Recent Posts

You know that hadn't even crossed my mind. But as those nice pep's at commi HQ own all the ciggy factories...Yeh I expect they wasted no time stamping out vaping when it raised it head.
You know what they say in China... 'There's plenty more where they came from'.

Yes the Samsung 25r is a 20A battery each 10A of power on a battery is good for 25W of Mod power so a single 25r would be good for 50W. In a 2 battery MOD a pair of 25r's would be good for 100W when used together, 20A+20A=40A.
Dont get caught out thinking those 35A batteries are 35A, they are not. Sony, plus the few others listed are the only true 30A batteries available.
Dont buy Sony's for 6.99 on ebay, they will be fake for sure.
The only person I trust is Norbert at ecoluxshop for tested genuine batteries, he lists the continuous discharge rate(the one we want) alongside those peak discharge rates so you know what you are getting. But thats just me(and many others here).

Here you go tim




For duel coils, change from 'single coil' to 'duel coil' in bit that says 'SETUP'
For duel coil I would change 'TARGET RESISTANCE' to be closer to the min resistance that your mod will allow.
Then its just diameter of the coil and diameter of the wire to set that you are going to use

It does work in a kinda strange way, in that you have to play with the 'TARGET RESISTANCE' number until it shows an acceptable number of wraps needed. So if you end up a lower resistance than your mod will work with to get your 7-10 wraps, then you need to change to a thinner wire, or a smaller change can be got from changing the diameter of coil used(larger coil giving you longer piece of wire used=more resistance).

So I change Setup to Duel coil and I find i need 13.5 wraps for same .15 Ohm
So seeing if can get wraps down without changing wire, I lower target resistance to .11(in pic below) which is just above the min .1 that my mod will allow.
Now i see that i can get away with a 10 wrap coil, on the 3mm former, which is just about acceptable to me and I dont need to get out the .2 wire.
I wont do another screen shot but if you now change to using a 4mm diameter coil(like i like to use) you will only need 8 wraps to be at the target resistance of .11 Ohm.




you can improve the accuracy a bit by changing 'leg length' to something more like 8mm-12mm but that depends on the atty and whether you need long legs for it or not.

The above is the only way to work it out, I have a tablet with a 10,000mAh battery in it and with a 2.1A charger and a decent usb lead it takes about 6 hours to charge up from 15% left which is when it starts to warn me every 5 mins.
Even having a decent usb lead makes a difference as charge is lost due to resistance in the lead. A 28 AWG lead will make a big difference over a cheapy to the time it takes to charge.

Stealthvape seem pretty reasonably priced with their 50% more for free offer.

My TC is on its way still so don't take this as tested by any means at all, but I went for .2 and .25 to try duel coils, and .3 and .35 to use on single coils(Like large 4mm coils when possible)

Have I made the right choices??????

Thanks decoy, I didnt want to use air holes so might just use a drop resin to fill them in. Main priority was BIG BORE top 'n' bottom, and nice color.

Drip tips of many colors.







Just thought everything I have is sliver/black/gold.
I want some color.