Recent Posts

do it do pre heat and that software thingy

or more to the point what do the 200 board do that this don't apart from the watts

thanks

you can tell by it not reading the right ohmage
they can work but still short
if your using a mech then yep it could do bad things
you can get a metallic taste/smell
and you can get hot spots that you can norm get rid off by pulseing

you have fused part of it because you did not prep the mesh well nuff and it made a dead short in the tank.The main prob with mesh is not nocking off the coating you have built up on it when fitting it

tbh I don't have a nextiny but have had genny type attys
the main thing is to burn de fook outa the mesh before you fit it as you have to build up a layer of carbon to act as an insulator
I tend to roll it to size and cover it in juice before hitting it with blowtorch to make it glow red hot
I tend to do that 3 or 4 times before fitting the mesh
just try to get the mesh black before use or it tends to short

I think I may have cracked it


Put some .5 Clapton wire in (remember to strip the legs or it rips insulator)
Wicked it using Scottish roll method and it's keeping up at 65 watts

can I ask what's better for max vg juice because when ive messed with mesh I had to put cotton in it to help with wicking when using a ud genny type tank
I got a mini chells clone atty and have seen vids of them using mesh and it seems a good idea because wicking that little sucker with cotton is hard work, its a 16mm tank for micro stick and is ruddy good when /if wicked right