Evod Denture Tab Soak Question

[siffy]

I made the big mistake of not writing down the tips as I saw them, so if I could get help here I will add them to my beloved note pad.

So when I find it starts to taste yucky, I unscrew the evod, then do I remove the pin apart on top of the wick then soak? Or does the whole bottom part go in?

Just need an idiots guide step by step please.

Plus Romelee gave a tip about soaking new attys in warm water over night, then dry burn, so again, pin in or out. I haven't faffed with the pin, not done a ruddy Siffy without first checking.

Need an idiots guide please guys.

[Perpetua]

Just the coil unit I pop in to soak Siffy, the part that unscrews and you replace.


This bit . . .

www.vapeescape.co.uk/Vaping-Spares/Clearomisers/EVOD-Atomiser-Heads-5.html

[siffy]

Jun 29, 2013 12:06:36 GMT Perpetua said:

Just the coil unit I pop in to soak Siffy, the part that unscrews and you replace.

So I do not remove the pin thing, just pop it in, no messing with pliers, hopefully;) I questioned it as I saw a video the other day, they removed the pin for something or other and just wanted to make sure it wasn't for this. Thanks.

[Perpetua]

I don't Siffy . . . but that's just my way of doing it. Any cleaning is any going to give a temporary reprieve unless you recoil it from scratch, they are disposable items ultimately.

And if you want to rewick/coil, then Rom's guide is the one to look at:

allaboute-cigarettes.proboards.com/thread/22461/evod-protank-tips-tricks?page=1&scrollTo=417075 

[Roscopecotrain]

We just bases and heads in the denture tablets as the ones we use took the paint off the evod and my novas.

[siffy]

Thank you both. Will pop some denture tabs in my basket next time am shopping.

[siffy]

Jun 29, 2013 12:14:37 GMT Perpetua said:

I don't Siffy . . . but that's just my way of doing it. Any cleaning is any going to give a temporary reprieve unless you recoil it from scratch, they are disposable items ultimately.

And if you want to rewick/coil, then Rom's guide is the one to look at:

allaboute-cigarettes.proboards.com/thread/22461/evod-protank-tips-tricks?page=1&scrollTo=417075 

That will be something I might try in the future, not yet though. Would love a re coiling class in my area, would be perfect for me, I would even supply the Red Velvet cup cakes..lol

[OneDay]

siffy the pin thing you're talking about needs to come out for re-wicking and dry-burning, but not for soaking

[siffy]

Jun 29, 2013 14:54:41 GMT OneDay said:

siffy the pin thing you're talking about needs to come out for re-wicking and dry-burning, but not for soaking

Right, so once soaked and dry out for a dry burn. Would it make a huge difference if I didn't?

[Karma]

Jun 29, 2013 15:32:00 GMT siffy said:

Jun 29, 2013 14:54:41 GMT OneDay said:

siffy the pin thing you're talking about needs to come out for re-wicking and dry-burning, but not for soaking

Right, so once soaked and dry out for a dry burn. Would it make a huge difference if I didn't?

Probably not unless the coil was really gunky

[siffy]

Jun 29, 2013 15:40:38 GMT Karma said:

Jun 29, 2013 15:32:00 GMT siffy said:

Right, so once soaked and dry out for a dry burn. Would it make a huge difference if I didn't?

Probably not unless the coil was really gunky

Thank you.

[siffy]

Guys, I nipped out and made a purchase so it is currently soaking. Is that for a few hours or overnight?

I. (Amazingly) get the bit about letting it dry out completley, or it just creates steam?

The sad part is am currently nipping out for denture tabs to vape, and will chuck one down the loos tonivht, but am thinking will there come a time I am nipping out for them for my teeth, will I be saying..Lee, just popped my atty and dentures in for a soak? Will I be on here checking if they can both go in the same pot? Sheesh kebab, I hope not.

[Perpetua]

Overnight I let mine sit for Siffy, then a good rinse out with some very hot water . . . after that, just let them dry out fully. A sunny windowsill is ideal at the moment.

I use those denture tablets for descaling my steamer, work a treat they do. Bicarbonate of Soda they contain, so one of those old but very effective for our purposes aids.

[siffy]

Jun 29, 2013 17:49:47 GMT Perpetua said:

Overnight I let mine sit for Siffy, then a good rinse out with some very hot water . . . after that, just let them dry out fully. A sunny windowsill is ideal at the moment.

I use those denture tablets for descaling my steamer, work a treat they do. Bicarbonate of Soda they contain, so one of those old but very effective for our purposes aids.

They are good aren't they. We live in a hard water area so am on the ball with the lime scale mission, have to be really. I use a lot of pure lemon juice and white vinegar too, but know not to put on my attys..lol

Thank you, will leave them soaking overnight.

[punisher]

personaly I never soak them waist of time rinse under the tapblow excess water off dry burn refill job donr 5 mins tops