nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 7, 2016 12:13:46 GMT
Perpetua yeah I just saw them today on a marketing email after I ordered the clasikool stuff from a different vendor but seeing there 5litre containers it made me wonder just how much would I need and how often would I be brewing it up lol, something tells me though that whilst I might get away with having half a litre of nic concentrate in the freezer (but the bottles have to be in a clip top plastic box) I don't think she'd let me have a gallons of mixing agent hanging around as well .... still i'll wait and see how fast I go through the stuff, maybe i'll start working up litres of flavour mix and shoving them in the cupboard ready to be used later on lol
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 7, 2016 10:58:28 GMT
tc mode at 0.08ohms on a ni200 coil
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 7, 2016 10:30:16 GMT
yeah that's just funny, I would rather use the assault vest than one of those if your going to wear something then wear the right something although I would have to rebuy them because the 5 different colours (desert, woodland, winter, od, black, urban) I used to own I flogged to airsoft noobs some years ago
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 7, 2016 10:07:11 GMT
Thanks decoy I already have a bench mounted lit up magnifier and I will be using that. What I need is some lollipop sticks to tape my fingers to, to keep them steady!!!! just have a dram or three to steady the nerves before you start
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 7, 2016 9:52:53 GMT
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 7, 2016 8:58:09 GMT
according tothe tracking info it was Sweden surface mail sydsut
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 7, 2016 1:55:45 GMT
I ordered one of these nanotm ...it arrived today...& is totally lush & brill...highly recommend it...it will hold me box mods, juices, atties & much much more...thank you glad you got something you wanted, I just remembered having the wife whine about needing a new bag with pockets because her fave one didn't have any and I bought her an organiser along with 4 almost identical clone bags she loved the fact she can pick a bag to suit the outfit and just shift the insert across so brownie points for me and massive cash savings to boot that's only slightly smaller than my old day bag and looks to have an identical colour scheme oO, although I did also have others in black desert and OD because for some reason stores never asked me to hand them back, the kids trashed them though as kids do and the cheap version on tinternet just don't quite measure up /
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 6, 2016 16:35:22 GMT
I hate the DTs with the mesh shields... true, they don't spit, but the juice and condensation tends to build up on the mesh and all of a sudden, you get a whole bloody gob full of juice! you get he same thing with angled tips only they tend ot indicate its going ot happen as the vape starts struggling to come through and its very muted .... I just pull mine off the tank every so often and dab them on a bit of kitchen towel to reduce the likelihood of it happening
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 6, 2016 14:08:04 GMT
well both orders say dispatched via surface mail and start with the same 4 digit code, one claims to have bene dispatched on the 18th of dec and the other on the 28th of December, and no the mod doesn't have any bats, hopefully those will show up before the crius or tfv4 tanks do though otherwise I wont have anything to put them on ....(btw the mod is the koopor plus 200w in black which looks decent and feels well made)
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 6, 2016 13:41:22 GMT
I see one thing - prescriptionMy brain yells another - TAX!!!! Yep as per this quote: Although I admit that the article is great in that it is supporting the use of e-cigs which is what we have wanted to see put in print by health officials I do feel the same as @johanino that they are just gearing up for their own ends as e-cigs gain the right to be prescribed by the NHS. Shame on them for all the negativity in the past and only now giving support when it suits their agenda. Mixed feelings here from me they will need their coproducers in crime to get their collective fingers out a their jacksies then and actually start making the damn products they just issued the licence for, currently its listed as awaiting production, apparently there is some problem with quality control and battery safety to overcome in the crappy regulator chip they used ..... from reading another source it would appear that a different device would suit both the needs and the aims of the directive but not be quite as simple to operate that a toddler could figure it out in a few hours....
