Upcoming bargain Focalecig !! DNA40 KANGXIN NOW CLOSED!!!!!

[BrenD]

Slightly smaller than I was expecting and a little heavier than I thought it'd be from looking at it. Both good things as it appears to be pretty solid.

Can't fault it for the price we paid.

Sent from my HTC One_M8 using proboards

[VapingBad]

Quite impressed that it has soft-limiting on the battery, it does not give you a low battery message like the Evolv just drops the wattage and after vaping about 3/4 of a day at 32 W the batteries measured 3.45 V (25Rs) which is a sensible level. I am going to try CGRs in it to check they get rejected at a higher voltage. The stability if the temp limit is a bit better after polishing the 510 centre pin.

As BrenD said they are pretty solid I reckon I could run it over with the car as the body is machined from a single block of alloy.

[Deleted]

Still really pleased with mine despite the paint wearing on the back shoulders. Defiantly in my BEST BUY group

[Deleted]

Some were their from new, but you can see what I mean

[Deleted]

Took mine to work today. Was brill though kept hitting the little buttons instead of the fire one. Going to stick to cloupor for the car.
Really liking this flask mod

[glen]

Jun 22, 2015 12:36:16 GMT @tedster said:

Some were their from new, but you can see what I mean

Theres those ladies fingers again lol

[Deleted]

glen it's my special blend of hand soap and don't be jealous mate you and you're dirty mind

[Deleted]

glen is this better ? My leg with the smiley tattoo my older son did when he was 9

[glen]

Jun 22, 2015 12:49:31 GMT @tedster said:

glen it's my special blend of hand soap and don't be jealous mate you and you're dirty mind

My mind Is as clean as yours lol

[phatfil]

tut tut when did you last shave or wax them legs @tedster the stubble is getting a bit long there.

[Deleted]

Jun 22, 2015 13:00:52 GMT phatfil said:

tut tut when did you last shave or wax them legs @tedster the stubble is getting a bit long there.

I'm a very hairy man mate, apart from my special area lol ooohhhh matron

[Q]

Jun 20, 2015 19:59:07 GMT Q said:

Foclecig may not be around for a couple of days,
1. Its the weekend
2. They have their dragon boat festival

But I'm sure she'll answer on here as soon as she's back

Spoke to Foclecig (hypothetically) a little while ago, she's back at work tomorrow and will look in here then

Jun 20, 2015 18:12:53 GMT drunkenbum said:

Mine seems to have decided to no longer function after being Sat on the side all day

[drunkenbum]

Jun 22, 2015 15:02:24 GMT Q said:

Jun 20, 2015 19:59:07 GMT Q said:

Foclecig may not be around for a couple of days,
1. Its the weekend
2. They have their dragon boat festival

But I'm sure she'll answer on here as soon as she's back

Spoke to Foclecig (hypothetically) a little while ago, she's back at work tomorrow and will look in here then

I've sent her a PM so hopefully she'll pick it up and get back to me tomorrow.

[Foclecig]

Hi drunkenbum,

Sorry to hear that. Please check the message i replied.

Q, @tedster and @letsavit Thank you so much for tagging me!!

[vern]

well..captain slow here, checking in again. After the awesome Vaping bad hooked me up with some nickel on saturday at the lond+se vape meet, I built a few coils today and played around with the little red flask. This would also be my first TC device.

Its like traction control, but for wattage and juice control:-) I've got a mini-erl which either leaks or dry hits, so I built it with a coil+wick that I was convinced would dry hit, set it to 20w and 430deg F and let it rip...and you can visibly see the chip dropping the watts to keep things under control (for reference, it went down to as low as 4watt all by itself...considering I ran this on an istick 20w at 5.6w with the occasional ugh moment, it does seem right). Leave it for a bit to cool down, and it'll fire nice, then slowly drop the watts again, all the while "temperature protection" is flashing away. The vape however remained ever so consistent. Amazing:-)

Built a dripper (igo-w) with a similar coil, did the same, and it'll drop the watts to about 11w or so to keep the temp steady and under control. Even better the only way you know you need to drip is the vape quantity slowly drops off. The taste stays the same, same heat.

This is pretty clever stuff, and I'm impressed.
(both coils were around 0.24ohms) using 0.3 nickel..
What is even nicer is to just wet the wick a bit one or two drops and fire away, and you can see what the chip is doing as the liquid diminishes.
I'm going to dig out my old aqua v1 (functional juice control) and I'm pretty sure I'll be able to see how the juice control affects the throttling of the chip.
That flask squonker is looking even more tempting.