RBAs coils and cotton

[c1booth]

hi I'm thinking of getting the bra deck for my baby beast to save on store coils
I've looked into it and I'm a little lost 
the only experience I have is rebuilding some protank coils 
for this I bought kanthel .25 and .3 and some cotton sheets (not sure on type)
now I'm looking around and theres Clapton, fused, twisted, alien etc etc 

can anyone help please 
I'm unsure what I need for the rba and even if I should just buy ready made coils or wire or were is best to get the deck from 

im also looking at getting more attys too so I can have a few flavours on the go
cheap as possible and they would need to be rebuildable as I don't want to be buying store coils for different brands of attys
recommendations very much welcome as I'm out the loop of whats out there good an bad
 
thanks 

[thebishman]

Jan 2, 2017 18:37:51 GMT c1booth said:

hi I'm thinking of getting the bra deck for my baby beast to save on store coils
I've looked into it and I'm a little lost 
the only experience I have is rebuilding some protank coils 
for this I bought kanthel .25 and .3 and some cotton sheets (not sure on type)
now I'm looking around and theres Clapton, fused, twisted, alien etc etc 

can anyone help please 
I'm unsure what I need for the rba and even if I should just buy ready made coils or wire or were is best to get the deck from 

im also looking at getting more attys too so I can have a few flavours on the go
cheap as possible and they would need to be rebuildable as I don't want to be buying store coils for different brands of attys
recommendations very much welcome as I'm out the loop of whats out there good an bad
 
thanks 

What mod are you using it on?

I run mine with dual 3mm coils with 26 gauge wire. With my fav wicking material...koh gen doh cotton. Its a great rba..plenty of flavour and clouds

[c1booth]

Jan 2, 2017 18:44:44 GMT thebishman said:

Jan 2, 2017 18:37:51 GMT c1booth said:

hi I'm thinking of getting the bra deck for my baby beast to save on store coils
I've looked into it and I'm a little lost 
the only experience I have is rebuilding some protank coils 
for this I bought kanthel .25 and .3 and some cotton sheets (not sure on type)
now I'm looking around and theres Clapton, fused, twisted, alien etc etc 

can anyone help please 
I'm unsure what I need for the rba and even if I should just buy ready made coils or wire or were is best to get the deck from 

im also looking at getting more attys too so I can have a few flavours on the go
cheap as possible and they would need to be rebuildable as I don't want to be buying store coils for different brands of attys
recommendations very much welcome as I'm out the loop of whats out there good an bad
 
thanks 

What mod are you using it on?

I run mine with dual 3mm coils with 26 gauge wire. With my fav wicking material...koh gen doh cotton. Its a great rba..plenty of flavour and clouds

on the alien it came with
its all I have at the minute 
just got back to vaping and bought this kit 

[Perpetua]

Jan 2, 2017 18:37:51 GMT c1booth said:

hi I'm thinking of getting the bra deck for my baby beast to save on store coils

Now those I can advise on!!

More useful advice I'll leave to the coiling guru's . . . . . . .

[c1booth]

Jan 2, 2017 18:46:33 GMT Perpetua said:

Jan 2, 2017 18:37:51 GMT c1booth said:

hi I'm thinking of getting the bra deck for my baby beast to save on store coils

Now those I can advise on!!

More useful advice I'll leave to the coiling guru's . . . . . . .

just seen that typo

[Perpetua]

Jan 2, 2017 18:47:25 GMT c1booth said:

Jan 2, 2017 18:46:33 GMT Perpetua said:

Now those I can advise on!!

More useful advice I'll leave to the coiling guru's . . . . . . .

just seen that typo

Polygees Chris . . . . it did make me chuckle at the thought of you coiling up a bra.

I'll leave your thread in peace now.

[VapingBad]

With the gauges you have I would twist some 0.25, just double a section, loose ends in the drill chuck, loop the middle over something stable like a coat hook, put some tension on it by pulling the drill toward you, run the drill to twist and reverse a little before you take the tension off. chykensa uses a sauce pan rather than get the drill out of the shed, I think the holds the ends in pliers, loops thru the handle and spins the pan.

