dna 200.....

[Deleted]

If this was 80-100w with TC and duel 18650 I would have been all over it, Li-po and 200 w nay chance. But to be fair I never started vaping to blow " Big Clouds" I vape to stop smoking, and during the course it's turned more to a Hobby
In actual fact I reckon I will be going more in the Squonking direction at home, and a temp control mod out and about.

[letsavit]

Jun 13, 2015 12:54:20 GMT car147 said:

If this was 80-100w with TC and duel 18650 I would have been all over it, Li-po and 200 w nay chance. But to be fair I never started vaping to blow " Big Clouds" I vape to stop smoking, and during the course it's turned more to a Hobby
In actual fact I reckon I will be going more in the Squonking direction at home, and a temp control mod out and about.

I'm waiting to see this NI200 build that needs 200 watts to run at a vapable temp, someone enlighten me.....

[geordie_vaper]

side note i dont like how vs and vaporflask are teaming up i dont understand it.

why are vaporshark making a vaporflask its weird and hmm dont sit well with me

[VapingBad]

Jun 13, 2015 11:01:54 GMT VapingBad said:

I reckon 70 mm x 17.5 mm if the Lipo pins are at 2.5 mm pitch, not bad as you will need a big box for a lipo or 3 18650s.

From ECF

Board Dim. 71mm x 18mm

[VapingBad]

Jun 13, 2015 13:00:48 GMT letsavit said:

Jun 13, 2015 12:54:20 GMT car147 said:

If this was 80-100w with TC and duel 18650 I would have been all over it, Li-po and 200 w nay chance. But to be fair I never started vaping to blow " Big Clouds" I vape to stop smoking, and during the course it's turned more to a Hobby
In actual fact I reckon I will be going more in the Squonking direction at home, and a temp control mod out and about.

I'm waiting to see this NI200 build that needs 200 watts to run at a vapable temp, someone enlighten me.....

Just airflow, any 200 W build needs mega airflow and this board takes lower R than the 40 so it it perfectly possible, Busardo quotes 0.08 ohm for kanthal.

[VapingBad]

Jun 13, 2015 13:07:57 GMT geordie_vaper said:

side note i dont like how vs and vaporflask are teaming up i dont understand it.

why are vaporshark making a vaporflask its weird and hmm dont sit well with me

Tis odd, maybe they decided that VS get small form factor and VF get large and share the costs of small parts, mounts etc.

[Deleted]

Jun 13, 2015 13:07:57 GMT geordie_vaper said:

side note i dont like how vs and vaporflask are teaming up i dont understand it.

why are vaporshark making a vaporflask its weird and hmm dont sit well with me

Totally agree m8, Vapour Flasks are a cracking mod in design and operation, sadly I could only afford the cloned version, on the other hand I have been very disappointed with my Genuine Vaper Shark Rdna 40, just purely on a totally crap finish which I doubt did Evolv any good just being connected to them as the chip supplier, don't get me wrong it works perfectly, but to be in this state in 5 mths is an absolute disgrace imo.

Vaper Shark USA's response is we will give you a new skin 

[Deleted]

Damn I wish these pics would come out right way up

[letsavit]

Jun 13, 2015 13:16:06 GMT VapingBad said:

Jun 13, 2015 13:00:48 GMT letsavit said:

I'm waiting to see this NI200 build that needs 200 watts to run at a vapable temp, someone enlighten me.....

Just airflow, any 200 W build needs mega airflow and this board takes lower R than the 40 so it it perfectly possible, Busardo quotes 0.08 ohm for kanthal.

I don't want mega air flow, just enough to inhale, I'm not trying to cool the coil, the exact opposite I want to heat it for vapor.

Like Greg said earlier maybe I'm being presumptuous but all I know now is 200watts, lipo batteries and 0.08 kanthel builds all of which I have no interest for. Thought this company was about innovation, temp control, new ideas, looks to me like bigger is better and cloud chasing is their new way forward.

[tpat591]

[VapingBad]

I am sure they will release a lower power version after this goes into production as they have with the 40 & 25 letsavit, this is still in beta ATM nothing is fixed. the software side appeals, the ability to adjust loads of parameters vis a PC and data capture, but like you and others I will wait for a smaller form factor version that can run from an 18650, probably.

[letsavit]

Jun 13, 2015 13:20:32 GMT car147 said:

Jun 13, 2015 13:07:57 GMT geordie_vaper said:

side note i dont like how vs and vaporflask are teaming up i dont understand it.

why are vaporshark making a vaporflask its weird and hmm dont sit well with me

Totally agree m8, Vapour Flasks are a cracking mod in design and operation, sadly I could only afford the cloned version, on the other hand I have been very disappointed with my Genuine Vaper Shark Rdna 40, just purely on a totally crap finish which I doubt did Evolv any good just being connected to them as the chip supplier, don't get me wrong it works perfectly, but to be in this state in 5 mths is an absolute disgrace imo.

Vaper Shark USA's response is we will give you a new skin 

And with hindsight 90% of my problems I have ever had with temp control was caused by that mod, vaporshark can sell them for £20 and I'll still buy a mini clouper over one of them.....!

[tpat591]

Just listing a few of the many features from the software plate (no time to list them all or explain them):

Get information about your device
Restore Defaults
Atomizer Analyzer
Select coil material
Set power limits
Set Preheat limits
Select Preheat "punch"

Battery type
Capacity
Cell soft cut off

Mod resistance
Ohm lock range
Preheat time limits

Case analyzer

[Greg]

Jun 13, 2015 13:57:50 GMT letsavit said:

Jun 13, 2015 13:20:32 GMT car147 said:

Totally agree m8, Vapour Flasks are a cracking mod in design and operation, sadly I could only afford the cloned version, on the other hand I have been very disappointed with my Genuine Vaper Shark Rdna 40, just purely on a totally crap finish which I doubt did Evolv any good just being connected to them as the chip supplier, don't get me wrong it works perfectly, but to be in this state in 5 mths is an absolute disgrace imo.

Vaper Shark USA's response is we will give you a new skin 

And with hindsight 90% of my problems I have ever had with temp control was caused by that mod, vaporshark can sell them for £20 and I'll still buy a mini clouper over one of them.....!

And conversely I use mine daily 




but then I haven't really bothered with TC, but of a gimmick for me but if it works for others it's all good.

[tpat591]

Size officially 71mm x 18mm