Guides & tutorial on temperature control needed

[robby]

"YiHi's like the IPV & SX scorch at these temps, I used to think it was just different calibration by have read quite a few threads about them only adjusting the temp twice a second so it may just be a larger swing in temperature that causes it and the pulse frequency modulation on the output would just make that effect worse." VapingBad

[VapingBad]

Jul 6, 2015 12:00:57 GMT robby said:

"YiHi's like the IPV & SX scorch at these temps, I used to think it was just different calibration by have read quite a few threads about them only adjusting the temp twice a second so it may just be a larger swing in temperature that causes it and the pulse frequency modulation on the output would just make that effect worse." VapingBad

lol

[robby]

lol? My IPV4 does not scorch once I find the proper reference/calibration/burning point and stick to it.

[mxethey]

Jul 6, 2015 15:29:16 GMT robby said:

lol? My IPV4 does not scorch once I find the proper reference/calibration/burning point and stick to it.

So robby is that case no matter what you set the wattage to.

[robby]

Jul 6, 2015 18:13:55 GMT mxethey said:

Jul 6, 2015 15:29:16 GMT robby said:

lol? My IPV4 does not scorch once I find the proper reference/calibration/burning point and stick to it.

So robby is that case no matter what you set the wattage to.

Yes, the wattage you set the device to is independant of the temperature setting for the wick burning. Maybe start 30F below what the burn char test tells you and work your way up The liquid is acting like a coolant on the coil, so when it starts to dry up, the cooling decreases and the coil temp goes up. Then it starts regulating/protecting/controlling

[VapingBad]

Jul 6, 2015 11:14:33 GMT robby said:

It`s about 460F ish on the DNA40 and the Kangxin, but it`s a good bit lower on the IPV4. Still works perfectly for me, just a different reference to use. They aren`t all the same, although of course they should be. But like I said, it still works the same with a different reference point.

The OP asked us to stick to the question, but you don't seem to want to. You said here that the IPV temperatures were different, need to set the temp limit lower, then you change your mind that's why lol You did the same thing about needing special wicking. Apologies if I read it wrong, I can do that sometimes, but that's what I understood anyway.

I suggest we dope this childish bickering it is not helping anyone.

[Deleted]

I've found with TC I get loads of mist in my mouth, 510-520 on 25 w it's OK anything below that I hate it. Dunno why but it's the same on both my tc mods. I've yet to work it out so throwing it out here to see ideas Thanks

[jeffc]

Is it my imagination (what little I have left), but I am sure that with these `nickel` coils I can taste a change in my normal juices.

Operating at 450F @ 15 watts using a coil of Ni200, checked at 0.12ohms. Cotton (Jap) wick.

Is it me or do other have same results ?

[robby]

Jul 6, 2015 18:41:30 GMT VapingBad said:

Jul 6, 2015 11:14:33 GMT robby said:

It`s about 460F ish on the DNA40 and the Kangxin, but it`s a good bit lower on the IPV4. Still works perfectly for me, just a different reference to use. They aren`t all the same, although of course they should be. But like I said, it still works the same with a different reference point.

The OP asked us to stick to the question, but you don't seem to want to. You said here that the IPV temperatures were different, need to set the temp limit lower, then you change your mind that's why lol You did the same thing about needing special wicking. Apologies if I read it wrong, I can do that sometimes, but that's what I understood anyway.

I suggest we dope this childish bickering it is not helping anyone.

Obviously what I meant was that the IPV4 read and displayed the temeratures differently, even though it was bound to be the same actual temperature. I didn`t change my mind at all. Didn`t mention "special" wicking, just efficient wicking, two  different things entirely. You are the one who is bickering here. 

[robby]

Now you can believe it or not, but the top post on this page had more than what is showing there. I cant remember exactly what I posted there, but there was more than what is showing VapingBad.

[mxethey]

ooooooooooooh drama, here's one to battle out
Best subtank build
Best rta build
best rda dual coil build
with all the details

answers on a postcard please

[Deleted]

Jul 6, 2015 18:56:09 GMT @tedster said:

I've found with TC I get loads of mist in my mouth, 510-520 on 25 w it's OK anything below that I hate it. Dunno why but it's the same on both my tc mods. I've yet to work it out so throwing it out here to see ideas Thanks

Is it the high power that is pushed through the coil at pre heat is causing the juice to vaporise rapidly and sending a mist of juice up with it? Bit like the spatter you get pouring water into a very hot pan. 

[Deleted]

Jul 6, 2015 19:34:54 GMT robby said:

Now you can believe it or not, but the top post on this page had more than what is showing there. I cant remember exactly what I posted there, but there was more than what is showing VapingBad.

I don't think so robby but I feel it's best to call it 6 one and 1/2 doz of the other and do as VapingBad said because it's not good to have two long standing and respected members who have a lot offer the rest of us bickering.

[Deleted]

Jul 6, 2015 20:53:24 GMT @scooby said:

Jul 6, 2015 18:56:09 GMT @tedster said:

I've found with TC I get loads of mist in my mouth, 510-520 on 25 w it's OK anything below that I hate it. Dunno why but it's the same on both my tc mods. I've yet to work it out so throwing it out here to see ideas Thanks

Is it the high power that is pushed through the coil at pre heat is causing the juice to vaporise rapidly and sending a mist of juice up with it? Bit like the spatter you get pouring water into a very hot pan. 

It's constant mate, until I up it to 510-520 then seems to be ok, it never reaches that temp anyway, the max I've seen it go is around the 390 mark. It's all a mystery to me maybe why I'm still not sold on it

[Deleted]

That's weird @tedster never heard of anything like that, it'll be interesting to see if anyone else has experience it.