[c1booth]

Jan 2, 2017 19:02:05 GMT VapingBad said:

With the gauges you have I would twist some 0.25, just double a section, loose ends in the drill chuck, loop the middle over something stable like a coat hook, put some tension on it by pulling the drill toward you, run the drill to twist and reverse a little before you take the tension off. chykensa uses a sauce pan rather than get the drill out of the shed, I think the holds the ends in pliers, loops thru the handle and spins the pan.

so you have to twist your own not buy it twisted 
this vaping lark got massively complicated since I was last here with my stick and protank
hahaha

[sydsut]

Jan 2, 2017 19:04:33 GMT c1booth said:

Jan 2, 2017 19:02:05 GMT VapingBad said:

With the gauges you have I would twist some 0.25, just double a section, loose ends in the drill chuck, loop the middle over something stable like a coat hook, put some tension on it by pulling the drill toward you, run the drill to twist and reverse a little before you take the tension off. chykensa uses a sauce pan rather than get the drill out of the shed, I think the holds the ends in pliers, loops thru the handle and spins the pan.

so you have to twist your own not buy it twisted 
this vaping lark got massively complicated since I was last here with my stick and protank
hahaha

No you can get the wires pre-twisted from all over the net, just use search and see what comes up, this is what I got at Ebay for twisted wire in collectables. This is refined further Tobacianno & Smoking supplies

[c1booth]

Jan 2, 2017 19:22:44 GMT sydsut said:

Jan 2, 2017 19:04:33 GMT c1booth said:

so you have to twist your own not buy it twisted 
this vaping lark got massively complicated since I was last here with my stick and protank
hahaha

No you can get the wires pre-twisted from all over the net, just use search and see what comes up, this is what I got at Ebay for twisted wire in collectables

its the difference in the different types of coils that confusing me and what if im meant to use a certain type in this device or personal choice

[thebishman]

Jan 2, 2017 19:25:53 GMT c1booth said:

Jan 2, 2017 19:22:44 GMT sydsut said:

No you can get the wires pre-twisted from all over the net, just use search and see what comes up, this is what I got at Ebay for twisted wire in collectables

its the difference in the different types of coils that confusing me and what if im meant to use a certain type in this device or personal choice

You really dont have to go all fancy with the coils. Especially at the start. Just get some 0.3mm and 0.4mm wire and experiment. The alien mod has built in protection so you can really go wrong.

Download vapers toolbox app and input what ohms you want and what wire etc and it will work it out for you.

[c1booth]

Jan 2, 2017 19:35:18 GMT thebishman said:

Jan 2, 2017 19:25:53 GMT c1booth said:

its the difference in the different types of coils that confusing me and what if im meant to use a certain type in this device or personal choice

You really dont have to go all fancy with the coils. Especially at the start. Just get some 0.3mm and 0.4mm wire and experiment. The alien mod has built in protection so you can really go wrong.

Download vapers toolbox app and input what ohms you want and what wire etc and it will work it out for you.

as usual not available on my device
dont know why I use iOS at times

[decoy]

you can fit any type of coil you want in to the bra

to get closer to the shop coils you could do with some thicker wire like .4 or .5 mm
this will keep the ohms low whilst allowing you to build big nuff coils

twisted,clapton ect are just diff ways of using more than one wire to get bigger surface aria for supposed better vape
twisted is dead easy to make at home and claptons are manageable with some practise(a drill and cat locked outa room helps)

to twist the wire a pan and pen is all you need
cut 3 foot length of wire and feed it throw pan handle then twist the 2 ends together
put pen throw the hoop of wire with the join above pen and pan at bottom
hold aloft and spin the pan
keep doing it till the wire looks like rope
cut the wire were it passes throw pan handle and you now have some twisted wire

watch yet toes as the wire can snap unexpectedly

hope that helps

[thebishman]

Jan 2, 2017 19:41:49 GMT c1booth said:

Jan 2, 2017 19:35:18 GMT thebishman said:

You really dont have to go all fancy with the coils. Especially at the start. Just get some 0.3mm and 0.4mm wire and experiment. The alien mod has built in protection so you can really go wrong.

Download vapers toolbox app and input what ohms you want and what wire etc and it will work it out for you.

as usual not available on my device
dont know why I use iOS at times

There will be apps ypu can download im sure of it. Or websites can do the same

[c1booth]

think ill order the rba from fast tech
has anyone any recommendations of other attys from there that are good and easy to build on
need to build a bit of a collection so I can have a few liquids on the go easier
don't want to be spending a couple of hundred if I could help it though

been checking for sale section here but don't really know whats what with some of the tanks for sale