mikemichelle
Full Member
Joined:December 2014
Posts: 194
Location:
Likes: 128
Recent Posts
Last Online Nov 8, 2020 17:28:35 GMT
|
Post by mikemichelle on Dec 30, 2017 12:32:11 GMT
Hi guys
My current set-up is a Kanger EMOW on top of an eLeaf iStick 20w. I really like this set-up apart from the fact that the coils are so tiny and not easily rebuildable (for me). I quite like the size/dimensions of this set-up but really want a "proper" rebuildable with a single coil. I don't like large mods and am looking for something similar in size but probably a bit larger to what I have now. Any suggestions or advice will be gratefully received.
Thanks in advance.
ps I don't want a dripper (RDA)
|
|
Richard46
Super Member
Joined:September 2014
Posts: 756
Location:
Likes: 865
Recent Posts
Last Online Jul 30, 2024 12:27:45 GMT
|
Post by Richard46 on Dec 30, 2017 14:18:29 GMT
mikemichelle Just for starters and to bump your thread can I suggest that 22m is the smallest atty that is going to give you a relatively easy build deck? At that size and single coil one of the doggy style RTAs might be a suggestion. Never used one myself. At 24mm the Vandy Vape Berserker perhaps? Again I have no experience of these tanks but others on here may have and may have better suggestions.
|
|
phtumshk
Super Member
Joined:May 2014
Posts: 3,758
Location:
Likes: 4,058
Recent Posts
Last Online Nov 15, 2024 13:54:05 GMT
|
Post by phtumshk on Dec 30, 2017 14:59:00 GMT
mikemichelle Just for starters and to bump your thread can I suggest that 22m is the smallest atty that is going to give you a relatively easy build deck? At that size and single coil one of the doggy style RTAs might be a suggestion. Never used one myself. At 24mm the Vandy Vape Berserker perhaps? Again I have no experience of these tanks but others on here may have and may have better suggestions. Ive got a doggy and though not my choice for best RTA it is dirt cheap, very easy to build/wick, easy fill up able and is a really nice vape. Definitely a contender. FT_DOGGYIf you want a similar RTA to the doggy but a larger capacity and even easier to fill the digiflavour siren Not tried the V2 but the V1 is very good. DIGIFLAVOR_SIRENEDIT: the DF siren might be a bit big for an istick. Doggy looks proper dandy on it tho,
|
|
mikemichelle
Full Member
Joined:December 2014
Posts: 194
Location:
Likes: 128
Recent Posts
Last Online Nov 8, 2020 17:28:35 GMT
|
Post by mikemichelle on Dec 30, 2017 15:38:55 GMT
Thanks for the replies guys. I'll check 'em out!
|
|
decoy
Super Member
Joined:February 2014
Posts: 4,119
Location:
Likes: 3,118
Recent Posts
Last Online Apr 1, 2023 20:12:03 GMT
|
Post by decoy on Dec 30, 2017 15:48:31 GMT
kayfun v3 is defo worth a look as its relatively easy to rebuild and only 19mm wide so can be used on some of the smaller batts
|
|
mikemichelle
Full Member
Joined:December 2014
Posts: 194
Location:
Likes: 128
Recent Posts
Last Online Nov 8, 2020 17:28:35 GMT
|
Post by mikemichelle on Dec 30, 2017 16:53:04 GMT
kayfun v3 is defo worth a look as its relatively easy to rebuild and only 19mm wide so can be used on some of the smaller batts Thanks decoy that's the smaller, slimmer look I'm after. Just gone top of my list so far!
|
|
Get Off My Cloud
Super Member
Master of Hardware
Formerly dr00g
Joined:December 2014
Posts: 5,693
Location:
Likes: 7,691
Recent Posts
Last Online Jan 8, 2021 22:17:08 GMT
|
Post by Get Off My Cloud on Dec 30, 2017 16:54:03 GMT
Kayfun V5 Mini clone. LINKFoolproof to install coils and wick. I would recommend using 26AWG Kanthal A1 for your coils as it's thick enough to be easy to work with but also thin enough to get the resistance you need with a reasonable number of wraps. LINK use the dropdown menu to select the correct gauge and spool size you want. The minimum resistance coil the iStick 20W will fire is 1.0ohm, 8 or 9 wraps on a 2.5mm coiling rod should make a coil of 1.0ohm to 1.2ohm. This video is for the full size version but it's identical to the mini the only difference is the mini is a little shorter, the build deck, airflow and everything else is the same. If you don't want to watch the whole video skip to around 12.30 and you'll see how to install the coil and wick it.