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 6, 2016 13:36:25 GMT
Not sure I agree with placing the wick against the holes. The wick should be slightly away from the holes to let the juice in. The little shelf that the wicks are sitting on in my pic above is what becomes the juice well when the chimney is put on. if the hole is open the juice will fill the chamber until it starts to drain out the airflow hole through the base of the deck, you have to obstruct the flow and the wick works well for that, in fact so long as its sucking the juice in from the tank it really doesn't matter if it lets a drop into the base of the deck or not, the idea of pulling the wick through the sides of the rba through the coil and out the other side is a decent one and I dare say pretty simple to achieve, if you leave a small amount dangling down on the outside of the deck it will also soak up those last few drops from the tank and reduce the waste when its time to refill it will also leave the deck generally cleaner when its time to renew the wick or coil (getting the wick through the coil then through the outer holes would probably be easier than threading it from one side through the middle and out the other) which will save time and mess and generally be a boon i'll give it a go next time I redo mine and see how difficult it is
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 6, 2016 12:47:44 GMT
this is getting ridiculous now, the batts were marked as dispatched on 18th of December, on the 24th of December I ordered a mod, both items were marked as dispatched by the same postage the mod arrived this morning (having been dispatched a week later than the batts) the bats are still somewhere en route... wanna bet they don't arrive until after the half dozen or so other items I ordered direct from china on the 2nd of jan do ?
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 6, 2016 11:29:52 GMT
lobeydosser with the premade coils they supplied my first wick lasted 2 weeks, but I destroyed the coil trying to get it out .... the second one lasted me 3 days (didn't like the juice) my first home built coil lasted a week but the wicks was still running fine but I was only chugging just over a tank full per day through them at a happy medium of 15.5watts as to the wire, I have used both 28 and 30awg on mine, the 30 was slightly easier to attach to the sodding screws, then I figured out if I measured them perfectly and used two pairs of tweezers I could just make a loop on the leg ends and insert the screws into that (sooo much simpler) its a learning curve though and what works for my bad eyesight and clumsy fingers might not be the same for you also the wick lasting thing is subjective to the juice you put through the tank, when I started I was rotating ry4/cherry mix with custard menthol and rhubarb n custard through the tank, and I noticed that the clearer liquids would get very dirty as the wick backflowed into the tank but I have also managed to get enough tanks up and running (pair of subtank minis and pair of mini nautis) that I can stick to a single juice in each tank and so now i'm finding the gunkers (custards and sweets) the wick is only lasting about a week ( I chuch about 1/3rd of a tank from each every day ...but the nic levels have gone down from 18mg to around 10mg)
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 6, 2016 9:02:05 GMT
So nanotm is the larger white washer in the pack, for the top of the tank? yeah you add it as well as the existing one to reduce the size of the gap at the bottom, its just aesthetic rather than functional on authentic tanks, although apparently highly necessary on clones
|
|
nanotm
MOVED ON
Joined:September 2015
Posts: 1,792
Location:
Likes: 617
Recent Posts
Last Online May 23, 2016 19:46:11 GMT
|
Post by nanotm on Jan 5, 2016 23:02:54 GMT
In the end I went for the RBA Nautilus and I ordered it on the 17th of Dec. All 7 arrived today via Hong Kong Post. I am very pleased with the quality, price and speed of arrival. Thanks nanotm and all the rest that answered this query. on thing I will say is try to keep it no lower than 0.9ohms the airflow in the tank wont stand for lower power, ive messed about quite a bit in the last couple of weeks even built one on ni200 down at 0.09ohms .... it tasted horrible and basically didn't work very well at all so I am going to stick with 6 or 7 wraps of 28awg a1 @2.0mm ID which is basically what the supplied pre built coils are, sadly ive burnt out more wicks than i have coils but i enjoy the fun of messing about somewhat, the only real problem so far has bene the need to use a tank base assembly to check the build before i wick it, i don't have a spare one .....something i will fix when if /when my order ever arrives from china, oddly it took less than a week for the 3 rba's i ordered to arrive, indeed i had the one before they added the extra tank top seal into the pack, now i have another two and will probably buy a 4th just so i can have a spare ready to go but that rather depends on what happens when the tfv4 and the crius arrive, because i might relegate the nauties to shelf space if i like those tanks
|
|