Refilling the Evod

[eyes]

When I bought my evod, I also bought a couple of bottles of juice from Myepack. It seems to be taking forever to fill though as the bottles aren't very flexible.

I've read that some people use syringes. Would that be any quicker?

[enjay]

Yes, if the bottles aren't flexible. Using a needle also means you can get right in rather than trickle it down the side.

[eyes]

Many thanks enjay.

Will start looking.

[enjay]

I've often got syringes from boots the chemist but get blunt tip needles of ebay.

[enjay]

Found this too

www.vapeescape.co.uk/Mixology/Accessories/10ml-Syringe--Blunt-Needle.html?cPath=5_30

Or these

www.vapeescape.co.uk/Mixology/Empty-Bottles/Empty-Needle-Cap-Bottles-10ml--30ml.html?cPath=5_6

The squeezy bottles could be another way to go

[Perpetua]

There's 2 grades of plastic bottles that our liquids tend to come in eyes, the clear are the hard to squeeze - I don't get on with them either. Or, the semi opaque which are nicely sqidgeable. If you've any of those from elsewhere you could always transfer your liquid over.

Or this is another option, in addition to what Enjay has already suggested:

www.vapershed.com/department/accessories-stainless-steel-e-liquid-bottle

[jaysey]

The Dekang ones are soooo difficult to squeeze ! When I had them I had to use my teeth !!! .... How do you squeeze stainless steel !!

[smifee]

I use syringes and get them from here www.octoink.co.uk/categories/Refill-Tools%7B47%7DKits/Syringe-Kits-%26-Spares/

Size 14 is about right for Evods.

For anyone using Nature Vape Mini Pro tanks size 18 fits the fill holes.

[CaptainChaos]

jaysey how on earth did you get anything out of the Dekang bottles using your teeth?

They are difficult to squeeze, I agree. What I usually do is get some scissors & cut the end of the nozzle bit off, so there is a larger hole for the liquid to come out of. Works for me

[djs]

Jun 20, 2014 7:50:59 GMT CaptainChaos said:

They are difficult to squeeze, I agree. What I usually do is get some scissors & cut the end of the nozzle bit off, so there is a larger hole for the liquid to come out of. Works for me

Yes.

I snip off the end with nail clippers (ones used for wicks not my nails...)

I can't believe it took 7 posts for someone to actually point this out....

[CaptainChaos]

Because I only saw it 20 seconds before I posted it

Circumcisions cost more, ok?

[jaysey]

Jun 20, 2014 7:50:59 GMT CaptainChaos said:

jaysey how on earth did you get anything out of the Dekang bottles using your teeth?

They are difficult to squeeze, I agree. What I usually do is get some scissors & cut the end of the nozzle bit off, so there is a larger hole for the liquid to come out of. Works for me

The very first bottle I had didn't even have a hole in it ! Had to snip the end off with clippers ! Even then I resorted to squeezing it with my teeth into to the clearo !! Looked like a mad woman

[ronaldo]

I have never had trouble with any bottle but then again I have hands like clamps I can tighten nuts and bolts without spanners never have trouble getting can lids or bottle tops off

[prowler]

I decant my current vapes into 5 Soft PET bottles with blunt needle top. As I use cart tanks mainly, I find these a must have.

[ruffdog]

After receiving a few different juices from members here i also will be saving all opaque bottles (actually I'm saving all my bottles in the hope I can start mixing)
Had my first bottle I opened yesterday which had no hole in it, Had to use one of Gail's earrings to poke through the tip and puncture.
I also received a 1ml blunt syringe from vapemate with a glass bottle of juice (v nice bottle)
I also found a 10ml syringe and needle from an inkjet re-fill kit from yesteryear.
sanitized everything and put in sonic. All good to use now. the needle connects to both syringes too so win win.
all i need now is some nic base and flavoring i think. ohhhhh nooooooo 10 days till payday. I'll just have to wait I guess.

PS: also been saving any small bottles from the kitchen, ie, hot pepper sauce, 30ml and i even used my 3 year old miniature tabasco glass bottle. I needed an old friend (Tabasco taste kick) it's tiny 1.2ml lol. might be a perfect dripper bottle for out n about lol.

Ruffie