Help. Burnt taste new mini protank

[sammy13]

The rgm is fatter, that is why it doesn't fit down the hole.

[sammy13]

Try the protank head in the rgm, it should fit

[babs]

Your protank minis look like they are protank mini3's are they?

[rednutt]

On both pics the rgm2 is to the right. The pic with the 3 heads in is evod , mini protank them rgm2

[sammy13]

Just noticed as well, I would say that those are genuine kanger heads, the two in the middle, because of the grommet at the bottom, it is a clear plastic rather than rubber, and that I believe is what kanger are supplying now.

[rednutt]

No it's the mini 2 v2

[sammy13]

So, the rgm head will not fit the others because it is fatter, however the other 3 should fit the rgm.

This isn't much help if they are caput, but they may just have needed more soaking, perhaps they got dehydrated on their long journey ???

Also check your box again, there has to be a code on it, or a scratch panel or something, I don't have my boxes otherwise I would put a pic on for you to look for.

[rednutt]

Apr 14, 2014 22:46:30 GMT decoy said:

look at the voltage and wattage setting and turn them both right down if you have it set to max on ether it will taste burnt to do this
press and hold the - button till you get a p or a u and some numbers then repetitively press the - button till the numbers stop going down
if it was a p that came on the screen that time press and hold the - button then whist still holding - button press and hold the power button .p and some numbers will sow up but keep holding both buttons till u and some numbers show up then let go of power button and repetitively press - button till it shows P6.0
if it was a u and some numbers that showed up 1st press and hold the + button then whist still holding + press and hold the power button u and some numbers will show up but jeep holding the 2 buttons till p and some numbers shows up then repetitively press the - till it shows u3.3
then try one of your tanks again with what you think is a duff head if you only had a few goes on the head it might clear up after a few drags i have over cooked the protank heads a cupple of times but as long as you only used it a few times it might work
i norm have mine set to
P8.0
u3.7
hope that makes seance

durrr im numb and not slept for34 hours i just rem you got it turned down lol

Yep had it set at 3.3 and 6w very lowest setting so I didn't kill it but you can't kill what dead/duff anyway lol

[pegasus]

This may help you

[rednutt]

Right I have put all my settings to lowest again and popped the rgm2 on itaste after soaking it and putting a wee bit juice down the post of head not the mouthpiece as I thought lol and put juice directly onto the wick and it's working no problems! I haven't put the duffers into the rgm2 tank yet but I will do that just now.

OMG! sammy13 I've just put the protank head into the rgm2 tank with a little bit juice down the post and on the wicks and it's working no burnt taste yet!

[sammy13]

Apr 14, 2014 23:32:17 GMT rednutt said:

Right I have put all my settings to lowest again and popped the rgm2 on itaste after soaking it and putting a wee bit juice down the post of head not the mouthpiece as I thought lol and put juice directly onto the wick and it's working no problems! I haven't put the duffers into the rgm2 tank yet but I will do that just now.

OMG! sammy13 I've just put the protank head into the rgm2 tank with a little bit juice down the post and on the wicks and it's working no burnt taste yet!

If it keeps working, try it again in the protank

[rednutt]

pegasus thanks for that. I will try it but I took the rubber bit off and couldn't get the post off to get access to the wicks. Will try again when I'm not so tired.
sammy13 sack everything I said from OMG. I think it's cause I'm knackered but what I actually did was take out rmg2 head and got my protank one back out the box then picked up my rmg2 instead of protank and put the bloody thing back in again and vaped on it for a bit and got the burnt taste again. I think what's happening is the juice down the post is being used and it's fine. When that drys up I'm getting the burnt taste. I took it back out to put the original rgm2 head back in when I realised it was that one that was already in it and the protank one never made it in. I'm no use at this carry on lol
Super-Shiny can I please send my rgm2 aswell as my protanks and evod for pimping? Losing the will here.
Everyone who has posted on here in an effort to help me thank you so much. I hope one day I can repay with imparting all this wisdom I'm gaining onto someone else in need of help. I doubt it but we can hope xxx

[sammy13]

Apr 15, 2014 0:02:26 GMT rednutt said:

pegasus thanks for that. I will try it but I took the rubber bit off and couldn't get the post off to get access to the wicks. Will try again when I'm not so tired.
sammy13 sack everything I said from OMG. I think it's cause I'm knackered but what I actually did was take out rmg2 head and got my protank one back out the box then picked up my rmg2 instead of protank and put the bloody thing back in again and vaped on it for a bit and got the burnt taste again. I think what's happening is the juice down the post is being used and it's fine. When that drys up I'm getting the burnt taste. I took it back out to put the original rgm2 head back in when I realised it was that one that was already in it and the protank one never made it in. I'm no use at this carry on lol
Super-Shiny can I please send my rgm2 aswell as my protanks and evod for pimping? Losing the will here.
Everyone who has posted on here in an effort to help me thank you so much. I hope one day I can repay with imparting all this wisdom I'm gaining onto someone else in need of help. I doubt it but we can hope xxx

Oh drat, ok what we do know is this -
you have an evod, a protank mini and a rmg, and they will all take the same heads, the universal kanger heads for evod/protank.

As far as we know the protank is genuine, the heads certainly look as though they are with the new bottom bung.

So you have 3 tanks which should work perfectly.

I have no clue why all the heads would be duds, but you have done nothing wrong.

Hopefully some new heads will have you up and running.
Regarding the  centre post, you may need pliers to pull it off the first time, I did.

[rednutt]

Ahh thanks Sammy, will try with pliers after work tomorrow. With regard to the security scratch thing I definitely don't have that but I do have a QR scan box thing and when scanned it comes up KangerTech www.szkanger.com www.kangertech.com. Congratulations on your choice of kanger ecigartte. Yes ecigartte spelt like that lol. Is this the new security thing maybe?

[Super-Shiny]

Apr 15, 2014 0:02:26 GMT rednutt said:

Super-Shiny can I please send my rgm2 aswell as my protanks and evod for pimping? Losing the will here.
Everyone who has posted on here in an effort to help me thank you so much. I hope one day I can repay with imparting all this wisdom I'm gaining onto someone else in need of help. I doubt it but we can hope xxx

Sure, go for it, will PM you my addy.