intelicide
Full Member
Yess...this is what I actually look like...
Joined:August 2013
Posts: 102
Location:
Likes: 45
Recent Posts
Last Online Feb 8, 2018 15:29:20 GMT
|
Post by intelicide on Aug 10, 2013 22:44:42 GMT
Off the rollies for a bit over a week now,Ego starter kit CE4 clearomizer with standard 650 mAH battery (in a little silver tin with a window for £20 and free 10ml juice,feels just like my old Golden Virginia limited edition tin)and Liberty Flights apple 24% is my kit right now.I am an instant convert and love vaping and the tech and the gear(also the unexpected lifestyle change...) This setup will do me for now but I aim to get an Evod with an Ego twist 900mAH after reading endless reviews and vids .
My fluke 77 multimeter shows I have a 3.2 ohm coil measured at room temp not vaped for about half an hour.
I want more volume of exhaled vape like in the youtube clips I have seen. People using Ego ce4's seem to get more clouds than me. So my question is this:
Should I use a lower resistance coil to get more smoke?
Or
Should I use juices with more VG to make more smoke?
|
|
|
Post by Phoenixflame (Julie) on Aug 10, 2013 23:19:08 GMT
intelicide either of those things should produce more vapour.
|
|
chykensa
Super Member
a.k.a. AndyB
Custard fan :)
Joined:October 2012
Posts: 7,539
Location:
Likes: 6,404
Recent Posts
Last Online Sept 8, 2019 8:44:58 GMT
|
Post by chykensa on Aug 10, 2013 23:36:39 GMT
And both will give you even more!! Just a point which I have picked up from these hallowed threads, especially as my electrical knowledge extends to how to plug in my laptop to the mains - I believe you have to ascertain the base resistance of your multimeter by touching the contacts together, and then subtract that from your reading. I say this because I really can't believe that your Clearos are really 3.2ohm. It is much more likely to be in the region of 2 - 2.5ohm, which might be closer if you try what I have suggested above. Please try it out and then post back, as I would love my limited scientific knowledge to actually prove to the right! Andy
|
|
Bluefish
Super Member
Ninja Master
Joined:April 2012
Posts: 6,864
Location:
Likes: 3,211
Recent Posts
Last Online May 3, 2018 21:58:10 GMT
|
Post by Bluefish on Aug 11, 2013 0:42:56 GMT
Try filming or taking a pic of your current setup, what I'm trying to say is it always appears like there is more vapor on film than there probobly is because 1, it's coming straight towards you 2, It's coming from at most 3 feet away, tricks of the trade mate. But for more vapor take longer slower draws, and upping the vg gives more vapor.
|
|
giles
Super Member
Rogue Element
Joined:August 2012
Posts: 2,208
Location:
Likes: 709
Recent Posts
Last Online Feb 23, 2013 12:10:56 GMT
|
Post by giles on Aug 11, 2013 2:24:13 GMT
The other trick to get a video with lots of vapour is suck it into the mouth and blow it out again - no inhale.
I don't think you'll be disappointed with the twist/evod - it's what I use myself for out & about, and you'll get clouds of vapour with a high-VG juice if you turn the volts up - but if you are, try a dual-head top coil (like the iclear, or nova with X-heater), which I reckon give more vapour for any given voltage.
|
|
raid2506
Mod Maker
Diablo Rey
This is my Riva - There are many like it but this one is mine!
Joined:November 2012
Posts: 1,429
Location:
Likes: 987
Recent Posts
Last Online May 17, 2023 1:08:20 GMT
|
Post by raid2506 on Aug 11, 2013 8:38:27 GMT
It's also because the bright lights reflect and refract within the vapour cloud making it appear denser.
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 22, 2024 14:42:38 GMT
|
Post by Deleted on Aug 11, 2013 8:46:27 GMT
I found evod's tend to leak. Better off with a protank mini.....
Bit higher volume and fab. There are some youtube videos on how to test your resistance using a multimeter...
Or buy a vamo LOL
|
|
markm
VENDOR
Joined:March 2013
Posts: 1,942
Location:
Likes: 1,762
Recent Posts
Last Online Feb 10, 2020 19:35:33 GMT
|
Post by markm on Aug 11, 2013 8:59:01 GMT
As a rule of thumb higher watts will create more vapour, that's assuming the juice can get to the coil fast enough. you can increase the watts by either a lower resistance coil or upping the voltage. A mod with vv/vw and ohms tester will allow you to experiment and get the most from whatever atomiser you are using.
|
|
djs
Super Member
Puffing on the RY4 today.
