Sub-tank help please.

[Pacer]

Ok so it came today the Nano but it's warm the vape from it.

I haven't used anything like this before but had a read and have set the I 30 to 5.8w 2,0 V but it's still a hot vape. Using one of the heads that came in the box think it say's 0.5.

Any advice please, if not looks like the Davide it is and the Nano it just not for me.

[Perpetua]

Open up the airflow, up the watts . . . try a mouth to lung inhale, with a low low strength eliquid Pacer.

[MrDJ]

not got the nano but the mini on 0.5 coil is good at 20-22watts for me. as said open the air holes to max.
what strength nicotine are you using. 3 or 6mg max is best.

[Pacer]

Aug 4, 2015 20:25:43 GMT Perpetua said:

Open up the airflow, up the watts . . . try a mouth to lung inhale, with a low low strength eliquid Pacer.

Ok thanks Perpetua will give that a go.

[Pacer]

Aug 4, 2015 20:30:08 GMT MrDJ said:

not got the nano but the mini on 0.5 coil is good at 20-22watts for me. as said open the air holes to max.
what strength nicotine are you using. 3 or 6mg max is best.

3mg MrDJ

[Pacer]

My goodness where is the TV? Opened the air-flow thingy and set to 20W and now the room is full of vapor and I mean full Still a little warm but maybe something I will need to get use too .

[Greg]

Pacer, assume you've thouroughly juiced up the wick in the Subtank first. It's cotton wool in the OCC heads so you must thouroughly wet them first.

More airflow will also help as above. If the drip tip is getting hot have you ant non metal DT's to try ?

I'm not sure what you mean by 5.8 watts and 2 volts, you can't be at both these values at the same time with a 0.5 ohm call. What mod are you using it on, ideally you should be running the 0.5 head at somewhere between 15 and 25 watts.

[Greg]

Aug 4, 2015 20:36:43 GMT Pacer said:

My goodness where is the TV? Opened the air-flow thingy and set to 20W and now the room is full of vapor and I mean full Still a little warm but maybe something I will need to get use too .

Sounds like your moving int he right direction now 

[Gary Horder]

I know the feeling...had to urgently open car window other day as had vaped my passenger into submission lol

[MrDJ]

Aug 4, 2015 20:31:45 GMT Pacer said:

Aug 4, 2015 20:30:08 GMT MrDJ said:

not got the nano but the mini on 0.5 coil is good at 20-22watts for me. as said open the air holes to max.
what strength nicotine are you using. 3 or 6mg max is best.

3mg MrDJ

you know what i meant

[Pacer]

Aug 4, 2015 20:57:23 GMT MrDJ said:

Aug 4, 2015 20:31:45 GMT Pacer said:

3mg MrDJ

you know what i meant

Yes MrDJ I did know what you meant I was just replying I use 0.3 mg at 70-30 VG

[buggritt]

Aug 4, 2015 20:30:08 GMT MrDJ said:

not got the nano but the mini on 0.5 coil is good at 20-22watts for me. as said open the air holes to max.
what strength nicotine are you using. 3 or 6mg max is best.

The nicotine level doesn't make it hotter. The mini at 30 watts. smallest airhole, and 24 mg are my preference. Hot - you get used to it. Flavour is great.
Everyone is different.

[Pacer]

Aug 4, 2015 20:38:40 GMT Greg said:

Pacer, assume you've thouroughly juiced up the wick in the Subtank first. It's cotton wool in the OCC heads so you must thouroughly wet them first.

More airflow will also help as above. If the drip tip is getting hot have you ant non metal DT's to try ?

I'm not sure what you mean by 5.8 watts and 2 volts, you can't be at both these values at the same time with a 0.5 ohm call. What mod are you using it on, ideally you should be running the 0.5 head at somewhere between 15 and 25 watts.

Greg using it on a Istick 30 readings are 5.7 W & 2.0 V (Edit) No mate don't have any other tips maybe something I need to have a look for.

[Greg]

Aug 4, 2015 21:08:09 GMT Pacer said:

Aug 4, 2015 20:38:40 GMT Greg said:

Pacer, assume you've thouroughly juiced up the wick in the Subtank first. It's cotton wool in the OCC heads so you must thouroughly wet them first.

More airflow will also help as above. If the drip tip is getting hot have you ant non metal DT's to try ?

I'm not sure what you mean by 5.8 watts and 2 volts, you can't be at both these values at the same time with a 0.5 ohm call. What mod are you using it on, ideally you should be running the 0.5 head at somewhere between 15 and 25 watts.

Greg using it on a Istick 30 readings are 5.7 W & 2.0 V (Edit) No mate don't have any other tips maybe something I need to have a look for.

Ah ive got it. So you've set it to 5.7watts and when it fires it's telling you it's outputting 2volts. The istick minimum output is 2volts and with a 0.5 ohm coil fitted your actually Vaping at 8 watts even though you've set it at 5.7 watts.

Not really relevant now since your at 20 watts 

[TJ]

I change drip tips from metal to silicon, rubber or plastic, think I have a delrin one as well as I'm not keen on hot tips