Recent Posts

If anyone is looking for authentic iclear30 heads, they can be had for €9.00 (£7.55) for a 5 pack delivered from ebnferro:

They do both the iclear16 and iclear30 heads in 1.5? and 2.0?

ebnferro.com/catalogsearch/result/?q=coil+head+iClear

LBC - Petrie Hosken - 14th September 2013, 2pm.

I've edited to exclude breaks and jingles. Total length: 45m53s. Download size: 18.3MB

www.dropbox.com/s/kpzonvx227y8w7g/LBC%20Conversation%20-%20Petrie%20Hosken%20-%20E-Cigarettes%20-%2014th%20September%202013%20-%20edited.mp3

Top call Matt

Agree with the Liqua vanilla. It's horrible as is the coffee and French pipe but taste is subjective. I know some that love the French Pipe.

I do like the Liqua citrus mix, berry mix and mints flavours though. The mints flavour being my favourite of the bunch.

Thanks for posting this here Greigster. I saw it earlier on UKVapers and have written to my MEPs.

Things will not change if we don't all take a little time out to help ourselves and our fellow vapers. It's all too easy to forget or become complacent but we all must be counted.

Everybody, please please do this. It won't take up much time once you get going. A plea from the heart will help all vapers, present and future.

I've also been trying to rebuild my protank for the last hour or so using 2mm ekowool and 0.2mm Kanthal.

First couple of times were a disaster. Constant burnt taste, then I realised I was strangling the wick as I was threading a needle through the ekowool and wrapping fairly tight.

This time I used one of those tiny allen wrenches held alongside the wick and wrapped tight. This worked, 2.1? with 4 wraps and it seems to be vaping very well at 7.5W.

I'm not getting a burnt taste even though this time I didn't bother twisting the legs. I'm not using any flavour wicks either.

Having said that, perhaps doubling over the wire and twisting the legs is something you could try to lower the resistance of the wire that touches the grommet?  It could be that the voltage you're vaping heats the legs up too much.

A little tip for better wicking on iclear16 and iclear30s:

Take the silicone cap off that sits on top of the wicks. You will see two notches that are cut out to accommodate the upper wicks. Cut them a little higher with a good pair of scissors.

If you don't want to enlarge the notch, cut a small slit upwards from the notch so that when it's placed on the wicks, the silicon separates a little.

I sometimes also cut little notches to sit above the lower wicks.

This way there's no way your wicks will be strangled by the cap.

Don't overdo it otherwise you'll get flooding.