Joined:October 2012
Posts: 9,413
Location:
Likes: 5,874
Recent Posts
Last Online Oct 29, 2019 6:13:03 GMT
|
Post by djs on Aug 11, 2013 9:10:38 GMT
I say buy a carto tank and some low Res cartos. Maybe it's just me, but this set up whoops the backside off an evod. The only way to vape huge clouds from a wimpy clearo is to boost the volts miles up. For that, an 18650 vv VW mod is better. I.m.o.
|
|
raid2506
Mod Maker
Diablo Rey
This is my Riva - There are many like it but this one is mine!
Joined:November 2012
Posts: 1,429
Location:
Likes: 987
Recent Posts
Last Online May 17, 2023 1:08:20 GMT
|
Post by raid2506 on Aug 11, 2013 9:49:53 GMT
Set up a webcam and 50w spotlight, shut your eyes and record yourself vaping. Then simply play it back to see bountiful clouds of vapour!
|
|
intelicide
Full Member
Yess...this is what I actually look like...
Joined:August 2013
Posts: 102
Location:
Likes: 45
Recent Posts
Last Online Feb 8, 2018 15:29:20 GMT
|
Post by intelicide on Aug 11, 2013 10:18:44 GMT
Set up a webcam and 50w spotlight, shut your eyes and record yourself vaping. Then simply play it back to see bountiful clouds of vapour! Hey raid,you have given me an idea... Instead of the 50w light,i could use this disco light projector which i am repairing for someone: ) Anyway,I measured the coil again today and got 2.8ohms. When i short the probes together the meter reads 00.0 I think the fluke can automatically subtract probe resistance to zero the reading. So,it seems a lower ohms head is for me.
|
|
chykensa
Super Member
a.k.a. AndyB
Custard fan :)
Joined:October 2012
Posts: 7,539
Location:
Likes: 6,404
Recent Posts
Last Online Sept 8, 2019 8:44:58 GMT
|
Post by chykensa on Aug 11, 2013 12:34:37 GMT
2.8ohm is a more realistic reading intelicide - sounds as though your multimeter takes the probe resistance into account. Something around the 2.0 ohm mark would definitely create more vapour, and coupled with a battery or mod where you can adjust the voltage or wattage would improve this further. Happy experimentation! Andy
|
|
padiho
Super Member
Joined:August 2012
Posts: 1,360
Location:
Likes: 658
Recent Posts
Last Online Oct 30, 2019 8:40:35 GMT
|
Post by padiho on Aug 11, 2013 13:35:48 GMT
Don't discount the Vision Spinner 1300. IMHO it knocks tin hats of the twist
|
|
mittenkitten
New Member
Fighting The EU E-Cig Ban
Joined:August 2013
Posts: 22
Location:
Likes: 5
Recent Posts
Last Online Sept 30, 2013 19:41:16 GMT
|
Post by mittenkitten on Aug 11, 2013 14:10:52 GMT
Off the rollies for a bit over a week now,Ego starter kit CE4 clearomizer with standard 650 mAH battery (in a little silver tin with a window for £20 and free 10ml juice,feels just like my old Golden Virginia limited edition tin)and Liberty Flights apple 24% is my kit right now.I am an instant convert and love vaping and the tech and the gear(also the unexpected lifestyle change...) This setup will do me for now but I aim to get an Evod with an Ego twist 900mAH after reading endless reviews and vids . My fluke 77 multimeter shows I have a 3.2 ohm coil measured at room temp not vaped for about half an hour. I want more volume of exhaled vape like in the youtube clips I have seen. People using Ego ce4's seem to get more clouds than me. So my question is this: Should I use a lower resistance coil to get more smoke? Or Should I use juices with more VG to make more smoke?
|
|
mittenkitten
New Member
Fighting The EU E-Cig Ban
Joined:August 2013
Posts: 22
Location:
Likes: 5
Recent Posts
Last Online Sept 30, 2013 19:41:16 GMT
|
Post by mittenkitten on Aug 11, 2013 14:15:36 GMT
It does seem that 3.2ohms would seem to be high, as has already been said it should around 2.2-2.5ohms which is the standard setting, also as said before both would do the trick...I get lots of vapour and I use 100% VG e-liquid but as I'm new here don't think I am allowed to say where from. I have been vaping since 23rd June 2012, I found out I had a PG allergy and went on a massive search for the best VG e-liquids, eventually found them and I do get a throat hit, lots of vapour and tons of flavour too xx I use a couple of kits, I love my eGO-C Twist and use it with a CE5, an Evod and a X9 Protank, use the X9 Protank for clearo crackers and have pineapple in it at the moment, which is delicious and clouds of vapour x MK
|
|