|
|
thebishman
Super Member
Joined:January 2016
Posts: 6,683
Location:
Likes: 4,685
Recent Posts
Last Online Apr 2, 2016 14:39:37 GMT
|
Post by thebishman on Dec 30, 2017 17:03:05 GMT
Ive got a mint kayfun 3 and 5 gathering dust as i only squonk these days. Shoot me a pm if you would like em for peanuts
|
|
Richard46
Super Member
Joined:September 2014
Posts: 756
Location:
Likes: 865
Recent Posts
Last Online Jul 30, 2024 12:27:45 GMT
|
Post by Richard46 on Dec 30, 2017 17:24:02 GMT
mikemichelle If you are going to be using Kanthal I have some lengths of 32AWG 28AWG and 26AWG for you to experiment with just PM me. I only use Stainless Steel now so it is going to waste.
|
|
mikemichelle
Full Member
Joined:December 2014
Posts: 194
Location:
Likes: 128
Recent Posts
Last Online Nov 8, 2020 17:28:35 GMT
|
Post by mikemichelle on Dec 30, 2017 17:31:31 GMT
Kayfun V5 Mini clone. LINKFoolproof to install coils and wick. I would recommend using 26AWG Kanthal A1 for your coils as it's thick enough to be easy to work with but also thin enough to get the resistance you need with a reasonable number of wraps. LINK use the dropdown menu to select the correct gauge and spool size you want. The minimum resistance coil the iStick 20W will fire is 1.0ohm, 8 or 9 wraps on a 2.5mm coiling rod should make a coil of 1.0ohm to 1.2ohm. This video is for the full size version but it's identical to the mini the only difference is the mini is a little shorter, the build deck, airflow and everything else is the same. If you don't want to watch the whole video skip to around 12.30 and you'll see how to install the coil and wick it. Thank you so much Get Off My Cloud that is really helpful!
|
|
mikemichelle
Full Member
Joined:December 2014
Posts: 194
Location:
Likes: 128
Recent Posts
Last Online Nov 8, 2020 17:28:35 GMT
|
Post by mikemichelle on Dec 30, 2017 17:34:39 GMT
mikemichelle If you are going to be using Kanthal I have some lengths of 32AWG 28AWG and 26AWG for you to experiment with just PM me. I only use Stainless Steel now so it is going to waste. Thanks Richard46 but I already have got loads of wire and stuff. I'm only lacking the actual tank but thanks once again.
|
|
mikemichelle
Full Member
Joined:December 2014
Posts: 194
Location:
Likes: 128
Recent Posts
Last Online Nov 8, 2020 17:28:35 GMT
|
Post by mikemichelle on Dec 30, 2017 18:45:25 GMT
Well, thanks to all the wonderful help on this forum I've got my order in for my tanks. However, I feel I need to upgrade my battery. Once again, any advice and recommendations would be very gratefully received. Thanks in advance. What's the next step up from my Eleaf iStick 20w?
|
|
thebishman
Super Member
Joined:January 2016
Posts: 6,683
Location:
Likes: 4,685
Recent Posts
Last Online Apr 2, 2016 14:39:37 GMT
|
Post by thebishman on Dec 30, 2017 18:49:02 GMT
Well, thanks to all the wonderful help on this forum I've got my order in for my tanks. However, I feel I need to upgrade my battery. Once again, any advice and recommendations would be very gratefully received. Thanks in advance. What's the next step up from my Eleaf iStick 20w? The eleaf pico is a great small mod. But it has the benefit of a replaceable battery unlike the istick. Can be picked up cheap enough
|
|
|
Post by Perpetua on Dec 30, 2017 19:15:23 GMT
|
|
Get Off My Cloud
Super Member
Master of Hardware
Formerly dr00g
Joined:December 2014
Posts: 5,693
Location:
Likes: 7,691
Recent Posts
Last Online Jan 8, 2021 22:17:08 GMT
|
Post by Get Off My Cloud on Dec 30, 2017 19:32:28 GMT
Mod with built in battery if you prefer. Has a 2500mAh battery inside so should give you very decent battery life between charges, the iStick 20W has a 2200mAh battery. Aspire Zelos £29.99 linkUse code POTV15 at checkout for a 15% discount.
|
|