|
|
Post by goneforagasper on Nov 21, 2017 11:02:04 GMT
I'm guessing you have found a Kayfun Prime Tom, I know you are a Kayfun expert and wonder if you would share the build which you have gone with. I have tried several different builds and am not satisfied with the flavour with any of them. Any advice would be gratefully received. Peter
|
|
|
|
Post by goneforagasper on Nov 10, 2017 8:58:10 GMT
 Following my receipt of the new SXK Kayfun Prime I put it through its paces specifically comparing it to previous Kayfuns with the emphasis on flavour. I am MTL vaper 70/30 pg/vg 6mg nicotine. I have 8 liquids on the go at any one time in rotation simply because that suits me and has replaced my 30 Marlboro habit. Builds are Kanthal 0.8 – 1.3 ohms 12w – 15w . The 2 SXK clones are well engineered, easy to build if you are used to the Mini V3 and did not smell of machine oil, but I gave them a good wash anyway. Vapes very smoothly but I found the flavour to be not as good as the Mini V3, which to me is the most flavoursome of all the Kayfun family. So where does it sit with my other Kayfuns :- Equal to Kayfun Lite with bell cap, not as good as KFL with Steam Tuners “Tiny” tank but well behind the Mini V3. Conclusion – I was looking forward to the Prime, thinking same flavour as V3, 22mm configuration absolute winner, but I am disappointed simply because the flavour is not good enough. |
|
|
|
Post by goneforagasper on Nov 9, 2017 20:49:23 GMT
 This shows beauty ring in action |
|
|
|
Post by goneforagasper on Nov 9, 2017 20:18:55 GMT
It's worth mentioning that this has the beauty ring so it fits nicely on a 22mm tube mod
|
|
|
|
Post by goneforagasper on Nov 5, 2017 17:37:34 GMT
|
|
|
|
Post by goneforagasper on Nov 5, 2017 17:32:48 GMT
domesticextremist Kayfun Mini V3, Kayfun Lite and a number of spares are back under the brand KF
|
|
|
|
Post by goneforagasper on Nov 5, 2017 17:28:48 GMT
From FT 2 SXK Kayfun Prime Pre-ordered these a couple of weeks ago and they have now been shipped, I only vape Kayfuns and if these are as good for flavour as the Mini V3 I will follow this order up with another. I have high hopes that the Prime will be good for flavour with the 22mm configuration which I prefer I wemt to FT's site to look at this and noted that all items labelled "Kayfun" havw disappeared. They only have a few things listed under KF (Prime, Mini V3 and a very few spares). Their vast range of spares and clones seem to no longer be available, which is a bummer. I think they have had a legal pull by Svoemesto and they disappeared from the site for a couple of days. They then re-appeared under the title KF could be that everything comes back with a new name eventually. |
|
|
|
Post by goneforagasper on Nov 5, 2017 15:23:47 GMT
From FT
2 SXK Kayfun Prime
Pre-ordered these a couple of weeks ago and they have now been shipped, I only vape Kayfuns and if these are as good for flavour as the Mini V3 I will follow this order up with another. I have high hopes that the Prime will be good for flavour with the 22mm configuration which I prefer
|
|
|
|
Post by goneforagasper on Nov 2, 2017 19:12:09 GMT
Have done a sample mix but had to substitute 2 of the concs - Cap vanilla custard to replace TPA and F'Art fresh cream to replace the Bavarian. Won't be the same as TJ 's but could be interesting  |
|
|
|
Post by goneforagasper on Nov 2, 2017 12:08:35 GMT
Hi do you know the manufacture of this one or is it just a no name? I have a 10er if thats any good to you, i hear these have crap orings and need changing out  I've been using one of these for a couple of years and not had to change the o rings |
|
|
|
Post by goneforagasper on Oct 27, 2017 15:38:23 GMT
Unfortunately the Prime will be available on 05/11  I will be pleasantly surprised if it is available 05/11 |
|
|
|
Post by goneforagasper on Oct 27, 2017 9:50:13 GMT
Halloween sale.. 10% off, site-wide 4 days 28th-31st October Use code CANDY Just ordered a few bits only last week So did I but the SXK Kayfun Primes had a built in discount code and the other bits and pieces didn't cost much |
|
|
|
Post by goneforagasper on Oct 12, 2017 15:19:14 GMT
Happy birthday Kevin and thank you for your recipes  |
|
|
|
Post by goneforagasper on Oct 1, 2017 19:17:11 GMT
All the Manabush range  Has anyone got near this with DIY, I've been trying for 3 years with no success |
|
|
|
Post by goneforagasper on Sept 28, 2017 18:44:28 GMT
SCREWS
Deck screws: M1.6 x 0.3mm
Fill hole screws:
Kayfun Lite: M2.5 Countersunk, length = 4mm (use this if the screw sits flush at the base).
KFL+ : M2.5 Pan head, length = 4mm (use this if the screw is a round head and recessed in the hole).
I find that going with 5mm length is better - less leakage
|
|
