Recent Posts

flavourtank similar to Mike I found that more is better with the uwell. I used 2 methods both worked well.

Method 1 thickish amount that i then folded at the end so it was like a sandwich. Had to use a pointed tweezer to get it all in when putting rba back together.

Method 2 wick it like normal then cut the wick in both sides close to the coil. Them cut 2 small ish squares of cotton. Juice the wick then stick a square in each end of the cotton wick. Again will need ro be squeezed in a little to get the rba cap back on

fairly sure thats what its called. 

so i used 26 guage as my core. and claptoned with 2 strands of 34 guage.

removed one strand after both had been wound on to create a stagger

then finally cut it in 2 placed in chuck and wound another strand of 34 between the gaps.

took some time about 1 hour to make and coil/wick. also i wont use 34 again. its easy enough to use but i cant see the wire well once its on so took longer as a result   pic quality is poor due to close range and poor camera






final result 5 wraps dual coil in a goliath V2 coming out at 0.17 ohms. very dense vape and great flavour

indeed it does. wasnt sure whether to put in the 70 or 7. having a rookie moment

 

saved me from a fatal error ty car147

this is better now? gyazo.com/e3b6931ccba568297f95f695eba5b0a5

so have i done this right before i start mixing ? prntscr.com/8s8th0

this is the nicotine i am using www.ukflavours.com/57-nicotine

Plug and play means you connect the device or hardware to pc and the pc automatically detect what driver it needs and installs it for you. So you can literally plug it in and use the device a few moments later

Yep have some in the way already