Recent Posts

snout71 the pin in your first picture is currently on the bottom of the Ithaka and the pin in your second picture is currently inside the ceramic. They need to be changed over. Firstly remove the grommet/sleeve,(not required), from the pin in your first picture then put that pin inside the ceramic and then screw the shaft with the clear silicone grommet on it, (do not remove the silicone grommet), in the bottom of your third picture. As you look at your third picture it is the right hand side that marries up with the pin in your first picture. The pin in your second picture then goes onto the other end of the shaft that is then adjustable for the 510 connections.

Hope it makes sense.

Griff

snout71 the brass screw on the pin I believe is only on the genuine Ithaka. The clone has that screw on pin in SS, which is the part shown by the blue arrow, which I think you are referring to.


The way to rebuild the Ithaka is as shown in the video in @yinyang post on page 29, (just scroll down the page).

Hope it helps.

Griff

sammy13 just seen this on another forum posted today at 1100 hours:

Dear customers,

We are happy to inform you that China registered airmail is now available again. Because of the strengthened security check at airports in China, some products are not allowed to ship via china airmail at present. They are listed below.

Products NOT allowed:
1, All liquid(e-juice,flavour)
2, All batteries( including li-ion batteries)
3, All mods( including APV)

Products allowed:
1, All kinds of clearomizers, atomizers, cartomizers.
2, All kinds of replacement coils.
3, All kinds of drip tips, cases, lanyards, covers.
4, Empty bottles, syringes.
5, Other accessories like chargers

Check above list please before placing an order, this will help us a lot.

As before, China Registered Airmail enjoys the lowest priority. The delivery time can NOT be guaranteed if you choose China Registered Airmail.

Griff

Brambles sorry if you were already aware, but this VIDEO posted by Super-Shiny shows a great way to make your own res/non res wires to whatever ohms you want.

Griff

On sale at FASTTECH for £11.56 in black, blue and silver.

Not a bad price especially as it has a rechargeable battery.

3-digit LED display

Side ON/OFF switch

Range for tested resistance: 0 ohm to 9.9 ohm

Range for tested voltage: 0 V to 9.99 V

Accurate to 0.1ohm / 0.01V

Input voltage: DC 5V

Operating temperature: 0 to 40C

510/eGo connection

Micro USB charging port

Built-in 550mAh rechargeable battery

Griff

Brambles your post was not taken any other way than you are trying to be helpful

I am neither annoyed or frustrated it is more a case of I was hoping to be vaping on it tonight, but can`t

I am more concerned about people buying the Ithaka from Focalecig who are new to RBA`s with parts in the wrong place and an "O" ring missing.

You are right that it is the suppliers error, but as you say Focalecig should ensure that goods sent out are correct.

I will wait to see what Doris has to say/do to rectify the error.

in the meantime I am lucky that I have more than enough RBA`s to vape with.

Griff