Recent Posts

For strong flavours like the coffee, you'll probably need to change the coil when changing juice or you'll get a tainted flavour.

For cleaning, you can just take it apart and wash it. I leave my bits to soak for about an hour in hot water and washing up liquid, rinse it off and dry with kitchen roll then air dry for 24 hours - this includes the coil. You can just rinse everything out, but make sure the wick is completely dry before trying to use it again.

You may be better off getting a few tanks to let you have a few juices on the go.

Well, even the clones aren't really cheap - cheapest I've seen was £25, but they soon sold out!

It's in stock here for £40:
www.smokecloud.co.uk/tanks/silica-tank/kayfun-russian-91-clone-sc-silica-tank

If you need to keep an eye on the pennies (and lord knows that's sensible!) my advice is to stick an order on fasttech, they have several different models. The delivery time will be long but it'll only cost you £10 without airflow control:
www.fasttech.com/products/1605200
Or £18 with:
www.fasttech.com/products/0/10006473/1552300-russian-91-styled-rebuildable-atomizer-4-5ml

www.modsandatties.com/en/home/35-the-russian-91-v2-plus.html

...but their server seems to be down at the mo.

They also sell other kayfun clones. Other places like vapegeek have cloned attys, but none in stock at present.

Of course, you could go of the real deal - a kfl+ is in stock at cloud9vaping for around £70 posted.

Hmm, sounds like a short on the coil, not the MVP.

Not sure why it would need to be loose to fire - if I have a problem with my MVP, it always the opposite! Let's come back to this.

If the juice is tasting burnt, it's not likely to be the battery. It's likely that the coil isn't getting enough juice through the wick. In my experience, the Kanger coils are if varying quality, and some of them aren't made very well. It may be that you've got a dodgy one. The coil doesn't burn juice, it vaporises it - at a higher wattage, it vaporises it quicker which means the juice has to flow quicker through the wick to keep up. The MVP only goes to 11w, this isn't particularly high. So my suggestion is try another coil!

The 0.9 ohms suggests a short on one of the coils in the protank 3. Again, likely to be a dodgy coil, and needs changing. Do you have a different device that reads resistance to check it?

This is the problem with these coils - varying quality in the production process, means you get a few badly made ones. In a way, it's why the single coils are better because they are easy to remake yourself. Just my onion!

Now the protank fitting issue - see if it's better when a new coil is in. If not, check the pin on the bottom of the unit is in properly.

This was the sort of thing I got for my mum: link