Cracking cheap mod

[smarties]

Yep I was sort of hoping that wouldn't be the answer, works fine but a big gap and a wobbly tank

[DiscoDes]

May 3, 2016 15:37:47 GMT smarties said:

Got one of these today and a very nice mod they are too, the only thing is the gap between the mod and atty is pretty huge, anyone else had this or can suggest a fix?

You can use a "redacted washer" from Stealthvapes >HERE<

[Postmodern Smoking]

smarties... my velocity clone sits flush on mine.
Not sure if anti-scratch 510 washers would help you (to put between mod & atomiser), or whether it's ticket raising time. (I assume that your atomiser is flush on other mods?)

[Perpetua]

May 3, 2016 12:04:14 GMT jacey said:

May 2, 2016 13:28:18 GMT Perpetua said:

Any sub-ohm coil, then you'll need 20 watts and over to vaporize your eliquid properly jacey , otherwise you'll find yourself with gurgles and leakage.

You could always try something like this:

www.fasttech.com/products/0/10012000/2515000-subtank-mini-styled-bell-cap-clearomizer

With the RBA deck, then it can take whatever ohms you'd like to put in it  . . . . I've had several of these and although it says ' styled ' they've all come with an original Kangertech deck.

www.fasttech.com/products/0/10014112/2390700-authentic-kangertech-subtank-mini-rba-plus-coil

Thanks for all replies, do these two fit together ie clearomiser and kangertech-subtank-mini-rba-plus-coil or do I just need the subtank-mini-styled-bell-cap-clearomizer

[which one do I fit the coil into ]
Sorry if that is not clear but I did say I was a bit scatty

The first link is a complete unit jacey with the rebuildable deck included . . . . which will hopefully be an original Kangertech one. Although that's not a guarantee as Fasttech term it as ' styled '.

The second link was to show you what the original/rebuildable part looks like - have you tackled winding or installing new coils as yet?

[gill2009]

  I don't have a gap either smarties...something isn't right 

[Lee]

Clear Atty Gasket will solve it
www.stealthvape.co.uk/rebuildable-supplies/clear-atty-gaskets

[TJ]

I have a gap on mine with some tanks smarties so I have some of the stainless steel ones linked above from stealthvape and I have the silicon ones as well for other mods.

[nanotm]

I have the same problem with a kanger subtank I ordered from FT, it sits proud on all of my mods, yet the other 3 subtanks I have don't have the same problem (all from GB)

I rather suspect the afc's are made with the thread a few mils longer ready for sale in a different market, its an old trick that companies used to use a lot to prevent people buying stuff in one country and getting for half the price there shops charging in another (making it not fit) so whilst were buying cheap product from china (where its made) it might have been the "wrong pallet of goods" there flogging ....

anyhow its easy to fix with an adaptor or a heat sink or a washer

[smarties]

That's a really good thought that nanotm it's a genuine afc base that stands proud think I'll try a clone as I seem to remember they are slightly shorter.



Edit Yep you were right clone fits perfectly

[anon4]

I find the joyetech mods have a stiff spring and not the deepest 510. I've screwed atties tight to make them flush, it loosens over time. Not sure if it affects longevity but I never had an issue

[smarties]

Yes you're right anon4 it does seem to be loosening up slowly

[digiw0rx]

What’s new in Version 3.03?
Game Mode
We added the new Game Mode on Version 3.03 in order to bring more fun to you.
Simply press the fire button and right regulatory button simultaneously to enter into the menu regulation interface1. Then press the right regulatory button again to enter into the Game Mode menu2 directly. Choose Easy, Normal or Hard level and press the fire button to start the game. Press the fire button and right regulatory button simultaneously to exit.


they added flappy bird to the official firmware

[anon4]

May 4, 2016 14:40:45 GMT smarties said:

Yes you're right anon4 it does seem to be loosening up slowly

Just watch you don't mush your insulator

[Clivia]

hi Greg and all the others

just got mine - on which temperature do I need to set it , if I don't vape temperature controlled atties or coils - use the 'normal' kanger subox minis

thanks

[Postmodern Smoking]

May 5, 2016 16:48:06 GMT Clivia said:

hi Greg and all the others

just got mine - on which temperature do I need to set it , if I don't vape temperature controlled atties or coils - use the 'normal' kanger subox minis

thanks

If using "normal" (non TC coils) you use the VTC in Power mode where you set the watts not the temperature.