through a straw.

kayfun i would say is the most popular atomizer out there or was for many years it was a bench mark for silica based atomizers, thats what people would say "whats it like compared to a kayfun"

kayfail... maybe its your building skills thats failed

[Deleted]

Lemo 2 wins hands down. The Goblin is too faffy, fiddly and the decks are too tiny which makes it leak at the drop of a hat.

[Deleted]

I cannot compare to the Lemo 2, but i far prefer the Goliath over the Goblin.

[poochops]

Lemo v2 by a country mile for me! I do like my goblin but the Lemo is just so simple and easy to build plus it's properly well made, the goblin was built to a price imo and it shows.

[*-SARIN-*]

May 16, 2015 7:58:44 GMT geordie_vaper said:

May 16, 2015 2:17:18 GMT thatguy said:

 "whats it like compared to a kayfun"

If i had to describe the lemo it would be a sub-ohm kayfun i think

[geordie_vaper]

i agree looking at its airflow and build deck, havent owned a lemo like but going off reviews and that

[bunglebear]

Goblin goblin goblin.....but Goliath over goblin

[Deleted]

I found the goblin a faff for all the reasons mentioned above, plus the posts made for a very efficient guillotine

Also mentioned is that the kayfun has rightly long been regarded as the benchmark other atties are judged by, but time moves on and with the advent of temp limiting devices and all the things that make for safe sub ohming it's been found wanting imo. Having said that it's wrong to label it 'Kayfail' because it does what it was originally designed to do extremely well.

I haven't used a lemo but if it's a sub-ohm kayfun as described, and it looks like it, then that would get my vote.

[Deleted]

May 17, 2015 14:55:27 GMT @scooby said:

I found the goblin a faff for all the reasons mentioned above, plus the posts made for a very efficient guillotine

Also mentioned is that the kayfun has rightly long been regarded as the benchmark other atties are judged by, but time moves on and with the advent of temp limiting devices and all the things that make for safe sub ohming it's been found wanting imo. Having said that it's wrong to label it 'Kayfail' because it does what it was originally designed to do extremely well.

I haven't used a lemo but if it's a sub-ohm kayfun as described, and it looks like it, then that would get my vote.

I haven't touched any other tank since getting the lemo 2. No leaks, easy build deck, side filling is the best idea yet and the range of airflow is perfect.